---
title: "Why lights pulse on and off | 5.0 Star · From £50 | TMB Electrics"
description: "Lights pulsing on and off in Banstead can point to a lamp, dimmer, fitting or circuit fault. Find out what to check and when to book. · Call 07460 070551"
canonical: "https://www.tmbelectrics.co.uk/problems/lights-pulsing-on-and-off"
---

# Why lights pulse on and off

> Lights pulsing on and off in Banstead can point to a lamp, dimmer, fitting or circuit fault. Find out what to check and when to book. · Call 07460 070551

Lights that pulse often have a fault in the fitting, control or lighting circuit. TMB Electrics traces the cause in Banstead and identifies the work needed to stop the pulsing.

## Why do lights pulse on and off?

Pulsing usually starts at the lamp, dimmer, fitting or a connection on the lighting circuit. Testing separates a single faulty fitting from a fault affecting more of the installation.
- **A lamp does not suit the dimmer:** Some LED lamps pulse when fitted to a dimmer that does not match their load. The pulsing may change when the dimmer setting moves or when the lamp warms up.
- **A dimmer or switch is failing:** A failing dimmer can interrupt the supply to a light even when the lamp is sound. A switch fault can also affect the fitting it controls.
- **A connection has become loose:** A loose connection at a fitting, switch or elsewhere on the lighting circuit can make a light pulse. Loose electrical connections can generate heat and need testing.
- **The lighting circuit has a fault:** Several pulsing lights can point to a fault shared by part of the lighting circuit. Testing finds whether the problem sits at one fitting, one control or the circuit itself.

## What can I check safely when lights pulse?

You can note the pattern and inspect visible parts without opening a fitting, removing a switch plate or touching mains wiring.
- **Check which lights pulse:** Note whether one light, one room or several rooms are affected. See whether the pulsing starts when another light or appliance is switched on.
- **Try a matching removable lamp:** With the light switched off, fit a known working removable lamp of the correct type if the holder is undamaged. Do not force a lamp into a damaged holder.
- **Look for heat damage:** Do not use a fitting or switch with scorch marks, cracking, smoke, unusual warmth or a burning smell. Leave that light switched off.

## When should I book for pulsing lights?

Book Now when a light continues to pulse after a suitable lamp is fitted, when more than one light is affected, or when there are signs of heat damage.
- **The pulsing continues with another lamp:** A light that still pulses with a suitable working lamp needs the fitting, switch and circuit tested. The cause may be outside the lamp itself.
- **More than one light is affected:** Pulsing across several lights can indicate a shared connection or circuit fault. Testing identifies which parts of the installation are involved.
- **A fitting or switch shows damage:** Scorching, smoke, a burning smell or unusual warmth needs urgent electrical attention. Keep the affected light switched off.

## What happens when lights are pulsing?

The visit starts with the affected lights and controls, then follows the lighting circuit through tests until the cause is identified.
- **The pulsing pattern is checked:** The affected lights, lamps, switches and dimmers are checked against the rooms where the problem appears. This establishes whether one fitting or several points are involved.
- **The lighting circuit is isolated and tested:** The relevant circuit is switched off for testing of the fittings and controls. Tests narrow the fault to the lamp, dimmer, switch, connection or circuit section.
- **The cause and repair are explained:** The failed part or remaining investigation is explained once testing identifies it. Repair work is priced after the required work and parts are known.

## What does pulsing light fault finding cover?

The price covers the diagnostic visit to investigate the lights, their controls and the affected lighting circuit. The price changes when testing finds a failed lamp, dimmer, switch, fitting, cable connection or repair that needs replacement parts.
- Fault finding & repair: from £80 an hour
- Testing covers the pulsing lights and the controls connected to the reported fault.
- Replacement parts and repair work are priced once the cause is known.

## Pulsing light questions

### Why do LED lights pulse on a dimmer?

An LED lamp can pulse when the dimmer does not match the lamp load. The dimmer, lamp type and fitting need checking before a replacement is chosen.

### Can one loose connection make several lights pulse?

Yes, a loose connection on a shared lighting circuit can affect more than one light. Testing identifies whether the fault is at a fitting, switch, connection or another section of the circuit.

### Should I keep using a pulsing light?

Do not use a pulsing light with heat, scorching, smoke, cracking or a burning smell. Leave the light switched off and arrange electrical fault finding.

### Can changing the lamp stop the pulsing?

A suitable working lamp can stop pulsing caused by a failed or unsuitable lamp. If the problem remains, the fitting, control and circuit need testing.

## Related problems
- [Burning plastic smell from electrics](https://www.tmbelectrics.co.uk/problems/burning-plastic-smell-electrical): A burning plastic smell needs the affected electrical circuit checked before it is used again.
- [Circuit breaker keeps tripping](https://www.tmbelectrics.co.uk/problems/circuit-breaker-keeps-tripping): A repeated trip usually means a circuit, fitting or connected item needs testing.
- [Circuit breaker will not reset](https://www.tmbelectrics.co.uk/problems/circuit-breaker-wont-reset): A circuit breaker that stays off needs the affected circuit checked for a fault.
- [Consumer unit is hot](https://www.tmbelectrics.co.uk/problems/consumer-unit-hot): A hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- [Consumer unit tripping with nothing plugged in](https://www.tmbelectrics.co.uk/problems/consumer-unit-tripping-nothing-plugged-in): A trip with nothing plugged in usually needs the fixed circuit traced and tested.
- [Cooker tripping the electrics](https://www.tmbelectrics.co.uk/problems/cooker-tripping-electrics): A cooker trip can come from its circuit, connection or the appliance itself.

## Sources
- [BS 7671: IET Wiring Regulations (18th Edition)](https://electrical.theiet.org/bs-7671/)
- [Electrical Safety First: Safety Guidance](https://www.electricalsafetyfirst.org.uk/guidance/)
- [HSE: Electrical Safety at Work](https://www.hse.gov.uk/electricity/)

Updated 2026-11-19.

[Electrical fault finding](https://www.tmbelectrics.co.uk/services/electrical-fault-finding)

## Book or ask a question
- [Book Now](https://www.tmbelectrics.co.uk/#chat)
