---
title: "Mild electric shock when touching metal | 5.0 Star · From £50"
description: "Mild electric shock when touching metal in Banstead needs electrical fault finding to identify voltage on exposed metal and make the affected circuit safe."
canonical: "https://www.tmbelectrics.co.uk/problems/mild-shock-touching-metal"
---

# Mild electric shock when touching metal

> Mild electric shock when touching metal in Banstead needs electrical fault finding to identify voltage on exposed metal and make the affected circuit safe.

A mild shock from metal can mean a fault in the electrical installation. TMB Electrics tests the affected circuit and metalwork in Banstead to find where voltage is reaching it.

## Why do I get a mild shock when touching metal?

A shock or tingling feeling can happen when exposed metal has become live or carries a voltage difference. The cause can be in fixed wiring, electrical equipment or the incoming electricity supply.
- **A fault has reached metalwork:** A damaged cable, loose connection or failed fitting can allow voltage onto metal parts that should not be live. Testing identifies whether the problem sits in a circuit, fitting or connected equipment.
- **Earthing or bonding needs checking:** Earthing and bonding connect metal parts to the electrical safety system. A fault in these connections can leave metal at a different voltage from the ground or another metal surface.
- **A connected appliance has a fault:** A faulty appliance can put voltage onto its metal casing or affect the circuit supplying it. The appliance stays disconnected while the fixed installation is checked.
- **The incoming supply has a fault:** A problem affecting the electricity network can create a voltage difference on metalwork. The local electricity network can investigate the supply when testing points outside the property.

## What can I check safely after feeling a shock from metal?

Do not touch the metal item again to test it. You can note what happened and move away from the affected area without opening equipment or touching wiring.
- **Move away from the metal item:** Stop using the metal fitting, appliance or pipe where you felt the shock. Keep other people away from it until the cause has been checked.
- **Note what you touched:** Write down the metal item, room and what electrical equipment was running. Note whether the feeling happened near a tap, appliance, radiator, socket or outdoor metalwork.
- **Look for visible damage without touching:** Look for scorch marks, damaged plugs, cracked sockets, loose fittings or water near electrical equipment. Leave anything damaged switched off and disconnected where this can be done without touching metal.

## When should I Book Now for a shock from metal?

Book electrical fault finding when you have felt a shock or tingling from any metal item. A repeat shock, burning smell, damaged fitting or shock near water needs prompt attention.
- **You felt a shock from a tap or pipe:** Metal plumbing can be connected to the electrical safety system. A shock from a tap, pipe or radiator needs the installation and bonding checked.
- **You felt a shock from an appliance:** A metal appliance casing can become live through a fault. Stop using the appliance and arrange testing of the appliance connection and affected circuit.
- **There is heat, smoke or scorching:** A burning smell, smoke, scorch mark or hot fitting means the affected circuit should not be used. Emergency call out and make safe can isolate the immediate danger.

## What happens when a mild shock from metal is investigated?

Trevor starts with the metal item and the reported shock, then tests the electrical installation in stages to identify where the voltage is coming from.
- **The affected area is made safe:** The relevant circuit is identified and isolated where needed. Trevor checks the reported metal item before testing continues.
- **The installation is tested:** Testing checks earthing, bonding, circuit protection and the affected circuit. Connected equipment is separated from the fixed installation where needed.
- **The fault is identified:** Trevor explains whether the cause is in a fitting, circuit, connected appliance or the incoming supply. A network fault is reported to the local electricity network.
- **Repair work is set out:** The work needed to repair the electrical fault is explained once the cause is known. Testing and documentation are completed where the repair requires them.

## What does fault finding for a mild shock from metal cover?

The price covers investigation of the reported shock, the affected metalwork and the electrical circuit or safety connections involved. It changes when testing finds a failed fitting, damaged cable, earthing work, appliance fault or incoming supply problem that needs further work.
- Fault finding & repair: from £80 an hour
- Testing covers the reported metal item, the relevant circuit and the electrical safety connections linked to it.
- Repair work and replacement parts are priced once testing identifies the cause.
- A fault in the incoming electricity supply is passed to the local electricity network.

## Mild shock when touching metal questions

### Is a mild electric shock from a metal tap serious?

Yes. A shock from a tap, pipe or other metal item can mean there is a voltage difference that needs checking. Stop touching the item and arrange electrical fault finding.

### Can a faulty appliance make metal parts give a shock?

Yes. A fault in an appliance can affect its metal casing or the circuit supplying it. Leave the appliance disconnected and have the appliance connection and fixed wiring checked.

### Should I switch off the electricity after feeling a shock?

Leave the affected circuit off if you can identify it without touching metalwork or opening the consumer unit cover. Do not touch the metal item again to test it. Book electrical fault finding to identify the cause.

### Can the electricity network cause a shock from metalwork?

Yes. A fault in the incoming supply can create a voltage difference on metalwork. TMB Electrics checks the installation first, then the local electricity network investigates when the fault points to its supply.

## Related problems
- [Burning plastic smell from electrics](https://www.tmbelectrics.co.uk/problems/burning-plastic-smell-electrical): A burning plastic smell needs the affected electrical circuit checked before it is used again.
- [Circuit breaker keeps tripping](https://www.tmbelectrics.co.uk/problems/circuit-breaker-keeps-tripping): A repeated trip usually means a circuit, fitting or connected item needs testing.
- [Circuit breaker will not reset](https://www.tmbelectrics.co.uk/problems/circuit-breaker-wont-reset): A circuit breaker that stays off needs the affected circuit checked for a fault.
- [Consumer unit is hot](https://www.tmbelectrics.co.uk/problems/consumer-unit-hot): A hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- [Consumer unit tripping with nothing plugged in](https://www.tmbelectrics.co.uk/problems/consumer-unit-tripping-nothing-plugged-in): A trip with nothing plugged in usually needs the fixed circuit traced and tested.
- [Cooker tripping the electrics](https://www.tmbelectrics.co.uk/problems/cooker-tripping-electrics): A cooker trip can come from its circuit, connection or the appliance itself.

## Sources
- [IET: Broken PEN](https://electrical.theiet.org/wiring-matters/years/2021/84-march-2021/broken-pen/)
- [HSE: Electrical injuries](https://www.hse.gov.uk/electricity/injuries.htm)
- [Call 105 for the local electricity network](https://www.powercut105.com/)

Updated 2026-11-19.

[Electrical fault finding](https://www.tmbelectrics.co.uk/services/electrical-fault-finding)

## Book or ask a question
- [Book Now](https://www.tmbelectrics.co.uk/#chat)
