---
title: "Old cloth or rubber wiring | 5.0 Star · From £50 | TMB Electrics"
description: "Old cloth or rubber wiring in Banstead needs testing before rewiring. TMB Electrics checks insulation, circuits and consumer unit connections."
canonical: "https://www.tmbelectrics.co.uk/problems/old-cloth-wiring"
---

# Old cloth or rubber wiring

> Old cloth or rubber wiring in Banstead needs testing before rewiring. TMB Electrics checks insulation, circuits and consumer unit connections.

Old cloth or rubber wiring can deteriorate and needs testing before House Rewiring is planned. TMB Electrics checks the installation in Banstead and identifies whether affected circuits need replacement.

## Why does old cloth or rubber wiring need attention?

Cloth and rubber insulation can become brittle as it ages. The cable may look intact in one place while the insulation has deteriorated elsewhere on the circuit.
- **Rubber insulation has hardened:** Rubber insulation can dry out and crack with age. Cracks can leave the conductor inside less protected, particularly where a cable bends or enters a fitting.
- **Cloth covering has worn away:** Cloth covered cable can fray or become damaged where it passes through a ceiling, wall or accessory. The outer covering does not show the condition of the insulation inside.
- **Heat has affected the cable:** Older cable near light fittings, heaters or overloaded connections can be affected by heat. Discolouration, brittle insulation or scorching needs electrical testing.
- **Later work has joined old and newer wiring:** A property can have newer sockets or a newer consumer unit connected to older circuits. Testing establishes which cable belongs to each circuit and whether it can remain in use.

## What can I check safely with old wiring?

You can note visible signs and record which rooms or fittings are affected. Do not open the consumer unit, remove a socket or switch, or touch any exposed wiring.
- **Look without touching:** Note any visible cloth covering, cracked rubber, scorch marks or damaged cable at an accessible fitting. Do not move, pull or handle the cable.
- **Record affected rooms and fittings:** Write down which sockets, lights or switches are on the older installation. Note any circuit that trips, flickers or has stopped working.
- **Keep damaged fittings unused:** Leave a socket, switch or light fitting unused if it has scorching, cracking, smoke, a burning smell or unusual warmth. Do not replace parts or remove covers.

## When should I book House Rewiring?

Book House Rewiring when old insulation is visible, an inspection identifies deterioration, or the installation no longer suits how the property is used.
- **Cloth or rubber cable is visible:** Visible old cable needs assessment before it is disturbed, extended or connected to new work. Testing identifies whether that circuit needs replacement.
- **The installation has mixed ages:** A newer consumer unit does not establish the condition of older circuits behind it. Testing shows whether the retained wiring is suitable for continued use.
- **There are signs of overheating:** A burning smell, smoke, scorching or unusual warmth at an electrical fitting needs the affected circuit left unused until it is checked.

## What happens during a visit for old wiring?

The visit starts by identifying the circuits and accessible parts of the installation that need assessment. TMB Electrics then tests the wiring before recommending the work needed.
- **Identify the older circuits:** The consumer unit, accessible cables and affected rooms are checked to establish which circuits contain the older wiring.
- **Test the installation:** Electrical tests check the condition of the circuit insulation and connections. The results show whether a circuit can remain or needs replacement.
- **Set out the rewire work:** The circuits requiring replacement, the rooms involved and the cable access needed are explained before House Rewiring is priced.

## What does House Rewiring cover for old wiring?

The price covers the electrical work needed after testing identifies the condition of the old circuits. It changes with the number of circuits being replaced, the rooms involved, cable access, the consumer unit arrangement and any separate electrical faults found during testing.
- Rewiring & circuit runs: from £1,800
- Testing identifies whether the work is a full rewire or replacement of selected circuits.
- New sockets, switches, lighting points and consumer unit work are included only where they are part of the written price.
- Plaster, decoration and other building work are separate unless included in the written price.

## Old cloth or rubber wiring questions

### Is cloth or rubber wiring dangerous?

Old insulation can deteriorate and may no longer protect the cable as intended. The condition of a particular circuit needs electrical testing before replacement work is planned.

### Can a newer consumer unit stay with old wiring?

A newer consumer unit and older wiring are separate parts of the installation. Testing establishes whether the older circuits can remain connected or need replacement.

### Do I need to rewire the whole house?

Not every property with older cable needs every circuit replaced. Testing identifies the condition and extent of the affected wiring before House Rewiring is priced.

## Related problems
- [Aluminium wiring in the house](https://www.tmbelectrics.co.uk/problems/aluminium-wiring): Aluminium wiring needs inspection and testing before any repair, upgrade or added circuit.
- [Burning plastic smell from electrics](https://www.tmbelectrics.co.uk/problems/burning-plastic-smell-electrical): A burning plastic smell needs the affected electrical circuit checked before it is used again.
- [Burning smell from the fuse box](https://www.tmbelectrics.co.uk/problems/burning-smell-from-fuse-box): A burning smell at the consumer unit can mean an overheating connection or protective device.
- [Buying a house with old electrics](https://www.tmbelectrics.co.uk/problems/buying-house-old-electrics): An EICR checks the fixed wiring so you know its condition before buying.
- [Circuit breaker keeps tripping](https://www.tmbelectrics.co.uk/problems/circuit-breaker-keeps-tripping): A repeated trip usually means a circuit, fitting or connected item needs testing.
- [Circuit breaker will not reset](https://www.tmbelectrics.co.uk/problems/circuit-breaker-wont-reset): A circuit breaker that stays off needs the affected circuit checked for a fault.

## Sources
- [BS 7671: IET Wiring Regulations (18th Edition)](https://electrical.theiet.org/bs-7671/)
- [Electrical Safety First: DIY Electrical Work](https://www.electricalsafetyfirst.org.uk/safety-advice/home-and-people/diy-ers/)
- [NICEIC: Householder Guidance](https://niceic.com/householders/)

Updated 2026-11-19.

[House Rewiring](https://www.tmbelectrics.co.uk/services/house-rewiring)

## Book or ask a question
- [Book Now](https://www.tmbelectrics.co.uk/#chat)
