---
title: "Lights not working but sockets are fine | 5.0 Star · From £50"
description: "Lights not working but sockets are fine in Banstead? TMB Electrics tests the lighting circuit, switches and fittings to find the fault. · Call 07460 070551"
canonical: "https://www.tmbelectrics.co.uk/problems/lights-not-working-but-sockets-are"
---

# Lights not working but sockets are fine

> Lights not working but sockets are fine in Banstead? TMB Electrics tests the lighting circuit, switches and fittings to find the fault. · Call 07460 070551

Lights can fail while sockets work when the lighting circuit, switch, fitting or connection has a fault. TMB Electrics traces the lighting circuit in Banstead and identifies where power stops.

## Why do lights stop working while sockets still work?

Lights and sockets usually run on separate circuits, so a fault affecting the lighting circuit can leave sockets working normally.
- **The lighting breaker has switched off:** A circuit breaker is the switch in the consumer unit that cuts power when it detects a fault. The lighting circuit can be off while the socket circuit stays on.
- **A light fitting has failed:** A failed light fitting, lamp holder or connection can interrupt power on the lighting circuit. Damage or overheating around a fitting needs testing before it is used again.
- **A switch or dimmer has failed:** A worn switch or dimmer can stop a light from working even when the circuit remains live. Testing separates a failed control from a problem elsewhere on the circuit.
- **A connection on the circuit has failed:** A loose or damaged connection can stop power reaching one or more lights. The fault may be at a fitting, switch or cable connection.

## What can I check safely before booking?

You can check which lights have failed and remove plug in lamps without opening fittings or touching electrical wiring.
- **Check which lights are affected:** See whether one light, one room or several rooms are affected. Check whether the socket circuit still works in the same room.
- **Try a known working lamp:** If a removable lamp has failed, switch the light off and fit a known working lamp of the correct type. Do not force a lamp into a damaged holder.
- **Look for visible heat damage:** Do not use a switch or fitting with a burning smell, scorch marks, cracking, smoke or unusual warmth. Leave the light off and book an electrician.

## When should I book electrical fault finding?

Book electrical fault finding when replacing a lamp does not restore the light, more than one light has failed, or any fitting shows damage.
- **The lighting breaker will not stay on:** A breaker that switches off again needs testing. Leave it off rather than repeatedly restoring power.
- **Several lights have stopped working:** Several failed lights can mean a fault at a shared connection or on part of the lighting circuit. Testing identifies where the supply stops.
- **A switch or fitting is damaged:** A loose switch, burnt fitting or damaged ceiling rose needs investigation before the circuit is used again.

## What happens when lights fail but sockets work?

The visit starts with the lights that have failed, then follows the lighting circuit through tests until the fault is identified.
- **The lighting circuit is identified:** The consumer unit, switches and failed lights are checked to establish which circuit supplies them.
- **The circuit is tested in sections:** Testing narrows the fault through the circuit, switches and fittings until the failed part or section is found.
- **The cause is explained:** The failed part and any repair needed are explained once testing identifies the cause.

## What does lighting fault finding cover?

The price covers time spent investigating the lighting circuit and identifying why the lights have stopped working while sockets remain on. The price changes if testing finds a failed switch, light fitting, cable connection, replacement part or repair beyond the investigation.
- Fault finding & repair: from £80 an hour
- Testing covers the affected lighting circuit, switches and fittings linked to the loss of light.
- Replacement parts and repair work are priced once the cause is known.

## Lights not working but sockets are fine questions

### Why do my lights not work but my sockets do?

Lights and sockets are commonly supplied by separate circuits. A fault on the lighting circuit can leave sockets working while lights, switches or fittings have no power.

### Can a faulty light switch stop all the lights working?

A faulty switch can stop the light it controls from working. If several lights have failed, testing checks the shared lighting circuit and connections as well as each switch.

### Should I keep resetting the lighting breaker?

No, do not keep resetting a breaker that switches off again. Leave the lighting circuit off and book testing to find the cause.

## Related problems
- [Burning plastic smell from electrics](https://www.tmbelectrics.co.uk/problems/burning-plastic-smell-electrical): A burning plastic smell needs the affected electrical circuit checked before it is used again.
- [Circuit breaker keeps tripping](https://www.tmbelectrics.co.uk/problems/circuit-breaker-keeps-tripping): A repeated trip usually means a circuit, fitting or connected item needs testing.
- [Circuit breaker will not reset](https://www.tmbelectrics.co.uk/problems/circuit-breaker-wont-reset): A circuit breaker that stays off needs the affected circuit checked for a fault.
- [Consumer unit is hot](https://www.tmbelectrics.co.uk/problems/consumer-unit-hot): A hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- [Consumer unit tripping with nothing plugged in](https://www.tmbelectrics.co.uk/problems/consumer-unit-tripping-nothing-plugged-in): A trip with nothing plugged in usually needs the fixed circuit traced and tested.
- [Cooker tripping the electrics](https://www.tmbelectrics.co.uk/problems/cooker-tripping-electrics): A cooker trip can come from its circuit, connection or the appliance itself.

## Sources
- [Electrical Safety First: Safety Guidance](https://www.electricalsafetyfirst.org.uk/guidance/)
- [IET: BS 7671 Guidance Publications](https://electrical.theiet.org/guidance-and-codes-of-practice/publications-by-category/bs-7671-and-guidance/)
- [NICEIC: Householder Guidance](https://niceic.com/householders/)

Updated 2026-11-19.

[Electrical fault finding](https://www.tmbelectrics.co.uk/services/electrical-fault-finding)

## Book or ask a question
- [Book Now](https://www.tmbelectrics.co.uk/#chat)
