---
title: "EV charger showing an error light | 5.0 Star · From £50"
description: "EV charger error light in Banstead? Find out what can cause it, what you can check safely and when electrical fault finding is needed. · Call 07460 070551"
canonical: "https://www.tmbelectrics.co.uk/problems/ev-charger-error-light"
---

# EV charger showing an error light

> EV charger error light in Banstead? Find out what can cause it, what you can check safely and when electrical fault finding is needed. · Call 07460 070551

An EV charger error light can stop charging when its supply, connection or charger has a fault. TMB Electrics tests the charger circuit in Banstead and identifies the cause.

## Why is my EV charger showing an error light?

An error light can appear when the charger detects a problem with its supply, its connection to the vehicle or equipment connected to the charging circuit.
- **The charger has lost its electrical supply:** A protective device in the consumer unit can switch off when it detects a fault. The charger needs its own circuit checked before charging resumes.
- **The charging lead is not connecting properly:** Damage, dirt or moisture at the vehicle plug or charger socket can interrupt the connection between the car and charge point.
- **The charger has detected a fault:** A charge point can show an error when its internal checks detect a problem. Testing separates a charger fault from a fault on the fixed electrical installation.
- **A connection on the circuit needs attention:** A loose connection or damaged cable can affect the charger supply. Electrical testing identifies whether the fault is at the consumer unit, cable or charger.

## What can I check safely when my EV charger shows an error light?

You can check the charger display, the vehicle connection and visible signs of damage without opening the charger or touching any electrical wiring.
- **Read the charger display:** Note the colour of the light, any message on the display and whether charging stopped before or after the vehicle was connected.
- **Check the charging lead without taking it apart:** Look for visible damage, dirt or water around the plug and socket. Do not use a lead with heat marks, cracking or a burning smell.
- **Check whether other power has changed:** Note whether the charger alone has stopped or whether other circuits have lost power. This helps identify whether the problem may be with the charger supply.

## When should I book EV charger fault finding?

Book electrical fault finding when the error light remains, charging will not start or the charger circuit will not stay on.
- **The error light stays on:** A charger that continues to show an error after the vehicle lead is checked needs testing of the charger and its dedicated circuit.
- **The charger circuit switches off again:** A circuit that switches off again can have a fault in the charger, cable or connected equipment. Leave it unused until it has been tested.
- **There is heat, smoke or scorching:** A burning smell, smoke, scorch marks or unusual warmth at the charger, lead or consumer unit needs the affected circuit left off.

## What happens when an EV charger error light is checked?

The visit starts with the charger and consumer unit, then follows the dedicated charging circuit until the fault is identified.
- **The charging circuit is identified:** The charger, consumer unit and protective devices are checked to establish how the charge point is supplied.
- **The charger and cable are tested:** Testing checks the fixed circuit, cable connections and charger supply to narrow the fault to the part that needs work.
- **The cause is explained:** The fault and any repair needed are explained once testing identifies the cause. Work beyond the investigation is priced when the required repair is known.

## What does EV charger fault finding cover?

The price covers the time needed to investigate the charger error, test its dedicated circuit and identify whether the cause is in the charge point, cable, connection or fixed electrical installation. The price changes when testing finds a repair, replacement part or work beyond the diagnostic visit.
- Fault finding & repair: from £80 an hour
- Testing covers the charge point, its dedicated circuit and the fittings connected to the reported error.
- Repair work and replacement parts are priced once the cause is known.
- A fault inside the vehicle or charging lead may need separate repair or replacement.

## EV charger error light questions

### Can I still use my EV charger with a red error light?

No. Leave the charger unused until the cause of the error has been identified. An error light can indicate a fault in the charger, lead or dedicated electrical circuit.

### Can rain cause an EV charger error light?

Water around a damaged lead, plug or charger connection can affect charging. Note whether the error follows rain, but leave the charger closed and arrange testing if the error remains.

### Can my car cause the charger to show an error?

Yes. The vehicle and charge point communicate before charging starts, so the charger can show an error when that connection fails. Testing can establish whether the fixed installation is working as intended.

### Why does my EV charger trip the consumer unit?

The charger circuit can switch off when a protective device detects a fault. The cause may be in the charge point, cable or fixed circuit, so the charger should remain unused until testing identifies it.

## Related problems
- [Burning plastic smell from electrics](https://www.tmbelectrics.co.uk/problems/burning-plastic-smell-electrical): A burning plastic smell needs the affected electrical circuit checked before it is used again.
- [Circuit breaker keeps tripping](https://www.tmbelectrics.co.uk/problems/circuit-breaker-keeps-tripping): A repeated trip usually means a circuit, fitting or connected item needs testing.
- [Circuit breaker will not reset](https://www.tmbelectrics.co.uk/problems/circuit-breaker-wont-reset): A circuit breaker that stays off needs the affected circuit checked for a fault.
- [Consumer unit is hot](https://www.tmbelectrics.co.uk/problems/consumer-unit-hot): A hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- [Consumer unit tripping with nothing plugged in](https://www.tmbelectrics.co.uk/problems/consumer-unit-tripping-nothing-plugged-in): A trip with nothing plugged in usually needs the fixed circuit traced and tested.
- [Cooker tripping the electrics](https://www.tmbelectrics.co.uk/problems/cooker-tripping-electrics): A cooker trip can come from its circuit, connection or the appliance itself.

## Sources
- [IET: Code of Practice for Electric Vehicle Charging](https://electrical.theiet.org/guidance-and-codes-of-practice/publications-by-category/electric-vehicles/)
- [Electrical Safety First: Safety Guidance](https://www.electricalsafetyfirst.org.uk/guidance/)
- [NICEIC: Householder Guidance](https://niceic.com/householders/)

Updated 2026-11-19.

[Electrical fault finding](https://www.tmbelectrics.co.uk/services/electrical-fault-finding)

## Book or ask a question
- [Book Now](https://www.tmbelectrics.co.uk/#chat)
