---
title: "Electric heater not working | 5.0 Star · From £50 | TMB Electrics"
description: "Electric heater not working in Banstead? TMB Electrics traces faults in heater supplies, controls and circuits, then explains the repair needed."
canonical: "https://www.tmbelectrics.co.uk/problems/electric-heater-not-working"
---

# Electric heater not working

> Electric heater not working in Banstead? TMB Electrics traces faults in heater supplies, controls and circuits, then explains the repair needed.

An electric heater that stays cold may have a supply, control or heater fault. TMB Electrics traces the electrical cause in Banstead and explains the work needed.

## Why is my electric heater not working?

An electric heater can stop heating because the circuit has switched off, the heater control has failed or a fault has developed in the fixed electrical supply.
- **The heater circuit has switched off:** A circuit breaker is a switch in the consumer unit that cuts power when it detects a fault. The heater can stay cold when its circuit is off.
- **The heater control is not calling for heat:** A timer, thermostat or wall control can stop the heater receiving a heating signal. Testing separates a control fault from a supply fault.
- **A fixed connection has failed:** A loose or damaged connection at an isolator, control or fixed heater can interrupt the supply. Electrical testing identifies where power stops.
- **The heater has an internal fault:** A fault inside the heater can stop it warming up or cause its circuit to switch off. Appliance repair sits separately from work on the fixed installation.

## What can I check safely before booking?

You can check the heater controls and note the fault without opening the appliance, removing covers or touching mains wiring.
- **Check the heater setting:** Check that the heater is switched on and that its timer or thermostat is set to call for heat. Note any display message or warning light.
- **Check whether other power is affected:** See whether nearby sockets, lights or other heaters still work. This helps show whether the problem is limited to one heater or its circuit.
- **Look for visible damage:** Do not use the heater if it has scorch marks, cracking, smoke, unusual warmth or a burning smell. Leave it switched off.

## When should I book electrical fault finding?

Book electrical fault finding when the heater remains cold, its circuit switches off again or the controls do not explain the loss of heat.
- **The heater stays cold:** A heater that remains cold with the controls on needs its supply and fixed connections tested before electrical work is chosen.
- **The circuit switches off again:** A breaker that switches off again can indicate a fault on the circuit or connected heater. Leave the circuit off rather than repeatedly resetting it.
- **There are signs of overheating:** A burning smell, smoke, scorching or heat around an electrical fitting needs attention. Stop using the affected heater and circuit.

## What happens when an electric heater is not working?

The visit starts with the heater, its controls and the circuit that supplies it, then testing identifies whether the fixed installation has a fault.
- **The heater supply is identified:** The consumer unit, heater controls and affected area are checked to identify the circuit and isolation point serving the heater.
- **The circuit and controls are tested:** Testing checks the fixed supply, protective device and controls until the electrical fault is identified or the heater is separated from the installation.
- **The repair is explained:** The cause of the fixed electrical fault is explained before repair work is priced. A fault inside the heater is identified as appliance work.

## What does electric heater fault finding cover?

The price covers time spent investigating the heater circuit, fixed supply and controls to identify why the heater is not working. The price changes when testing finds a failed control, damaged connection, replacement part or repair beyond the investigation.
- Fault finding & repair: from £80 an hour
- Testing covers the fixed electrical supply, controls and circuit connected to the heater.
- Parts and repair work are priced after the electrical cause is known.
- A fault inside the heater may need separate appliance repair or replacement.

## Electric heater not working questions

### Why is my electric heater on but not heating?

The heater may have a control fault, a supply fault or an internal fault. Electrical fault finding checks the circuit and fixed controls to establish whether the cause is in the installation or the heater.

### Can one electric heater trip the circuit?

Yes, a fault in a heater or its electrical supply can cause a circuit breaker to switch off. Leave the circuit off if it will not stay on, then arrange testing.

### Can you repair the heater itself?

TMB Electrics investigates the fixed electrical supply, circuit and controls. If testing identifies a fault inside the heater, the heater needs separate appliance repair or replacement.

## Related problems
- [Burning plastic smell from electrics](https://www.tmbelectrics.co.uk/problems/burning-plastic-smell-electrical): A burning plastic smell needs the affected electrical circuit checked before it is used again.
- [Circuit breaker keeps tripping](https://www.tmbelectrics.co.uk/problems/circuit-breaker-keeps-tripping): A repeated trip usually means a circuit, fitting or connected item needs testing.
- [Circuit breaker will not reset](https://www.tmbelectrics.co.uk/problems/circuit-breaker-wont-reset): A circuit breaker that stays off needs the affected circuit checked for a fault.
- [Consumer unit is hot](https://www.tmbelectrics.co.uk/problems/consumer-unit-hot): A hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- [Consumer unit tripping with nothing plugged in](https://www.tmbelectrics.co.uk/problems/consumer-unit-tripping-nothing-plugged-in): A trip with nothing plugged in usually needs the fixed circuit traced and tested.
- [Cooker tripping the electrics](https://www.tmbelectrics.co.uk/problems/cooker-tripping-electrics): A cooker trip can come from its circuit, connection or the appliance itself.

## Sources
- [Energy Saving Trust: Heating Your Home](https://energysavingtrust.org.uk/advice/heating-your-home/)
- [Electrical Safety First: Safety Guidance](https://www.electricalsafetyfirst.org.uk/guidance/)
- [HSE: Electrical Safety at Work](https://www.hse.gov.uk/electricity/)

Updated 2026-11-19.

[Electrical fault finding](https://www.tmbelectrics.co.uk/services/electrical-fault-finding)

## Book or ask a question
- [Book Now](https://www.tmbelectrics.co.uk/#chat)
