---
title: "Flooded electrics after leak or flood | 5.0 Star · From £50"
description: "Flooded electrics after a leak or flood in Banstead need testing before use. TMB Electrics checks the fixed installation and reports its condition."
canonical: "https://www.tmbelectrics.co.uk/problems/flooded-electrics"
---

# Flooded electrics after leak or flood

> Flooded electrics after a leak or flood in Banstead need testing before use. TMB Electrics checks the fixed installation and reports its condition.

Flooded electrics need testing before they are used again. TMB Electrics checks the affected fixed wiring and identifies what needs to stay isolated after a leak or flood.

## Why do electrics become unsafe after a leak or flood?

Water can enter sockets, switches, light fittings, cables and the consumer unit, which is the box that protects the electrical circuits. It can cause faults immediately or after the area looks dry.
- **Water has reached a socket or switch:** A leak through a wall or floor can reach the connections behind a socket or switch. Moisture can create a fault, cause corrosion or leave a fitting unsafe to use.
- **A ceiling leak has reached lighting cables:** Water from above can collect around a ceiling fitting, cable connection or light point. A light can look dry from below while moisture remains above the ceiling.
- **The consumer unit has been exposed to water:** Water near the consumer unit can affect breakers, safety switches and circuit connections. The installation needs checking before circuits are restored.
- **Water has reached fixed electrical equipment:** A flood or leak can affect fixed electrical equipment connected to the installation. Testing separates damage to the fixed wiring from damage inside the equipment.

## What can I check safely after electrics get wet?

You can record what has been affected and look for visible damage without opening any fitting, appliance or electrical enclosure. Do not touch wet electrical equipment or mains wiring.
- **Note where the water came from:** Record whether the water came through a ceiling, wall, floor or outside area. Note the rooms, sockets, lights and fixed equipment near the leak or flood.
- **Look for visible damage without touching:** Look for water marks, dripping fittings, scorch marks, cracking or loose covers. Keep clear of any wet socket, switch, light fitting or consumer unit.
- **Keep affected electrical items unused:** Leave plug in items, extension leads and chargers disconnected if they were wet or close to the water. Do not open an appliance or try to dry it from inside.

## When should flooded electrics be checked?

Flooded electrics should be checked when water has reached or may have reached fixed wiring, a socket, switch, light fitting or consumer unit.
- **Water has reached electrical fittings:** A socket, switch, light fitting or consumer unit close to a leak or flood needs checking before it is used again, even when the water is no longer visible.
- **A circuit trips after the leak:** A breaker or safety switch that will not remain on can indicate water damage on the circuit. Leave the affected circuit unused until it has been tested.
- **There is heat, smoke or scorching:** A burning smell, smoke, scorching or unusual heat around an electrical fitting needs urgent attention. The affected circuit needs to remain off.

## What happens when flooded electrics are checked?

TMB Electrics starts by identifying the water affected areas, then tests the fixed installation before explaining which circuits or fittings can remain in use.
- **Identify the affected circuits:** The consumer unit and the rooms affected by water are checked to establish which circuits supply the nearby sockets, switches, lights and fixed equipment.
- **Test the fixed installation:** Testing checks the circuits, protective devices and affected fittings for damage caused by water. The checks identify whether a circuit can be used or needs further work.
- **Explain the findings:** We explain what water has affected, what needs to stay isolated and what repair or replacement work is needed before the installation is used again.
- **Inspect the installation where needed:** An EICR, meaning an Electrical Installation Condition Report, can check the condition of the fixed wiring and record findings in writing.

## What does flooded electrics testing cover?

The price covers the investigation of water affected electrical circuits and fittings, including testing needed to identify damage to the fixed installation. The price changes when testing finds damaged accessories, cables, protective devices or equipment that need repair, replacement or further inspection.
- EICR — domestic: from £150; £150: 7 included (circuit); £20 for each additional one.
- EICR — commercial: from £150; £150: 7 included (circuit); £20 for each additional one.
- Testing focuses on the circuits and fittings affected by the leak or flood.
- Repair work and replacement parts are priced after the condition of the affected installation is known.
- An EICR is separate work when the fixed installation needs a wider written condition report.

## Flooded electrics questions

### Can I use electrics after a leak has dried up?

No. Water can remain inside a fitting, cable connection or consumer unit after the visible leak has stopped. The affected fixed installation needs testing before it is used again.

### Do I need an electrician after water comes through the ceiling?

Yes, when water has reached or may have reached a light fitting, cable or electrical connection above the ceiling. TMB Electrics tests the affected circuit and identifies whether any part must remain isolated.

### Can a flood make a circuit trip later?

Yes. Water can cause corrosion or leave moisture inside a fitting or connection, so a circuit can develop a fault after the immediate flood has passed. Testing finds which circuit or fitting has been affected.

### Does an EICR check water damaged wiring?

An EICR checks the condition of the fixed electrical installation and records findings in writing. Water damaged circuits may also need fault finding or repair before the installation can be returned to use.

## Related problems
- [Aluminium wiring in the house](https://www.tmbelectrics.co.uk/problems/aluminium-wiring): Aluminium wiring needs inspection and testing before any repair, upgrade or added circuit.
- [Buying a house with old electrics](https://www.tmbelectrics.co.uk/problems/buying-house-old-electrics): An EICR checks the fixed wiring so you know its condition before buying.
- [Electrical fire: what to do](https://www.tmbelectrics.co.uk/problems/electrical-fire-what-to-do): Get out, stay out and call 999. Electrical work starts after the fire is dealt with.
- [House not up to electrical regulations](https://www.tmbelectrics.co.uk/problems/house-not-up-to-electrical-regs): An EICR identifies fixed wiring that needs repair, improvement or further investigation.
- [How to tell if your house needs rewiring](https://www.tmbelectrics.co.uk/problems/signs-house-needs-rewiring): An EICR can show whether fixed wiring needs rewiring, partial renewal or repair.
- [Is my metal fuse box safe?](https://www.tmbelectrics.co.uk/problems/metal-fuse-box): A metal fuse box needs inspection when its condition, protection or connected circuits are unknown.

## Sources
- [HSE: Electrical Safety at Work](https://www.hse.gov.uk/electricity/)
- [Electrical Safety First: Safety Guidance](https://www.electricalsafetyfirst.org.uk/guidance/)
- [BS 7671: IET Wiring Regulations (18th Edition)](https://electrical.theiet.org/bs-7671/)

Updated 2026-11-19.

[EICR and electrical testing](https://www.tmbelectrics.co.uk/services/eicr)

## Book or ask a question
- [Book Now](https://www.tmbelectrics.co.uk/#chat)
