---
title: "Extractor fan not working | 5.0 Star · From £50 | TMB Electrics"
description: "Extractor fan not working in Banstead? Find likely causes, checks you can make, when to book, and what happens when the fan is tested. · Call 07460 070551"
canonical: "https://www.tmbelectrics.co.uk/problems/extractor-fan-not-working"
---

# Extractor fan not working

> Extractor fan not working in Banstead? Find likely causes, checks you can make, when to book, and what happens when the fan is tested. · Call 07460 070551

An extractor fan that has stopped can have a failed switch, supply, timer or fan. TMB Electrics tests the circuit and fan in Banstead to identify the fault.

## Why has my extractor fan stopped working?

An extractor fan can stop because the fan itself has failed or because the switch, timer or electrical supply is no longer operating.
- **The fan motor has failed:** The motor turns the blades that draw damp air from the room. A motor that has failed may leave the fan silent, slow or unable to start.
- **The switch or pull cord has failed:** A fan connected to a light switch, pull cord or separate switch cannot run when that control no longer sends power to the fan.
- **The timer has stopped operating:** Some fans continue after the light is turned off. A timer fault can stop that function or stop the fan from starting when the room light comes on.
- **The fan has lost its electrical supply:** A fault in the circuit, fused spur or connection can stop the fan receiving power. Testing identifies whether the problem is in the fan or its supply.

## What can I check safely when an extractor fan stops?

You can check the fan controls and the room conditions without opening the fan, removing covers or touching electrical wiring.
- **Check whether the room light works:** If the fan normally starts with the light, note whether the light still works. This helps show whether the problem may be limited to the fan or its control.
- **Try the normal fan control:** Use the pull cord, wall switch or light switch in the usual way. Note whether the fan makes a sound, starts slowly or stays completely silent.
- **Look for visible damage:** Do not use the fan if you can see cracking, scorch marks or loose parts around the fan or its controls. Leave it switched off.

## When should I book extractor fan fault finding?

Book Now when the fan stays off, the control does not operate it, or the fan makes unusual noise without clearing the room.
- **The fan does not start:** A fan that stays silent after its normal control is used needs testing to establish whether the fault is in the fan, timer, switch or electrical supply.
- **The fan runs but does not clear the room:** A slow or noisy fan may have a failing motor or another fault that stops it removing steam and stale air as it should.
- **The fan has visible heat damage:** Scorching, a burning smell or unusual warmth around the fan or control needs the affected circuit left unused until it has been checked.

## What happens when an extractor fan is tested?

The visit starts with the fan and its control, then tests the circuit and identifies whether the problem is the fan or its electrical supply.
- **The fan and control are checked:** The fan, switch or pull cord and any timer function are checked against the reported fault before electrical testing begins.
- **The circuit is tested:** The fan circuit is isolated and tested to establish whether power reaches the fan and whether the control and connection are operating correctly.
- **The fault and repair are explained:** Once the cause is identified, the failed fan, control or electrical part is explained before any repair or replacement work is priced.

## What does extractor fan fault finding cover?

The price covers the time needed to test the extractor fan, its control and the electrical supply that serves it. The price changes when testing finds that the fan, switch, timer, fused spur or circuit connection needs repair or replacement.
- Extractor fan installation: from £120
- Testing covers the fan, its control and the electrical supply connected to the fault.
- Replacement parts and repair work are priced after the cause is known.
- A new cable run or new circuit is priced separately when the existing supply cannot be used.

## Extractor fan not working questions

### Why has my bathroom extractor fan stopped working?

A bathroom fan can stop because the fan motor, timer, pull cord, light switch or electrical supply has failed. Testing checks whether power reaches the fan and whether the fan can operate once that supply is present.

### Can a fan stop working if the bathroom light still works?

Yes. The fan may have its own fault even when the light remains on. A failed timer, switch, fused spur or fan motor can stop the fan while the rest of the lighting circuit continues to work.

### Can I replace an extractor fan myself?

Do not open the fan or touch its wiring. An extractor fan is connected to the electrical installation, and testing is needed to establish whether the existing supply and control are suitable for a replacement.

### Why does my extractor fan run but not clear steam?

A fan that runs slowly or makes unusual noise may have a failing motor. Testing checks the fan operation and its electrical supply before repair or replacement work is set out.

## Related problems
- [Aluminium wiring in the house](https://www.tmbelectrics.co.uk/problems/aluminium-wiring): Aluminium wiring needs inspection and testing before any repair, upgrade or added circuit.
- [Burning plastic smell from electrics](https://www.tmbelectrics.co.uk/problems/burning-plastic-smell-electrical): A burning plastic smell needs the affected electrical circuit checked before it is used again.
- [Burning smell from the fuse box](https://www.tmbelectrics.co.uk/problems/burning-smell-from-fuse-box): A burning smell at the consumer unit can mean an overheating connection or protective device.
- [Buying a house with old electrics](https://www.tmbelectrics.co.uk/problems/buying-house-old-electrics): An EICR checks the fixed wiring so you know its condition before buying.
- [Circuit breaker keeps tripping](https://www.tmbelectrics.co.uk/problems/circuit-breaker-keeps-tripping): A repeated trip usually means a circuit, fitting or connected item needs testing.
- [Circuit breaker will not reset](https://www.tmbelectrics.co.uk/problems/circuit-breaker-wont-reset): A circuit breaker that stays off needs the affected circuit checked for a fault.

## Sources
- [BS 7671: IET Wiring Regulations](https://electrical.theiet.org/bs-7671/)
- [Electrical Safety First: Safety Guidance](https://www.electricalsafetyfirst.org.uk/guidance/)
- [NICEIC: Householder Guidance](https://niceic.com/householders/)

Updated 2026-11-19.

[Extractor fan installation](https://www.tmbelectrics.co.uk/services/extractor-fan-installation)

## Book or ask a question
- [Book Now](https://www.tmbelectrics.co.uk/#chat)
