---
title: "Electrical fire: what to do | 5.0 Star · From £50 | TMB Electrics"
description: "Electrical fire at home in Banstead: get out, stay out and call 999. Learn what can cause it and when electrical work is needed. · 5.0 Star from 39 reviews"
canonical: "https://www.tmbelectrics.co.uk/problems/electrical-fire-what-to-do"
---

# Electrical fire: what to do

> Electrical fire at home in Banstead: get out, stay out and call 999. Learn what can cause it and when electrical work is needed. · 5.0 Star from 39 reviews

If an electrical fire starts, get everyone out, stay out and call 999. TMB Electrics can make the affected electrical installation safe after the fire service has dealt with the fire.

## What can cause an electrical fire at home?

An electrical fire can start when a damaged connection, cable or plug in item overheats. Smoke, a burning smell and scorch marks all need the affected electrical supply left unused.
- **A damaged plug or lead:** A damaged plug, lead or extension lead can overheat where electricity passes through a loose or damaged connection. Do not use an item with scorch marks, cracking or a burning smell.
- **An overloaded extension lead:** Too many high demand items on one extension lead can cause the plug, socket or lead to overheat. Use fixed sockets for appliances that draw a large electrical load.
- **A loose connection in a fitting:** A loose connection in a socket, switch, light fitting or consumer unit can create heat. The heat can damage the surrounding fitting and wiring.
- **Damaged fixed wiring:** Damage to fixed wiring can cause overheating or a fault on the circuit. The damaged section needs electrical testing before the circuit is used again.

## What can I check safely after an electrical fire?

After everyone is safe and the fire service has dealt with the fire, only check what can be seen without touching electrical equipment. Leave appliances, sockets, switches and the consumer unit closed.
- **Note where the fire started:** Note whether the fire involved a plug in appliance, socket, light fitting, extension lead or another visible electrical item. This helps identify the circuit that needs checking.
- **Photograph visible damage from a distance:** Photographs can show scorch marks, smoke damage and the affected area without handling damaged equipment. Do not move or take apart the item that caught fire.
- **Keep damaged equipment unused:** Leave the affected appliance, plug, socket or fitting unused. Do not reconnect an appliance or restore use of a circuit until the fixed installation has been checked.

## When should I book electrical work after a fire?

Book Now after the fire service has dealt with the fire and the electrical installation needs making safe or testing. A damaged circuit or fitting needs checking before it returns to use.
- **A socket, plug or fitting is scorched:** Scorching around a socket, plug, switch or light fitting can mean heat has damaged the connection behind it. The affected circuit needs testing and making safe.
- **A circuit has tripped or stayed off:** A circuit that has switched off after an electrical fire needs checking before it is restored. The cause may be in the fitting, cable or connected item.
- **Smoke affected the consumer unit:** Smoke or heat around the consumer unit needs electrical assessment before circuits are used. The consumer unit and the circuits it protects may need testing.

## What happens when TMB Electrics visits after an electrical fire?

The visit starts with the damaged area and the electrical circuit that supplied it. The affected part is made safe before testing establishes what repair is needed.
- **The damaged circuit is identified:** The affected socket, fitting or appliance connection is matched to its circuit at the consumer unit. This identifies which part of the installation needs to stay isolated.
- **The electrical danger is made safe:** The damaged circuit, fitting or connection is isolated so it cannot remain in use. Safe circuits can remain available where they are separate from the damage.
- **The fixed wiring is tested:** Testing checks the circuit, protective device and visible damaged electrical parts. This separates a fault in the fixed installation from a fault in a connected appliance.
- **The repair is set out:** The damaged electrical parts and the work needed are explained after testing. Repair work is priced once the required parts and work are known.

## What does electrical fire make safe work cover?

The price covers attendance to identify the immediate electrical danger, isolate the affected circuit or fitting, and test the damaged part of the fixed installation. The price changes when fire damage reaches more than one circuit, needs replacement parts, or requires repair work after the installation is made safe.
- EICR — domestic: from £150; £150: 7 included (circuit); £20 for each additional one.
- EICR — commercial: from £150; £150: 7 included (circuit); £20 for each additional one.
- Making safe covers isolation of the affected electrical danger and checks on the circuit involved.
- Replacement sockets, switches, fittings, cables or consumer unit work are priced after the damaged parts are identified.
- A fault inside a plug in appliance may need separate repair or replacement.

## Electrical fire questions

### What should I do if an electrical fire starts?

Get everyone out of the property, stay out and call 999. Do not go back for belongings or touch the appliance, socket, fitting or consumer unit involved.

### Can I use water on an electrical fire?

No. Do not use water on an electrical fire. Get everyone out, stay out and call 999 so the fire service can deal with the fire.

### Can I use the circuit again after a small electrical fire?

No. A small fire can damage connections, insulation and electrical fittings that cannot be checked by looking at the surface. The affected circuit needs making safe and testing before it returns to use.

### Can TMB Electrics repair electrical fire damage?

TMB Electrics can make the affected circuit safe and test the fixed wiring after the fire service has dealt with the fire. Any repair beyond making safe is set out after the damaged electrical parts are identified.

## Related problems
- [Aluminium wiring in the house](https://www.tmbelectrics.co.uk/problems/aluminium-wiring): Aluminium wiring needs inspection and testing before any repair, upgrade or added circuit.
- [Buying a house with old electrics](https://www.tmbelectrics.co.uk/problems/buying-house-old-electrics): An EICR checks the fixed wiring so you know its condition before buying.
- [Flooded electrics after leak or flood](https://www.tmbelectrics.co.uk/problems/flooded-electrics): Water damaged electrics need testing before affected circuits, fittings or fixed equipment are used again.
- [House not up to electrical regulations](https://www.tmbelectrics.co.uk/problems/house-not-up-to-electrical-regs): An EICR identifies fixed wiring that needs repair, improvement or further investigation.
- [How to tell if your house needs rewiring](https://www.tmbelectrics.co.uk/problems/signs-house-needs-rewiring): An EICR can show whether fixed wiring needs rewiring, partial renewal or repair.
- [Is my metal fuse box safe?](https://www.tmbelectrics.co.uk/problems/metal-fuse-box): A metal fuse box needs inspection when its condition, protection or connected circuits are unknown.

## Sources
- [HSE: Electrical safety at work](https://www.hse.gov.uk/electricity/)
- [Electrical Safety First: Safety guidance](https://www.electricalsafetyfirst.org.uk/guidance/)
- [GOV.UK: Fire safety in the home](https://www.gov.uk/government/publications/make-your-home-safe-from-fire)

Updated 2026-11-19.

[EICR and electrical testing](https://www.tmbelectrics.co.uk/services/eicr)

## Book or ask a question
- [Book Now](https://www.tmbelectrics.co.uk/#chat)
