---
title: "Driveway lights not working | 5.0 Star · From £50 | TMB Electrics"
description: "Driveway lights not working in Banstead? TMB Electrics traces faults in outdoor lighting circuits, fittings and controls, then explains the repair needed."
canonical: "https://www.tmbelectrics.co.uk/problems/driveway-light-not-working"
---

# Driveway lights not working

> Driveway lights not working in Banstead? TMB Electrics traces faults in outdoor lighting circuits, fittings and controls, then explains the repair needed.

TMB Electrics traces driveway lighting faults in Banstead, finding the affected circuit or fitting and explaining the work needed to restore the lights.

## Why are my driveway lights not working?

Driveway lights can fail when water reaches an outdoor fitting, a control stops switching, or a fault develops on the circuit that supplies the lights.
- **Water in an outdoor fitting:** Rainwater can reach a light fitting, connection or outdoor enclosure and cause the circuit to switch off. The affected part needs testing before the lights are used again.
- **A failed light fitting:** A damaged lamp holder, internal connection or light fitting can stop one light or several lights from working. Testing identifies whether the fault is in the fitting or further back on the circuit.
- **A control has stopped switching:** A switch, timer or sensor can stop the driveway lights coming on when expected. Testing checks the control and the supply that reaches it.
- **A fault on the outdoor circuit:** Damage to a cable or connection can interrupt power to lights further along the driveway. Testing finds where the supply stops.

## What can I check safely before booking?

You can check what has stopped working and note the pattern without opening fittings, removing covers or touching mains wiring.
- **Check which lights are off:** Note whether one light, every driveway light, or other outdoor equipment has stopped working. This helps identify whether the problem is limited to one fitting or affects the circuit.
- **Note the weather and timing:** Record whether the lights stopped after rain, at dusk, or when a timer or sensor should have switched them on. These details help focus the testing.
- **Look for visible damage:** Do not use a fitting with cracking, scorch marks, smoke, a burning smell or unusual warmth. Leave the affected lights off and arrange electrical fault finding.

## When should I book driveway lighting fault finding?

Book Now when the driveway lights remain off, the circuit switches off again, or an outdoor fitting shows damage or overheating.
- **The lights stay off:** Lights that do not return after a simple control check need testing. The fault may be in a fitting, cable, connection or the circuit protection.
- **The circuit switches off again:** A circuit that switches off after being restored needs investigation. Repeated resetting can leave a fault connected to the outdoor installation.
- **There is heat or visible damage:** Scorching, smoke, a burning smell or a hot fitting needs the affected circuit left unused while the electrical fault is traced.

## What happens when driveway lights are not working?

The visit starts with the lights and controls that have failed, then follows the outdoor circuit through testing until the fault is identified.
- **The affected lights are identified:** The driveway lights, controls and consumer unit are checked to establish which circuit supplies the fault.
- **The outdoor circuit is tested:** Testing narrows the fault through the fittings, controls, connections and cable until the failed part or section is found.
- **The repair is explained:** The cause and the work needed are explained once testing identifies the fault. Any repair beyond the diagnostic visit is priced when the required work is known.

## What does driveway lighting fault finding cover?

The price covers time spent investigating the driveway lighting circuit and identifying why the lights have stopped working. It changes when testing finds a failed fitting, control, cable, connection or repair that needs replacement parts.
- Fault finding & repair: from £80 an hour
- Testing covers the affected outdoor lighting circuit, fittings and controls linked to the fault.
- Replacement parts and repair work are priced once the cause is known.
- A fault in a connected item may need separate repair or replacement.

## Driveway lights not working questions

### Why do my driveway lights stop working after rain?

Water can reach an outdoor light fitting, connection or cable and cause the circuit to switch off. Note whether the fault follows rain and leave any damaged fitting unused until the circuit has been tested.

### Can one failed driveway light stop the others working?

Yes, a failed connection or fitting can interrupt power to lights further along the same circuit. Testing shows whether the fault is at one light, a connection, a control or the cable between them.

### Should I keep switching the driveway lights back on?

No, do not keep restoring a circuit that switches off again. Leave the affected lights unused and book electrical fault finding to identify what is causing the trip.

### Can a timer or sensor stop driveway lights working?

Yes, a timer or sensor can stop switching the lights on when expected. Testing checks whether the control has failed or whether the problem is in the lighting circuit it controls.

## Related problems
- [Burning plastic smell from electrics](https://www.tmbelectrics.co.uk/problems/burning-plastic-smell-electrical): A burning plastic smell needs the affected electrical circuit checked before it is used again.
- [Circuit breaker keeps tripping](https://www.tmbelectrics.co.uk/problems/circuit-breaker-keeps-tripping): A repeated trip usually means a circuit, fitting or connected item needs testing.
- [Circuit breaker will not reset](https://www.tmbelectrics.co.uk/problems/circuit-breaker-wont-reset): A circuit breaker that stays off needs the affected circuit checked for a fault.
- [Consumer unit is hot](https://www.tmbelectrics.co.uk/problems/consumer-unit-hot): A hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- [Consumer unit tripping with nothing plugged in](https://www.tmbelectrics.co.uk/problems/consumer-unit-tripping-nothing-plugged-in): A trip with nothing plugged in usually needs the fixed circuit traced and tested.
- [Cooker tripping the electrics](https://www.tmbelectrics.co.uk/problems/cooker-tripping-electrics): A cooker trip can come from its circuit, connection or the appliance itself.

## Sources
- [BS 7671: IET Wiring Regulations](https://electrical.theiet.org/bs-7671/)
- [IET guidance and codes of practice](https://electrical.theiet.org/guidance-and-codes-of-practice/publications-by-category/bs-7671-and-guidance/)
- [Electrical Safety First safety guidance](https://www.electricalsafetyfirst.org.uk/guidance/)

Updated 2026-11-19.

[Electrical fault finding](https://www.tmbelectrics.co.uk/services/electrical-fault-finding)

## Book or ask a question
- [Book Now](https://www.tmbelectrics.co.uk/#chat)
