---
title: "Fridge freezer tripping the electrics | 5.0 Star · From £50"
description: "Fridge freezer tripping the electrics in Banstead: why it happens, what you can check safely, and when to book TMB Electrics to test the circuit."
canonical: "https://www.tmbelectrics.co.uk/problems/fridge-freezer-tripping-electrics"
---

# Fridge freezer tripping the electrics

> Fridge freezer tripping the electrics in Banstead: why it happens, what you can check safely, and when to book TMB Electrics to test the circuit.

A fridge freezer that trips the electrics has a fault in the appliance, its plug or cable, or on the circuit it runs from. TMB Electrics tests the circuit and fittings in Banstead to find which.

## Why does my fridge freezer keep tripping the electrics?

The trip comes from a fault in the fridge freezer, its plug and cable, or the circuit behind the socket. Each leaves a different pattern.
- **A fault inside the fridge freezer:** Current leaking to earth inside the appliance makes the RCD, the safety switch in the consumer unit, cut the power. The trip follows the fridge freezer if you plug it into another socket.
- **A damaged cable or plug:** A crushed, trapped or worn mains cable, or loose wires at the plug, can leak current. Burn or scorch marks on the plug or socket point to arcing or overheating.
- **An overloaded extension lead:** A large appliance can overload an extension lead and overheat it. A fridge freezer belongs close to a wall socket, on a UK three pin plug with a fuse.
- **Damp where the appliance stands:** A fridge freezer in a garage or outbuilding can meet damp and condensation. Moisture around the plug, socket or cable lets current leak and trips the protection.
- **A fault elsewhere on the circuit:** If the trip carries on with the fridge freezer unplugged, something else on that circuit is leaking, or the RCD or RCBO itself has become the weak point.

## What can I check safely at home?

You can unplug, look and reset. Leave the back panel, the socket faceplate and the consumer unit cover shut, because opening them is a job for a trained person.
- **Protect the food first:** Move food to a working freezer or a cool box with ice packs if you can. Keep the doors shut on anything left behind so the cold stays in.
- **Unplug and look from outside:** Pull the plug and check the plug, cable and socket for burn marks, cuts, crushing or loose wires. Make sure the cable is not trapped under the appliance.
- **Reset with nothing plugged in:** Switch the tripped breaker back on with the fridge freezer unplugged. If it trips again with nothing connected, the fault is on the circuit rather than the appliance.
- **Try a socket on another circuit:** If the breaker holds, plug the fridge freezer straight into a socket on a different circuit and see if the trip follows it. Never use an extension lead for this.

## When should I book an electrician?

Book an electrician when the trip carries on with the fridge freezer unplugged, or when any heat damage shows. Book Now to arrange the testing.
- **It trips with nothing plugged in:** A breaker or RCD that drops out with the fridge freezer unplugged means the circuit needs testing. Holding the RCD on or bypassing it leaves the fault in place.
- **The plug or socket is marked by heat:** Scorching, melting or a burning smell means unplug the appliance and leave that circuit off. Book the same day, because heat damage left in use can start a fire.
- **It trips on every socket you try:** A trip that repeats wherever the fridge freezer goes can point to the appliance, but it can also be the protective device. A test settles which before anything is replaced.
- **The trip follows only the appliance:** If the fridge freezer trips every socket and the circuit is sound, the manufacturer or a repair engineer deals with the appliance. Keep it unplugged until then.

## What happens on the visit?

The visit separates the appliance from the circuit, then looks at every fitting between the consumer unit and the plug.
- **The circuit is tested on its own:** With the fridge freezer unplugged, the circuit is isolated and tested for earth leakage. That shows whether the trip comes from the wiring side.
- **Socket, plug and cable are inspected:** The socket, the plug and the visible cable are checked for heat damage. Damaged fittings are replaced where the parts are on hand.
- **The appliance is tested if the trip follows it:** A portable appliance test checks the fridge freezer's insulation and earth. It shows whether the fault sits inside the appliance.
- **The protective device is checked and the result explained:** The RCD or RCBO on that circuit is checked and replaced if it is the weak point. You then hear what was found and what happens next with the food and the appliance.

## How is fridge freezer fault finding priced?

Fault finding is charged by the hour. The price covers the time spent isolating the circuit, testing it and inspecting the socket, plug and cable. It changes with how long the search takes and with any parts a repair needs.
- Fault finding & repair: from £80 an hour
- Replacement sockets, plugs or protective devices are added once the cause is found.
- Repairs to the fridge freezer itself sit with the manufacturer or a repair engineer, and any new circuit the testing calls for is quoted separately.

## Fridge freezer tripping questions

### Is it safe to reset the RCD and carry on?

Once, to test, yes. An RCD trip is a sign of a fault, so find the cause before relying on the circuit again. Never bypass the RCD or hold it on.

### Can I use an extension lead for my fridge freezer?

No. A large appliance can overload an extension lead and overheat it. Plug the fridge freezer straight into a wall socket close to where it stands.

### Can the fault be fixed on the same visit?

Often, when the fault is a socket, plug or protective device, because common parts such as sockets, breakers and RCDs are carried. A fault inside the fridge freezer goes to the manufacturer or a repair engineer.

### Will you repair my fridge freezer?

No. The visit finds whether the circuit or its fittings are at fault. If the trip follows the appliance, TMB Electrics tells you so and you contact the manufacturer or a repair engineer.

## Related problems
- [Burning plastic smell from electrics](https://www.tmbelectrics.co.uk/problems/burning-plastic-smell-electrical): A burning plastic smell needs the affected electrical circuit checked before it is used again.
- [Circuit breaker keeps tripping](https://www.tmbelectrics.co.uk/problems/circuit-breaker-keeps-tripping): A repeated trip usually means a circuit, fitting or connected item needs testing.
- [Circuit breaker will not reset](https://www.tmbelectrics.co.uk/problems/circuit-breaker-wont-reset): A circuit breaker that stays off needs the affected circuit checked for a fault.
- [Consumer unit is hot](https://www.tmbelectrics.co.uk/problems/consumer-unit-hot): A hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- [Consumer unit tripping with nothing plugged in](https://www.tmbelectrics.co.uk/problems/consumer-unit-tripping-nothing-plugged-in): A trip with nothing plugged in usually needs the fixed circuit traced and tested.
- [Cooker tripping the electrics](https://www.tmbelectrics.co.uk/problems/cooker-tripping-electrics): A cooker trip can come from its circuit, connection or the appliance itself.

## Sources
- [Electrical Safety First: fridges and freezers](https://www.electricalsafetyfirst.org.uk/guidance/product-safety/fridge-freezers/)
- [Electrical Safety First: your questions answered](https://www.electricalsafetyfirst.org.uk/safety-advice/your-questions-answered/)
- [HSE: work using electrically powered equipment](https://www.hse.gov.uk/electricity/electricequip.htm)

Updated 2026-11-20.

[Electrical fault finding](https://www.tmbelectrics.co.uk/services/electrical-fault-finding)

## Book or ask a question
- [Book Now](https://www.tmbelectrics.co.uk/#chat)
