---
title: "Light bulbs keep blowing | 5.0 Star · From £50 | TMB Electrics"
description: "Light bulbs keep blowing in Banstead? See what causes repeat bulb failure, what to check safely and when to book TMB Electrics for fault finding."
canonical: "https://www.tmbelectrics.co.uk/problems/light-bulbs-keep-blowing"
---

# Light bulbs keep blowing

> Light bulbs keep blowing in Banstead? See what causes repeat bulb failure, what to check safely and when to book TMB Electrics for fault finding.

Light bulbs keep blowing when the lamp does not suit the fitting, the dimmer or the heat around it. TMB Electrics tests the fitting and circuit in Banstead to find which one it is.

## Why do my light bulbs keep blowing?

The pattern shows where to look. One fitting points to that fitting, one room points to its circuit, and every room points to something shared by the whole house.
- **A lamp stronger than the fitting allows:** Every fitting carries a maximum wattage marking. A lamp above it runs hot, which shortens the bulb's life and cooks the lampholder, the socket the bulb pushes into.
- **The wrong lamp type in a downlight:** Some downlights take only aluminium reflector lamps. A dichroic lamp, which throws a cool beam from a thin glass reflector, sends its heat backwards into the fitting and fails early.
- **An LED lamp on a dimmer:** An LED lamp not marked as dimmable can flicker, buzz and die early on a dimmer. Even a dimmable one can fail when the dimmer is old or built for a different load.
- **Heat trapped above the ceiling:** Downlights covered by loft insulation cannot shed their heat. The lamp and the fitting overheat together unless the fitting is rated to sit under insulation.
- **A damaged lampholder:** A holder that has scorched, corroded or discoloured makes poor contact. Each new bulb then overheats at that contact and fails the same way as the last one.

## What can I check safely at home?

These checks need no tools, no covers off and no contact with wiring. Switch the light off and let the bulb cool before you start.
- **Read the markings:** Find the maximum wattage and lamp type printed on the fitting, then compare them with the bulb packaging. Fit only a lamp that matches both.
- **Check the bulb suits the dimmer:** If the light is on a dimmer, look for a statement on the packaging that the bulb can be dimmed. Leave the dimmer plate on and do not open it.
- **Look at the holder and ceiling:** Look for brown marks, melting or a burnt smell around the holder and the ceiling beside it. If you see any, leave the fitting off and do not fit another bulb.
- **Note the pattern:** Write down whether one fitting, one room or every room is affected, and how long each bulb lasted. Photos of the fitting and any dimmer help the booking.

## When should I book an electrician?

Book when the bulbs keep failing after you have matched the markings, or as soon as any fitting shows signs of heat.
- **Heat marks on the holder or ceiling:** Scorching, curled labels or a melted holder mean heat has damaged the fitting. Book the same day if there is a burning smell.
- **Correct bulbs still fail:** A bulb of the right type and wattage that still fails points to the fitting or its circuit, and that needs testing.
- **Failures began after new work:** Bulbs that started failing once a dimmer or new fittings went in suggest a mismatch that testing can pin down.
- **Downlights sit under insulation:** Recessed fittings buried in loft insulation need checking for a fire rating, however long the bulbs last.

## What happens on the visit?

The visit starts with what has been failing and ends with the cause explained in plain words.
- **Symptoms first:** Which fittings fail, how often and since when. Photos of the ceiling, the fitting and any dimmer give the visit a head start.
- **Inspect and test:** The circuit is isolated, then the lampholder, fitting, dimmer and connections are inspected and tested until the cause is pinned to one place.
- **Fix or quote:** Simple repairs are made on the spot with parts carried. Bigger work gets a written price before it starts.

## How is fault finding priced?

Fault finding is charged by the hour for the diagnostic visit, which covers testing the fitting, any dimmer and the circuit until the cause is found. The repair is priced once the cause is known, so the price changes with what the testing finds.
- Fault finding & repair: from £80 an hour
- Replacement lampholders, fittings and other parts are quoted separately once the fault is found.
- Work the testing reveals, such as a new lighting circuit, is priced on its own.

## Light bulbs keep blowing questions

### Why do the bulbs in one light keep blowing?

Check that fitting first. A bulb above the marked wattage, the wrong lamp type or a heat damaged lampholder can each kill bulbs one after another. If every marking matches, the fitting needs testing.

### Can any LED bulb go in my downlight?

No. The lamp has to suit the fitting and its driver, the small box that powers it, and must not exceed the rating. Compare the packaging with the markings on the fitting.

### Can a dimmer switch make bulbs blow?

Yes, if the bulb is not marked as dimmable or the dimmer does not suit LED lamps. The packaging states whether a lamp can be dimmed.

### Is it safe to keep replacing the bulb?

Only while the holder is clean and undamaged. If it is scorched, corroded or discoloured, do not fit another bulb, and book fault finding with TMB Electrics.

### Can the fault be fixed on the same visit?

Simple repairs are often done on the visit, because TMB Electrics carries common parts. Anything bigger is priced in writing before work begins.

## Related problems
- [Burning plastic smell from electrics](https://www.tmbelectrics.co.uk/problems/burning-plastic-smell-electrical): A burning plastic smell needs the affected electrical circuit checked before it is used again.
- [Circuit breaker keeps tripping](https://www.tmbelectrics.co.uk/problems/circuit-breaker-keeps-tripping): A repeated trip usually means a circuit, fitting or connected item needs testing.
- [Circuit breaker will not reset](https://www.tmbelectrics.co.uk/problems/circuit-breaker-wont-reset): A circuit breaker that stays off needs the affected circuit checked for a fault.
- [Consumer unit is hot](https://www.tmbelectrics.co.uk/problems/consumer-unit-hot): A hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- [Consumer unit tripping with nothing plugged in](https://www.tmbelectrics.co.uk/problems/consumer-unit-tripping-nothing-plugged-in): A trip with nothing plugged in usually needs the fixed circuit traced and tested.
- [Cooker tripping the electrics](https://www.tmbelectrics.co.uk/problems/cooker-tripping-electrics): A cooker trip can come from its circuit, connection or the appliance itself.

## Sources
- [Electrical Safety First: downlights](https://www.electricalsafetyfirst.org.uk/guidance/safety-around-the-home/downlights/)
- [Electrical Safety First: safe installation of retrofit LED lamps (Best Practice Guide 9)](https://www.electricalsafetyfirst.org.uk/media/pqkn2dgz/best-practice-guide-9.pdf)

Updated 2026-11-20.

[Electrical fault finding](https://www.tmbelectrics.co.uk/services/electrical-fault-finding)

## Book or ask a question
- [Book Now](https://www.tmbelectrics.co.uk/#chat)
