---
title: "Electric shower not working | 5.0 Star · From £50 | TMB Electrics"
description: "Electric shower not working in Banstead? Tests identify whether the fault is in the circuit, isolator, protective device or shower unit."
canonical: "https://www.tmbelectrics.co.uk/problems/electric-shower-not-working"
---

# Electric shower not working

> Electric shower not working in Banstead? Tests identify whether the fault is in the circuit, isolator, protective device or shower unit.

An electric shower with no power or no hot water may have a supply fault or a failed shower unit. TMB Electrics tests the electrical circuit and identifies the cause in Banstead.

## Why is my electric shower not working?

An electric shower can stop working because its electrical supply has switched off, a connection has failed, or the shower unit has developed an internal fault.
- **The shower circuit has switched off:** The shower has its own high load circuit from the consumer unit. A breaker or RCD may switch the circuit off when it detects a fault.
- **The pull cord isolator has failed:** The pull cord isolator is the switch that disconnects power to the shower. A failed switch or connection can stop power reaching the unit.
- **A connection has overheated:** A loose connection at the consumer unit, isolator or shower supply can heat up and interrupt power. This needs electrical testing before the circuit is used again.
- **The shower unit has an internal fault:** The heating element, controls or other parts inside the shower can fail. Testing separates a fault in the fixed electrical supply from a fault in the shower unit.

## What can I check safely before booking?

You can check the visible controls and note what happens without removing covers, opening the shower or touching any electrical wiring.
- **Check the consumer unit from the outside:** Look for a breaker or RCD in the off position without removing the consumer unit cover. Note whether other circuits in the property still have power.
- **Note what the shower does:** Note whether the shower has no lights, no water flow, cold water only, reduced flow or a trip when it is switched on. This helps identify the affected part.
- **Look for visible heat damage:** Do not use the shower if the pull cord, cable, consumer unit or shower casing has scorching, smoke, cracking, unusual warmth or a burning smell.

## When should I book an electrician for an electric shower?

Book Now when the shower circuit will not stay on, the shower has lost power, or any part of the electrical installation shows heat damage.
- **The shower has no power:** A shower with no lights or response from its controls needs the circuit, isolator and supply tested to find where power has stopped.
- **The circuit trips when the shower runs:** A breaker or RCD that switches off when the shower is used needs investigation. Leave the shower circuit unused rather than repeatedly restoring power.
- **There is heat, smoke or scorching:** A burning smell, smoke, scorch marks or unusual warmth at the shower, pull cord or consumer unit needs the affected circuit left off for urgent attention.

## What happens when an electric shower is not working?

The visit starts with the shower circuit and its controls, then testing identifies whether the fault is in the fixed supply or the shower unit.
- **The shower circuit is identified:** The consumer unit, pull cord isolator and shower connection are checked to establish how the shower is supplied and protected.
- **The electrical supply is tested:** The shower circuit is isolated and tested through the protective device, cable and isolator until the cause is narrowed to the fixed installation or shower unit.
- **The cause is explained:** The failed part or remaining work is explained once testing is complete. Electrical repair work is priced when the required work is known.

## What does electric shower fault finding cover?

The price covers the time needed to test the electric shower circuit, isolator and supply, then identify whether the fault is in the fixed installation or the shower unit. The price changes if testing finds a failed electrical part, damaged cable or work that needs replacement materials.
- Fault finding & repair: from £80 an hour
- Testing covers the shower circuit, consumer unit protection, isolator and electrical connection.
- Electrical repair work and replacement materials are priced once the cause is known.
- A fault inside the shower unit may need repair or replacement separately.

## Electric shower fault questions

### Why does my electric shower have water but no heat?

The shower may have power for its controls but a failed heating element or another internal fault. Testing checks the electrical supply first and identifies whether power is reaching the shower correctly.

### Why does my electric shower keep tripping the power?

A trip can come from the shower circuit, its cable, the isolator or a fault inside the shower unit. Leave the shower circuit off if it trips again, then book electrical testing to identify the cause.

### Can I replace my electric shower with a more powerful one?

Only when the cable, breaker and isolator are suitable for the new shower rating. A higher rated shower can need changes to the circuit before it is connected.

### Does a failed pull cord stop an electric shower working?

Yes, a failed pull cord isolator or its connection can stop power reaching the shower. The switch and its supply need testing before a replacement is fitted.

## Related problems
- [Burning plastic smell from electrics](https://www.tmbelectrics.co.uk/problems/burning-plastic-smell-electrical): A burning plastic smell needs the affected electrical circuit checked before it is used again.
- [Circuit breaker keeps tripping](https://www.tmbelectrics.co.uk/problems/circuit-breaker-keeps-tripping): A repeated trip usually means a circuit, fitting or connected item needs testing.
- [Circuit breaker will not reset](https://www.tmbelectrics.co.uk/problems/circuit-breaker-wont-reset): A circuit breaker that stays off needs the affected circuit checked for a fault.
- [Consumer unit is hot](https://www.tmbelectrics.co.uk/problems/consumer-unit-hot): A hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- [Consumer unit tripping with nothing plugged in](https://www.tmbelectrics.co.uk/problems/consumer-unit-tripping-nothing-plugged-in): A trip with nothing plugged in usually needs the fixed circuit traced and tested.
- [Cooker tripping the electrics](https://www.tmbelectrics.co.uk/problems/cooker-tripping-electrics): A cooker trip can come from its circuit, connection or the appliance itself.

## Sources
- [BS 7671: IET Wiring Regulations (18th Edition)](https://electrical.theiet.org/bs-7671/)
- [Electrical Safety First: Safety Guidance](https://www.electricalsafetyfirst.org.uk/guidance/)
- [NICEIC: Householder Guidance](https://niceic.com/householders/)

Updated 2026-11-19.

[Electrical fault finding](https://www.tmbelectrics.co.uk/services/electrical-fault-finding)

## Book or ask a question
- [Book Now](https://www.tmbelectrics.co.uk/#chat)
