---
title: "Lights dim when an appliance turns on | 5.0 Star · From £50"
description: "Lights dimming in Banstead when an appliance starts can point to a loose connection, overloaded circuit or appliance fault. TMB Electrics investigates."
canonical: "https://www.tmbelectrics.co.uk/problems/lights-dim-when-appliance-turns-on"
---

# Lights dim when an appliance turns on

> Lights dimming in Banstead when an appliance starts can point to a loose connection, overloaded circuit or appliance fault. TMB Electrics investigates.

TMB Electrics finds why lights dim when an appliance starts, testing the circuit and connections to identify whether the problem is the appliance or fixed wiring.

## Why do lights dim when an appliance turns on?

Lights can dim briefly when a high load appliance starts, but repeated or marked dimming can point to a loose connection, a circuit problem or an appliance fault.
- **A high load appliance starts:** Kettles, washing machines and similar appliances draw more power as they begin to heat or run. A brief small dip can happen when that load starts.
- **A loose neutral connection:** A neutral is the conductor that completes the electrical circuit. A loose neutral can make lights dim or brighten when another appliance changes the load.
- **A connection is overheating:** A loose terminal at a socket, switch, light fitting or consumer unit can create resistance and heat. That can affect the voltage reaching lights on the circuit.
- **The appliance has a fault:** A fault inside an appliance can affect the circuit when it starts. Testing separates a problem in the appliance from a fault in the fixed installation.

## What can I check safely when lights dim?

You can note the pattern and check plug in items without opening an appliance, removing a fitting or touching mains wiring.
- **Note which appliance causes it:** Write down whether the lights dim with one appliance or several. Note which lights dim and whether the effect happens every time the appliance starts.
- **Try another socket for a plug in item:** Move a plug in appliance to another suitable socket only if its plug, cable and casing are undamaged. Do not use extension leads to reach another room.
- **Look for heat damage:** Do not use a socket, plug, switch or light fitting with scorch marks, cracking, smoke, a burning smell or unusual warmth.

## When should I book fault finding for dimming lights?

Book Now when lights dim sharply, brighten as well as dim, affect more than one room, or any electrical fitting shows signs of heat damage.
- **The lights brighten and dim:** Lights that become brighter as another appliance runs can indicate a loose neutral connection. The affected circuit needs testing before continued use.
- **Dimming affects several rooms:** Dimming across more than one room can involve a shared circuit, a connection or the consumer unit. Testing identifies what those lights have in common.
- **There is a smell, heat or scorching:** A burning smell, smoke, scorched marks or a hot electrical fitting needs immediate attention. Stop using the affected circuit where it can be left off safely.

## What happens when lights dim during an appliance start?

The visit checks the reported appliance and affected lights first, then tests the circuit until the cause is identified.
- **The pattern is checked:** The appliance, affected lights and consumer unit are checked to establish which circuit is involved and what happens when the load starts.
- **The circuit is tested:** Testing checks the circuit connections, sockets, switches and light fittings to narrow the fault to a connection, cable, fitting or connected appliance.
- **The cause is explained:** The fault and any repair needed are explained once testing identifies the cause. Work beyond the investigation is priced when the repair is known.

## What does fault finding for dimming lights cover?

The price covers the investigation of the lights, the reported appliance and the affected circuit. It changes when testing finds a failed accessory, damaged cable, loose connection, appliance fault or repair that needs replacement parts.
- Fault finding & repair: from £80 an hour
- Testing covers the affected circuit, its lights and the appliance linked to the dimming.
- Parts and repair work are priced after testing identifies the cause.
- An appliance fault may need separate appliance repair or replacement.

## Lights dimming questions

### Is it normal for lights to dim when a kettle boils?

A small brief dip as a kettle starts can happen because it draws a high load. Repeated, severe or changing dimming needs investigation, especially when lights brighten as well as dim.

### Can a loose connection make lights dim?

Yes. A loose connection can restrict the electrical supply and may heat up under load. Testing identifies whether the problem is at a socket, light fitting, switch, consumer unit or cable connection.

### Can one appliance make all my lights dim?

Yes. An appliance fault can affect the circuit when it starts, although dimming across several rooms can also point to a fixed wiring problem. Leave any damaged appliance unplugged until it has been checked.

### Should I stop using an appliance if lights dim?

Stop using it if the dimming is severe, lights also brighten, or there is heat, damage, smoke or a burning smell. Note the appliance and the rooms affected so the circuit can be tested.

## Related problems
- [Burning plastic smell from electrics](https://www.tmbelectrics.co.uk/problems/burning-plastic-smell-electrical): A burning plastic smell needs the affected electrical circuit checked before it is used again.
- [Circuit breaker keeps tripping](https://www.tmbelectrics.co.uk/problems/circuit-breaker-keeps-tripping): A repeated trip usually means a circuit, fitting or connected item needs testing.
- [Circuit breaker will not reset](https://www.tmbelectrics.co.uk/problems/circuit-breaker-wont-reset): A circuit breaker that stays off needs the affected circuit checked for a fault.
- [Consumer unit is hot](https://www.tmbelectrics.co.uk/problems/consumer-unit-hot): A hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- [Consumer unit tripping with nothing plugged in](https://www.tmbelectrics.co.uk/problems/consumer-unit-tripping-nothing-plugged-in): A trip with nothing plugged in usually needs the fixed circuit traced and tested.
- [Cooker tripping the electrics](https://www.tmbelectrics.co.uk/problems/cooker-tripping-electrics): A cooker trip can come from its circuit, connection or the appliance itself.

## Sources
- [BS 7671: IET Wiring Regulations](https://electrical.theiet.org/bs-7671/)
- [Electrical Safety First: Safety Guidance](https://www.electricalsafetyfirst.org.uk/guidance/)
- [Energy Networks Association: Power Cut Information](https://www.energynetworks.org/operating-the-networks/power-cuts)

Updated 2026-11-19.

[Electrical fault finding](https://www.tmbelectrics.co.uk/services/electrical-fault-finding)

## Book or ask a question
- [Book Now](https://www.tmbelectrics.co.uk/#chat)
