---
title: "Panel heater not working | 5.0 Star · From £50 | TMB Electrics"
description: "Panel heater not working in Banstead? Learn safe checks, likely electrical causes and when fault finding is needed. · 5.0 Star from 39 reviews"
canonical: "https://www.tmbelectrics.co.uk/problems/panel-heater-not-working"
---

# Panel heater not working

> Panel heater not working in Banstead? Learn safe checks, likely electrical causes and when fault finding is needed. · 5.0 Star from 39 reviews

A panel heater that stays cold or trips its circuit needs testing. TMB Electrics finds whether the heater controls or fixed supply needs electrical repair.

## Why is my panel heater not working?

A panel heater can stop heating because its controls, supply or internal parts have failed. Testing separates a fault in the fixed installation from a fault inside the heater.
- **The heater settings are off:** A timer, thermostat or temperature setting can stop the heater from coming on. A thermostat is the control that switches heating on and off at the selected room temperature.
- **The circuit has switched off:** A breaker or RCD in the consumer unit can cut power when it detects a fault. An RCD is a safety switch that turns power off when electricity flows where it should not.
- **The heater has an internal fault:** A failed heating element, thermostat or internal connection can leave the heater cold even when power reaches its supply.
- **The fixed supply has a fault:** A fault at the isolator, connection or cable can stop power reaching the heater. Electrical fault finding tests the fixed supply without guessing from the symptom.

## What can I check safely before fault finding?

You can check the heater controls and visible condition without opening the heater, removing covers or touching electrical wiring.
- **Check the temperature and timer:** Set the heater above the current room temperature and check whether a timer setting is preventing it from heating.
- **Check whether other power is affected:** Note whether other sockets, lights or heaters in the room still work. This helps show whether the problem is limited to the heater or affects a wider circuit.
- **Look for visible damage:** Do not use the heater if there is a burning smell, smoke, scorching, cracking or unusual heat around its controls or supply point.

## When does a panel heater need electrical fault finding?

Electrical fault finding is needed when the heater remains cold after its settings are checked, its circuit switches off, or the fixed supply may have failed.
- **The heater stays cold:** A heater that does not warm after its controls are checked needs testing to establish whether power reaches it and whether the fixed supply is sound.
- **The circuit trips:** A breaker or RCD that switches off when the heater is used needs investigation. Leave the affected circuit off if it will not stay on.
- **There are signs of overheating:** Smoke, scorching, a burning smell or unusual heat at the heater or its supply point needs the affected circuit left unused.

## What happens when a panel heater is checked?

The visit starts with the heater and its supply, then testing establishes whether the fault sits in the fixed installation or inside the appliance.
- **The heater and circuit are identified:** The heater controls, supply point and consumer unit are checked to establish which circuit feeds the heater.
- **The fixed supply is tested:** Testing checks the circuit, isolation and supply to find whether the fixed electrical installation is preventing the heater from working.
- **The cause is explained:** The findings explain whether electrical repair is needed on the fixed installation or whether the fault is within the heater itself.

## What does panel heater fault finding cover?

The price covers the diagnostic visit to test the panel heater supply and identify whether the fixed electrical installation is causing the fault. The price changes if testing finds a failed connection, cable, isolator or other repair that needs parts or further work.
- Fault finding & repair: from £80 an hour
- Testing covers the affected circuit and the supply feeding the panel heater.
- Repair work to the fixed installation is priced once the cause is known.
- A fault inside the panel heater needs separate appliance repair or replacement.

## Panel heater not working questions

### Why is my panel heater cold when the rest of the house has power?

The heater may have an internal fault, its controls may be preventing it from heating, or its own supply may have failed. Testing establishes whether power reaches the heater and whether the fixed installation needs repair.

### Can a panel heater trip the circuit?

Yes. A fault in the heater or its supply can cause a breaker or RCD to switch off. Leave the affected circuit off if it trips again rather than repeatedly restoring power.

### Can TMB Electrics repair a panel heater?

TMB Electrics tests and repairs faults in the fixed electrical installation that supplies the heater. A fault inside the heater itself needs separate appliance repair or replacement.

### What should I do if my panel heater smells of burning?

Stop using the heater and leave its circuit off if it can be isolated safely at the consumer unit. Smoke, scorching, a burning smell or unusual heat needs urgent electrical attention. Book Now.

## Related problems
- [Burning plastic smell from electrics](https://www.tmbelectrics.co.uk/problems/burning-plastic-smell-electrical): A burning plastic smell needs the affected electrical circuit checked before it is used again.
- [Circuit breaker keeps tripping](https://www.tmbelectrics.co.uk/problems/circuit-breaker-keeps-tripping): A repeated trip usually means a circuit, fitting or connected item needs testing.
- [Circuit breaker will not reset](https://www.tmbelectrics.co.uk/problems/circuit-breaker-wont-reset): A circuit breaker that stays off needs the affected circuit checked for a fault.
- [Consumer unit is hot](https://www.tmbelectrics.co.uk/problems/consumer-unit-hot): A hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- [Consumer unit tripping with nothing plugged in](https://www.tmbelectrics.co.uk/problems/consumer-unit-tripping-nothing-plugged-in): A trip with nothing plugged in usually needs the fixed circuit traced and tested.
- [Cooker tripping the electrics](https://www.tmbelectrics.co.uk/problems/cooker-tripping-electrics): A cooker trip can come from its circuit, connection or the appliance itself.

## Sources
- [Electrical Safety First: Safety Guidance](https://www.electricalsafetyfirst.org.uk/guidance/)
- [HSE: Electrical Safety](https://www.hse.gov.uk/electricity/)
- [Energy Saving Trust: Heating Your Home](https://energysavingtrust.org.uk/advice/heating-your-home/)

Updated 2026-11-19.

[Electrical fault finding](https://www.tmbelectrics.co.uk/services/electrical-fault-finding)

## Book or ask a question
- [Book Now](https://www.tmbelectrics.co.uk/#chat)
