---
title: "Lighting circuit keeps tripping | 5.0 Star · From £50 | TMB Electrics"
description: "Lighting circuit tripping in Banstead needs safe fault finding to identify failed fittings, switches, cables or connected equipment. · Call 07460 070551"
canonical: "https://www.tmbelectrics.co.uk/problems/lighting-circuit-tripping"
---

# Lighting circuit keeps tripping

> Lighting circuit tripping in Banstead needs safe fault finding to identify failed fittings, switches, cables or connected equipment. · Call 07460 070551

A lighting circuit that keeps tripping needs testing before it is used again. TMB Electrics traces the affected lighting circuit in Banstead and identifies the fault causing the trip.

## Why does a lighting circuit keep tripping?

A lighting circuit can trip when a fitting, switch, cable or connected control develops a fault. The protective device turns the circuit off when it detects that fault.
- **A light fitting has failed:** A damaged lamp holder, ceiling fitting or downlight can cause the lighting circuit to trip. Heat damage around a fitting needs testing before the circuit is switched back on.
- **A switch or dimmer has a fault:** A worn switch or dimmer can develop a fault when it operates the light. Testing separates a failed control from a fault elsewhere on the lighting circuit.
- **A connection has become loose:** A loose connection can overheat or interrupt the circuit. The fault may be at a light fitting, switch or another connection on the lighting cable.
- **A cable has been damaged:** Damage to a lighting cable can trip the breaker or RCD, which is a safety switch that turns power off when it detects a fault. Testing identifies the affected section.

## What can I check safely before booking?

You can check the pattern of the fault without opening fittings, removing covers or touching mains wiring. Leave anything damaged or hot alone.
- **Check which lights are affected:** Note whether one light, one room or several rooms lose power. Check whether sockets still work in the same rooms.
- **Try a suitable replacement lamp:** Switch the light off before fitting a known working lamp of the correct type. Do not force a lamp into a damaged holder.
- **Look for visible heat damage:** Do not use a switch or light fitting with scorch marks, cracking, smoke, a burning smell or unusual warmth.

## When should I Book Now?

Book electrical fault finding when the lighting circuit trips again, lights remain off after a lamp change, or any fitting shows damage.
- **The breaker will not stay on:** A breaker or RCD that trips again needs testing. Leave the lighting circuit off rather than repeatedly switching it back on.
- **Several lights have failed:** Several failed lights can point to a shared connection or cable fault. Testing finds where power stops on the circuit.
- **A fitting smells hot or looks burnt:** A burning smell, smoke, scorching or a hot fitting needs urgent attention. Stop using the affected lighting circuit.

## What happens when a lighting circuit trips?

The visit starts with the consumer unit and the lights that trip the circuit. Testing then narrows the fault to the affected part.
- **The lighting circuit is identified:** The consumer unit, switches and affected lights are checked to establish which protective device supplies the circuit.
- **The circuit is tested in sections:** Testing narrows the fault through the lighting cable, switches and fittings until the failed part or section is identified.
- **The fault is explained:** The cause is explained once testing identifies it. Any repair beyond the investigation is priced after the required work is known.

## What does lighting fault finding cover?

The price covers time spent investigating the lighting circuit and identifying why it trips. The price changes when testing finds a failed switch, fitting, cable connection or repair that needs replacement parts.
- Fault finding & repair: from £80 an hour
- Testing covers the affected lighting circuit, switches and fittings linked to the trip.
- Replacement parts and repair work are priced once the cause is known.

## Lighting circuit tripping questions

### Why does my lighting circuit trip when I switch a light on?

The switch, light fitting, lamp holder or wiring connection may have a fault. Testing identifies whether the fault occurs at that light or elsewhere on the lighting circuit.

### Can a faulty light fitting trip the whole lighting circuit?

Yes. A fault in one fitting can trip the protective device that supplies the lighting circuit. The other lights on that circuit may then stop working too.

### Should I keep resetting the lighting breaker?

No. Leave the lighting circuit off if it trips again. Repeated resetting can leave a fault connected to the installation.

### Can a dimmer switch make lights trip?

Yes. A dimmer can develop a fault or be unsuitable for the lamps connected to it. Testing checks the dimmer, lamps and lighting circuit before repair work is identified.

## Related problems
- [Burning plastic smell from electrics](https://www.tmbelectrics.co.uk/problems/burning-plastic-smell-electrical): A burning plastic smell needs the affected electrical circuit checked before it is used again.
- [Circuit breaker keeps tripping](https://www.tmbelectrics.co.uk/problems/circuit-breaker-keeps-tripping): A repeated trip usually means a circuit, fitting or connected item needs testing.
- [Circuit breaker will not reset](https://www.tmbelectrics.co.uk/problems/circuit-breaker-wont-reset): A circuit breaker that stays off needs the affected circuit checked for a fault.
- [Consumer unit is hot](https://www.tmbelectrics.co.uk/problems/consumer-unit-hot): A hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- [Consumer unit tripping with nothing plugged in](https://www.tmbelectrics.co.uk/problems/consumer-unit-tripping-nothing-plugged-in): A trip with nothing plugged in usually needs the fixed circuit traced and tested.
- [Cooker tripping the electrics](https://www.tmbelectrics.co.uk/problems/cooker-tripping-electrics): A cooker trip can come from its circuit, connection or the appliance itself.

## Sources
- [Electrical Safety First: Safety Guidance](https://www.electricalsafetyfirst.org.uk/guidance/)
- [IET: BS 7671 Guidance Publications](https://electrical.theiet.org/guidance-and-codes-of-practice/publications-by-category/bs-7671-and-guidance/)

Updated 2026-11-19.

[Electrical fault finding](https://www.tmbelectrics.co.uk/services/electrical-fault-finding)

## Book or ask a question
- [Book Now](https://www.tmbelectrics.co.uk/#chat)
