---
title: "Immersion heater not working | 5.0 Star · From £50 | TMB Electrics"
description: "Immersion heater not working in Banstead? Learn the common electrical causes, safe checks, when to book and what happens during testing."
canonical: "https://www.tmbelectrics.co.uk/problems/immersion-heater-not-working"
---

# Immersion heater not working

> Immersion heater not working in Banstead? Learn the common electrical causes, safe checks, when to book and what happens during testing.

TMB Electrics tests an immersion heater in Banstead to identify whether the element, thermostat, switch or electrical supply has stopped the cylinder heating.

## Why is my immersion heater not heating water?

An immersion heater stops heating when its element, thermostat, switch or electrical supply has developed a fault.
- **The heating element has failed:** The element is the part inside the cylinder that heats the water. A failed element can leave the cylinder cold even when its controls appear to be on.
- **The thermostat has stopped switching:** The thermostat controls the water temperature and switches the element on and off. A fault here can prevent the element receiving power or stop heating too soon.
- **The isolator or switch has a fault:** The isolator is the switch that disconnects power to the immersion heater. A damaged switch or connection can stop electricity reaching the cylinder.
- **The electrical supply has tripped:** A circuit breaker or RCD can switch off when it detects an electrical fault. The immersion heater then cannot heat until the affected circuit has been checked.

## What can I check safely before booking?

You can check the controls and note what has changed without removing covers, opening the cylinder or touching electrical wiring.
- **Check the timer setting:** Check whether the hot water timer is set to heat at the time you expect. Note whether the cylinder has stopped heating at every programmed period or only at one.
- **Check the immersion switch:** Look at the immersion switch without removing its cover. Do not use it if it has scorch marks, cracking, smoke, unusual warmth or a burning smell.
- **Note what happens at the consumer unit:** Note whether a breaker or RCD has switched off and whether it stays on. Do not keep resetting a protective device that switches off again.

## When should I book immersion heater repair?

Book immersion heater repair when the cylinder remains cold, its circuit will not stay on, or the switch shows signs of damage.
- **The water stays cold:** Cold water after the timer should have heated can mean the element, thermostat, switch or supply needs testing.
- **The circuit switches off again:** A breaker or RCD that switches off again when the immersion is used needs investigation. Leave the affected circuit off where possible.
- **The switch looks damaged:** Scorching, cracking, smoke, a burning smell or heat at the switch needs the immersion left unused until it has been checked.

## What happens during an immersion heater repair visit?

The visit starts by testing the electrical supply at the cylinder, then identifies the failed part before any replacement work begins.
- **The supply is isolated and tested:** Power to the immersion heater is isolated before the element, thermostat, isolator and supply at the cylinder are tested.
- **The failed part is identified:** Testing shows whether the fault is in the element, thermostat, switch or supply. The required repair is explained before a replacement part is fitted.
- **The repair is checked:** After the electrical work, the immersion supply and repaired part are tested to confirm the cylinder can heat safely.

## What does immersion heater repair cover?

The price covers electrical testing at the cylinder and the labour needed to repair the identified fault. It changes with the failed part, the time needed for the repair, and whether the cylinder must be drained before an element or seal is replaced.
- Fault finding & repair: from £80 an hour
- Testing covers the immersion element, thermostat, isolator and electrical supply at the cylinder.
- Replacement elements, thermostats, switches and seals change the total when they are needed.
- Written hours and fitted parts show what the repair involved.

## Immersion heater repair questions

### Can an immersion heater be repaired?

Yes, when testing identifies a fault in the element, thermostat, switch or electrical supply. The failed electrical part is identified before a replacement is fitted.

### Why is my immersion heater tripping the electrics?

A fault in the element, thermostat, switch or supply can cause a breaker or RCD to switch off. Leave the circuit unused if it switches off again, then arrange testing.

### Will the water be turned off during the repair?

The cylinder may need draining when an element or seal has to be removed. The work begins by testing the electrical parts at the cylinder to establish what is required.

### What should I tell the electrician before the visit?

Say whether the water is always cold or only cold at certain times. Include the timer setting, any tripping at the consumer unit, and visible damage or heat at the immersion switch.

## Related problems
- [Burning plastic smell from electrics](https://www.tmbelectrics.co.uk/problems/burning-plastic-smell-electrical): A burning plastic smell needs the affected electrical circuit checked before it is used again.
- [Circuit breaker keeps tripping](https://www.tmbelectrics.co.uk/problems/circuit-breaker-keeps-tripping): A repeated trip usually means a circuit, fitting or connected item needs testing.
- [Circuit breaker will not reset](https://www.tmbelectrics.co.uk/problems/circuit-breaker-wont-reset): A circuit breaker that stays off needs the affected circuit checked for a fault.
- [Consumer unit is hot](https://www.tmbelectrics.co.uk/problems/consumer-unit-hot): A hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- [Consumer unit tripping with nothing plugged in](https://www.tmbelectrics.co.uk/problems/consumer-unit-tripping-nothing-plugged-in): A trip with nothing plugged in usually needs the fixed circuit traced and tested.
- [Cooker tripping the electrics](https://www.tmbelectrics.co.uk/problems/cooker-tripping-electrics): A cooker trip can come from its circuit, connection or the appliance itself.

## Sources
- [Electrical Safety First: Safety Guidance](https://www.electricalsafetyfirst.org.uk/guidance/)
- [BS 7671: IET Wiring Regulations](https://electrical.theiet.org/bs-7671/)

Updated 2026-11-19.

[Electrical fault finding](https://www.tmbelectrics.co.uk/services/electrical-fault-finding)

## Book or ask a question
- [Book Now](https://www.tmbelectrics.co.uk/#chat)
