---
title: "Electric gate not working | 5.0 Star · From £50 | TMB Electrics"
description: "Electric gate not working in Banstead? TMB Electrics traces the supply, controls and safety devices to identify the fault and needed repair."
canonical: "https://www.tmbelectrics.co.uk/problems/electric-gate-not-working"
---

# Electric gate not working

> Electric gate not working in Banstead? TMB Electrics traces the supply, controls and safety devices to identify the fault and needed repair.

TMB Electrics traces an electric gate fault in Banstead, identifies the affected supply or control, and explains the repair needed before work changes.

## Why is my electric gate not working?

An automatic gate can stop when its power supply, control equipment, safety device or moving parts develop a fault.
- **The gate supply has lost power:** A tripped circuit, damaged outdoor cable or failed connection can stop power reaching the gate motor. Testing identifies whether the fault is at the supply, cable or gate equipment.
- **The remote control is not sending a signal:** A flat remote battery or lost pairing can stop the gate responding. The gate may still operate from another control or fixed switch when the supply is live.
- **A safety device is stopping the gate:** Photocells are safety sensors that stop a gate closing when something blocks its path. Dirt, damage or a misaligned sensor can prevent normal movement.
- **The gate is binding or obstructed:** Leaves, stones or an object in the gate path can stop movement. A gate that catches, drags or stops part way can also put extra load on the motor.

## What can I check safely before booking?

You can check the gate path, controls and visible equipment without opening the motor housing or touching any electrical wiring.
- **Check the gate path:** Look for leaves, stones, bins or other objects stopping the gate from moving. Keep people, pets and vehicles clear while the gate is not working properly.
- **Try the remote control battery:** Fit a new battery if the remote has one you can replace without opening electrical equipment. Keep the old battery away from children and do not force the remote casing.
- **Look at the safety sensors:** Wipe dirt from the outside of the photocell lenses with a dry cloth. Do not move, dismantle or adjust the sensors.
- **Note what the gate does:** Record whether the gate is completely still, opens but will not close, stops part way or makes an unusual sound. This helps identify the affected part of the installation.

## When should I book electrical fault finding?

Book electrical fault finding when the gate remains off, its controls do not respond, or the electrical supply needs testing.
- **The gate has no power:** A gate that does not respond to any control may have lost its electrical supply. The circuit, cable and connections need testing before repair work starts.
- **The gate stops or reverses unexpectedly:** A gate that stops part way or reverses can have a safety sensor, control or motor fault. Keep the gate clear and avoid repeated attempts to operate it.
- **There are signs of electrical damage:** A burning smell, smoke, scorch marks or damaged cable needs the affected circuit left unused. Electrical fault finding can identify the immediate cause.

## What happens when an electric gate is checked?

The visit follows the electrical supply from the consumer unit or gate circuit through the controls and safety devices.
- **The supply is identified:** The gate circuit and its isolation point are checked to establish whether power is reaching the gate equipment.
- **The controls and safety devices are tested:** Testing checks the gate controls, photocells and electrical connections to narrow the fault to the relevant part.
- **The fault is explained:** The failed electrical part or remaining repair is explained once testing identifies the cause. Repair work is priced when the required work is known.

## What does electric gate fault finding cover?

The price covers the time needed to test the electrical supply, controls and safety devices connected to the gate. It changes when testing finds a failed part, damaged cable, replacement component or repair beyond the investigation.
- Fault finding & repair: from £80 an hour
- Testing covers the gate circuit and the electrical equipment linked to the fault.
- Replacement parts and repair work are priced after the cause is known.
- A fault within the gate mechanism may need separate gate repair work.

## Electric gate fault finding questions

### Why will my electric gate not open?

The gate may have lost power, a control may not be sending a signal, or a safety device may be stopping movement. Testing identifies whether the fault is in the electrical supply, control equipment or gate system.

### Can I reset an electric gate myself?

You can check the remote battery and remove visible objects from the gate path. Do not open the motor housing, alter wiring or repeatedly reset a circuit that switches off again.

### Why does my electric gate open but not close?

A safety sensor can stop a gate closing if it detects an obstruction or cannot see its matching sensor. Dirt, damage or misalignment can affect the sensors, while testing checks the electrical controls.

### Can rain stop an electric gate working?

Water can affect an outdoor cable, connection, control box or safety sensor. Note whether the fault follows rain and leave damaged electrical equipment unused until it has been checked.

## Related problems
- [Burning plastic smell from electrics](https://www.tmbelectrics.co.uk/problems/burning-plastic-smell-electrical): A burning plastic smell needs the affected electrical circuit checked before it is used again.
- [Circuit breaker keeps tripping](https://www.tmbelectrics.co.uk/problems/circuit-breaker-keeps-tripping): A repeated trip usually means a circuit, fitting or connected item needs testing.
- [Circuit breaker will not reset](https://www.tmbelectrics.co.uk/problems/circuit-breaker-wont-reset): A circuit breaker that stays off needs the affected circuit checked for a fault.
- [Consumer unit is hot](https://www.tmbelectrics.co.uk/problems/consumer-unit-hot): A hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- [Consumer unit tripping with nothing plugged in](https://www.tmbelectrics.co.uk/problems/consumer-unit-tripping-nothing-plugged-in): A trip with nothing plugged in usually needs the fixed circuit traced and tested.
- [Cooker tripping the electrics](https://www.tmbelectrics.co.uk/problems/cooker-tripping-electrics): A cooker trip can come from its circuit, connection or the appliance itself.

## Sources
- [BS 7671: IET Wiring Regulations](https://electrical.theiet.org/bs-7671/)
- [HSE: Electrical safety](https://www.hse.gov.uk/electricity/)
- [Electrical Safety First: Safety guidance](https://www.electricalsafetyfirst.org.uk/guidance/)

Updated 2026-11-19.

[Electrical fault finding](https://www.tmbelectrics.co.uk/services/electrical-fault-finding)

## Book or ask a question
- [Book Now](https://www.tmbelectrics.co.uk/#chat)
