---
title: "Lights flickering after a new fitting | 5.0 Star · From £50"
description: "New light flickering in Banstead after fitting? TMB Electrics checks the lamp, fitting and lighting circuit to identify the cause. · Call 07460 070551"
canonical: "https://www.tmbelectrics.co.uk/problems/lights-flickering-after-new-fitting"
---

# Lights flickering after a new fitting

> New light flickering in Banstead after fitting? TMB Electrics checks the lamp, fitting and lighting circuit to identify the cause. · Call 07460 070551

A new light that flickers needs the fitting, lamp and lighting circuit checked. TMB Electrics tests the affected lighting circuit in Banstead and identifies what needs attention.

## Why does a new light fitting flicker?

A new fitting can flicker when the lamp does not suit the control, a connection needs checking, or the lighting circuit has a fault.
- **The lamp and dimmer do not suit each other:** Some LED lamps need a dimmer made for LED lighting. A lamp can flicker, buzz or fail to dim smoothly when the existing dimmer does not match its load.
- **The new lamp is faulty:** A faulty lamp can flicker even when the fitting and circuit are sound. A known working lamp of the correct type helps show whether the problem follows the lamp.
- **A connection in the fitting needs checking:** A loose terminal can interrupt the supply to a new fitting. The fitting and its connections need isolation and testing before any electrical work is done.
- **The lighting circuit has a fault:** A fault at a switch, another fitting or a cable connection can affect a new light. Testing traces the lighting circuit instead of treating the new fitting as the cause.

## What can I check safely before booking?

You can check the lamp and note the pattern without opening the fitting, removing covers or touching any mains wiring.
- **Try a known working lamp:** Switch the light off and fit a known working lamp of the correct type if the lamp can be changed normally. Do not force a lamp into a damaged holder.
- **Check whether a dimmer controls the light:** Note whether the fitting flickers only when a dimmer is used or at a certain dimmer setting. This helps show whether the lamp and dimmer need checking together.
- **See what else is affected:** Check whether one fitting, one room or several lights flicker. Note whether sockets remain on and whether any switch, fitting or lamp feels unusually warm.
- **Look for visible heat damage:** Do not use a fitting or switch with smoke, scorch marks, cracking or a burning smell. Leave the light off and keep clear of the fitting.

## When should I book electrical fault finding?

Book Now when changing the lamp does not stop the flicker, the fitting shows damage, or other lights on the circuit are affected.
- **The new light still flickers with another lamp:** A replacement lamp that flickers in the same fitting can point to the fitting, dimmer, switch or lighting circuit. Testing identifies which part needs attention.
- **Several lights flicker together:** Flickering across more than one fitting can point to a shared lighting circuit or connection. The affected circuit needs checking before it is used normally.
- **The fitting or switch shows heat damage:** Smoke, scorching, a burning smell or unusual warmth at a light fitting or switch needs urgent attention. Stop using the affected circuit.

## What happens when a new light flickers?

The visit starts with the new fitting and then checks the lighting circuit until the cause is identified.
- **The fitting and controls are checked:** The lamp type, fitting, switch and dimmer are checked against the reported flicker. The lighting circuit is isolated before terminals are examined.
- **The lighting circuit is tested:** Testing checks the fitting and the circuit that supplies it. This separates a fault in the new fitting from a fault elsewhere on the lighting circuit.
- **The work needed is explained:** The cause is explained once testing identifies it. Any repair or replacement work is priced after the fault and required parts are known.

## What does flickering light fault finding cover?

The price covers the time needed to check the new fitting, its lamp, switch or dimmer, and the affected lighting circuit. The price changes when testing identifies a failed fitting, damaged connection, replacement part or repair beyond the investigation.
- Fault finding & repair: from £80 an hour
- Testing covers the new fitting and the lighting circuit linked to the flicker.
- Replacement lamps, fittings, dimmers and repair work are priced once the cause is known.
- A fault in another part of the lighting circuit can need further repair work.

## New light flickering questions

### Why does my new LED light flicker on the old dimmer?

The dimmer may not suit the LED lamp or the load on the lighting circuit. TMB Electrics checks the lamp, dimmer and fitting before deciding whether the fault is at the control or elsewhere on the circuit.

### Can a loose light fitting connection cause flickering?

Yes. A loose connection can interrupt the supply and create heat at the terminal. The lighting circuit is isolated before the fitting and its connections are checked.

### Should I keep using a new light that flickers?

Do not use the fitting if there is a burning smell, smoke, scorching, cracking or unusual warmth. If the flicker continues after a suitable lamp is fitted, book electrical fault finding.

### Can one new light fitting make other lights flicker?

Several lights can be affected when they share a lighting circuit or a connection. Testing checks the reported fitting and the shared circuit to identify where the fault sits.

## Related problems
- [Burning plastic smell from electrics](https://www.tmbelectrics.co.uk/problems/burning-plastic-smell-electrical): A burning plastic smell needs the affected electrical circuit checked before it is used again.
- [Circuit breaker keeps tripping](https://www.tmbelectrics.co.uk/problems/circuit-breaker-keeps-tripping): A repeated trip usually means a circuit, fitting or connected item needs testing.
- [Circuit breaker will not reset](https://www.tmbelectrics.co.uk/problems/circuit-breaker-wont-reset): A circuit breaker that stays off needs the affected circuit checked for a fault.
- [Consumer unit is hot](https://www.tmbelectrics.co.uk/problems/consumer-unit-hot): A hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- [Consumer unit tripping with nothing plugged in](https://www.tmbelectrics.co.uk/problems/consumer-unit-tripping-nothing-plugged-in): A trip with nothing plugged in usually needs the fixed circuit traced and tested.
- [Cooker tripping the electrics](https://www.tmbelectrics.co.uk/problems/cooker-tripping-electrics): A cooker trip can come from its circuit, connection or the appliance itself.

## Sources
- [BS 7671: IET Wiring Regulations](https://electrical.theiet.org/bs-7671/)
- [Electrical Safety First: Safety Guidance](https://www.electricalsafetyfirst.org.uk/guidance/)
- [NICEIC: Householder Guidance](https://niceic.com/householders/)

Updated 2026-11-19.

[Electrical fault finding](https://www.tmbelectrics.co.uk/services/electrical-fault-finding)

## Book or ask a question
- [Book Now](https://www.tmbelectrics.co.uk/#chat)
