---
title: "Fuse keeps blowing at home | 5.0 Star · From £50 | TMB Electrics"
description: "Fuse keeps blowing in Banstead? TMB Electrics traces the circuit, checks safe causes and explains when electrical fault finding is needed."
canonical: "https://www.tmbelectrics.co.uk/problems/fuse-keeps-blowing"
---

# Fuse keeps blowing at home

> Fuse keeps blowing in Banstead? TMB Electrics traces the circuit, checks safe causes and explains when electrical fault finding is needed.

A fuse that keeps blowing points to an overloaded circuit, a faulty appliance or a fault in the fixed wiring. TMB Electrics traces the cause and tests the affected circuit in Banstead.

## Why does a fuse keep blowing?

A fuse or circuit breaker cuts power when it detects too much current or a fault. The reason may be a connected item, too much demand on one circuit or damage in the installation.
- **A plugged in item has developed a fault:** A kettle, charger, extension lead or other plugged in item can cause a fuse or circuit breaker to operate. The fault may be inside the item even when its plug and casing look normal.
- **Too much is running from one circuit:** Several high demand appliances on one circuit can draw more current than it is designed to carry. The protective device cuts power instead of allowing the cable to overheat.
- **A socket, switch or light fitting is damaged:** A loose connection, damaged accessory or failed light fitting can create a fault on the circuit. Scorching, unusual warmth or a burning smell need the affected circuit left unused.
- **A cable or fixed connection has a fault:** Damage to a cable or a connection can make the fuse or circuit breaker operate. Testing identifies the affected section without guessing from the symptom alone.

## What can I check safely when a fuse keeps blowing?

You can note the pattern and unplug items without opening appliances, removing fittings or touching mains wiring. Leave the consumer unit cover closed.
- **Note what loses power:** Check whether the loss affects sockets, lights or both. Note the rooms and equipment without power, and what was running when the fuse or circuit breaker operated.
- **Unplug plugged in items:** Unplug appliances, chargers and extension leads from the affected sockets. Leave any item with a damaged plug, heat marks or a burning smell disconnected.
- **Look for visible heat damage:** Do not use a socket, switch, plug or light fitting with smoke, scorching, cracking, unusual warmth or a burning smell. Leave the affected circuit off if it is already off.

## When should I book fault finding for a blown fuse?

Book electrical fault finding when the protective device operates again, power stays off or any electrical fitting shows signs of overheating.
- **The fuse or breaker operates again:** A repeat trip after plugged in items are removed needs testing. Repeated resetting can leave a fault connected to the installation.
- **Power remains off:** Sockets or lights that remain without power need the circuit traced. The fault may be at an accessory, a cable, a fixed connection or a connected item.
- **There is heat, smoke or scorching:** A burning smell, smoke, scorch marks or a hot fitting needs urgent attention. Stop using the affected circuit.

## What happens when a fuse keeps blowing?

The visit starts with the affected circuit and reported symptoms, then moves through tests until the cause is identified.
- **The affected circuit is identified:** The consumer unit, affected rooms and connected equipment are checked to establish which circuit and protective device are involved.
- **The circuit is tested:** Testing narrows the fault through the circuit, sockets, switches, lights and fixed connections until the cause is identified.
- **The fault is explained:** The failed item, fitting, cable or connection is explained once testing identifies it. Any repair beyond the investigation changes the price when the work needed is known.

## What does fuse fault finding cover?

The price covers time spent identifying why the fuse or circuit breaker operates and tracing the affected circuit. The price changes when testing finds a failed accessory, damaged cable, connected item, replacement part or repair beyond the diagnostic work.
- Fault finding & repair: from £80 an hour
- Testing covers the affected circuit and the fittings connected to the repeated trip.
- Parts and repair work change the price after the cause is known.
- A fault inside a plugged in appliance may need separate repair or replacement.

## Fuse keeps blowing questions

### Why does my fuse keep blowing when I plug something in?

The item, its plug or its lead may have a fault, or the circuit may already be carrying too much demand. Unplug the item and leave it disconnected. Testing can establish whether the problem is in the fixed installation or the connected item.

### Can too many appliances blow a fuse?

Yes. Several appliances drawing power on the same circuit can exceed what that circuit is designed to carry. The fuse or circuit breaker operates to protect the cable. Reducing the number of items may stop an overload, but a repeat trip still needs checking.

### Should I keep replacing a blown fuse or resetting the breaker?

No. Do not keep replacing a fuse or resetting a circuit breaker that operates again. Leave the affected circuit unused, unplug connected items and book fault finding when the cause is not clear.

## Related problems
- [Burning plastic smell from electrics](https://www.tmbelectrics.co.uk/problems/burning-plastic-smell-electrical): A burning plastic smell needs the affected electrical circuit checked before it is used again.
- [Circuit breaker keeps tripping](https://www.tmbelectrics.co.uk/problems/circuit-breaker-keeps-tripping): A repeated trip usually means a circuit, fitting or connected item needs testing.
- [Circuit breaker will not reset](https://www.tmbelectrics.co.uk/problems/circuit-breaker-wont-reset): A circuit breaker that stays off needs the affected circuit checked for a fault.
- [Consumer unit is hot](https://www.tmbelectrics.co.uk/problems/consumer-unit-hot): A hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- [Consumer unit tripping with nothing plugged in](https://www.tmbelectrics.co.uk/problems/consumer-unit-tripping-nothing-plugged-in): A trip with nothing plugged in usually needs the fixed circuit traced and tested.
- [Cooker tripping the electrics](https://www.tmbelectrics.co.uk/problems/cooker-tripping-electrics): A cooker trip can come from its circuit, connection or the appliance itself.

## Sources
- [Electrical Safety First: Plugs and fuses](https://www.electricalsafetyfirst.org.uk/safety-advice/home-and-people/house-maintenance/plugs-and-fuses/)
- [Electrical Safety First: Ratings of electrical appliances](https://www.electricalsafetyfirst.org.uk/safety-advice/home-and-people/house-maintenance/ratings-of-electrical-appliances/)
- [Electrical Safety First: Overloading sockets](https://www.electricalsafetyfirst.org.uk/safety-advice/home-and-people/house-maintenance/overloading-sockets/)

Updated 2026-11-19.

[Electrical fault finding](https://www.tmbelectrics.co.uk/services/electrical-fault-finding)

## Book or ask a question
- [Book Now](https://www.tmbelectrics.co.uk/#chat)
