---
title: "Problems after EV charger installation | 5.0 Star · From £50"
description: "EV charger installation faults in Banstead, including tripping, charging errors and supply checks for a home charger circuit. · 5.0 Star from 39 reviews"
canonical: "https://www.tmbelectrics.co.uk/problems/ev-charger-installation-issues"
---

# Problems after EV charger installation

> EV charger installation faults in Banstead, including tripping, charging errors and supply checks for a home charger circuit. · 5.0 Star from 39 reviews

A charger that will not charge, trips power or shows an error needs the charger circuit checked. TMB Electrics traces the fixed installation in Banstead and identifies the electrical cause.

## Why is my EV charger not working after installation?

An EV charger needs its own protected circuit, sound connections and a suitable supply. A fault can stop charging, trip the protection or leave the charger showing an error.
- **The charger circuit is tripping:** The protective device can switch off when it detects a fault on the charger circuit. Testing checks the circuit from the consumer unit to the charger connection.
- **A connection or cable has a fault:** A loose connection, damaged cable or fault at the charger connection can interrupt charging. Testing identifies where the circuit has stopped working.
- **The charger or vehicle is not communicating:** Charging can stop when the charger, cable or vehicle does not complete its connection. The charger display and charging behaviour help separate this from a fixed wiring fault.

## What can I check safely before booking?

You can check the charger display, the consumer unit and the charging cable without opening the charger or touching mains wiring.
- **Read the charger display:** Note any light, message or error code shown by the charger. Record whether charging starts and then stops, or does not start at all.
- **Check the consumer unit from the outside:** See whether the charger circuit switch is off or has tripped. Do not remove the consumer unit cover or touch any wiring.
- **Check the charging cable and plug:** Look for visible damage, heat marks or a loose connection at the vehicle end. Do not use a cable that is damaged or unusually warm.

## When should I book EV charger fault finding?

Book fault finding when the charger circuit trips, charging repeatedly stops or the charger cannot be used normally.
- **The charger trips the power:** A charger circuit that switches off again needs testing. Leave the circuit off rather than repeatedly restoring power.
- **The charger will not start charging:** A charger that remains inactive after the cable is connected needs its supply and charging equipment checked.
- **There are signs of overheating:** A burning smell, smoke, scorch marks or unusual warmth at the charger, cable or consumer unit needs the affected circuit left unused.

## What happens during an EV charger fault finding visit?

The visit follows the charger circuit from the consumer unit to the charging position, then explains what has caused the problem.
- **The charger circuit is identified:** The consumer unit, charger position and reported fault are checked to establish how the charger is supplied and protected.
- **The fixed installation is tested:** Testing checks the circuit, protection, cable run and connections that supply the charger.
- **The cause is explained:** The fault or remaining investigation is explained once testing is complete. Repair work is priced when the required work is known.

## What does EV charger fault finding cover?

The price covers time spent investigating the electrical installation that supplies the EV charger. The price changes when testing finds a fault that needs replacement parts, repair work or further investigation.
- EV charger installation (7.4kW): from £400
- Testing covers the fixed electrical installation serving the EV charger.
- A problem with the vehicle, charging cable or charger unit is identified separately from the fixed installation.
- Parts and repair work are priced once the cause is known.

## EV charger installation fault questions

### Why does my EV charger keep tripping?

The charger circuit may have a fault in its protection, cable or connection. A problem with the charger unit, charging cable or vehicle can also affect charging. Testing separates the fixed installation from the charging equipment.

### Should I keep resetting the EV charger circuit?

No. Leave the charger circuit off if it trips again. Repeated resetting can leave a fault connected to the electrical installation.

### Can a damaged charging cable stop my charger working?

Yes. A damaged cable can prevent charging or cause the charger to show an error. Check only for visible damage and leave the cable disconnected if it is damaged, hot or marked.

### Can an old consumer unit affect EV charging?

The charger needs suitable circuit protection and capacity at the consumer unit. Testing checks whether the charger circuit and its supply are working as they should.

## Related problems
- [How far can an EV charger be from the consumer unit?](https://www.tmbelectrics.co.uk/problems/charge-point-too-far-from-the-car): A longer cable run can work when the circuit, cable and charging position are assessed together.
- [Told Your Supply Will Not Take A 7kW Charge Point](https://www.tmbelectrics.co.uk/problems/supply-too-small-for-a-charge-point): A supply check identifies whether a 7kW charge point needs changes before installation.
- [Two electric cars and one charge point](https://www.tmbelectrics.co.uk/problems/two-cars-one-charge-point): One charge point can serve two cars, while a second charger needs its own assessed circuit.
- [Aluminium wiring in the house](https://www.tmbelectrics.co.uk/problems/aluminium-wiring): Aluminium wiring needs inspection and testing before any repair, upgrade or added circuit.
- [Burning plastic smell from electrics](https://www.tmbelectrics.co.uk/problems/burning-plastic-smell-electrical): A burning plastic smell needs the affected electrical circuit checked before it is used again.
- [Burning smell from the fuse box](https://www.tmbelectrics.co.uk/problems/burning-smell-from-fuse-box): A burning smell at the consumer unit can mean an overheating connection or protective device.

## Sources
- [IET: Code of Practice for Electric Vehicle Charging](https://electrical.theiet.org/guidance-and-codes-of-practice/publications-by-category/electric-vehicles/)
- [BS 7671: IET Wiring Regulations](https://electrical.theiet.org/bs-7671/)
- [HM Government: Approved Document P](https://www.gov.uk/government/publications/electrical-safety-approved-document-p)

Updated 2026-11-19.

[EV charger installation](https://www.tmbelectrics.co.uk/services/ev-charger-installation)

## Book or ask a question
- [Book Now](https://www.tmbelectrics.co.uk/#chat)
