---
title: "Power goes off at the same time every day | 5.0 Star · From £50"
description: "Power going off at the same time each day in Banstead can point to a timed circuit or connected item. Find safe checks and when to book."
canonical: "https://www.tmbelectrics.co.uk/problems/power-goes-off-at-same-time-every-day"
---

# Power goes off at the same time every day

> Power going off at the same time each day in Banstead can point to a timed circuit or connected item. Find safe checks and when to book.

TMB Electrics traces timed power loss in Banstead to find whether a circuit, timer controlled load or connected appliance is causing the trip.

## Why does power go off at the same time every day?

Power cutting out at a regular time usually means something starts, switches or heats at that time. Electrical fault finding traces the circuit and checks what changes when the loss happens.
- **A timed appliance starts running:** A washing machine, dishwasher, tumble dryer or other plug in item can develop a fault that appears only when its timer reaches part of the cycle. The item can trip the circuit or an RCD, a safety switch that cuts power when it detects a fault.
- **Heating or hot water switches on:** An immersion heater, storage heater or electric heating control may start at a set time. A fault in the connected equipment or its fixed supply can cause power to switch off when that load begins.
- **A timer controlled circuit comes on:** Outdoor lighting, garden equipment or another timed circuit can start after dark or at a programmed time. Damp or damage in an outside fitting can make the protective device switch off when that circuit starts.
- **A circuit connection fails under load:** A loose connection can remain unnoticed until a timed load draws current. Testing checks the consumer unit, the circuit and connected fittings to find where the fault appears.

## What can I check safely before booking?

You can note the timing and unplug plug in items without opening an appliance or touching any wiring. Leave electrical fittings, consumer unit covers and fixed equipment closed.
- **Write down the exact time:** Note when power goes off, which rooms lose power and what starts around that time. Include heating, hot water, outside lights and any appliance that was running.
- **Unplug plug in items:** Before the usual time, unplug portable appliances, chargers and extension leads from the affected sockets. Do not take an appliance apart or use an item with a damaged plug, burning smell or heat marks.
- **Check visible signs of damage:** Look without touching for scorch marks, smoke, cracking or unusual warmth at sockets, switches and light fittings. Stop using the affected circuit if any of these signs are present.

## When should I book electrical fault finding?

Book electrical fault finding when the power loss repeats, a circuit will not remain on, or there are signs of overheating. Timed faults need testing while the affected circuit and equipment are identified.
- **The same circuit trips each day:** A breaker or RCD that switches off at a regular time needs investigation. Repeatedly restoring power can leave the fault connected to the installation.
- **Power loss follows heating or a timer:** A regular loss when hot water, heating or timed outside equipment starts points to a circuit or connected load that needs checking.
- **There is heat, smoke or scorching:** A burning smell, smoke, scorch mark or hot fitting needs the affected circuit left unused. Electrical fault finding can identify the immediate cause and required repair.

## What happens when power goes off at the same time each day?

The visit starts by matching the reported time with the affected circuit and equipment. Testing then separates a fixed wiring fault from a fault in a connected item.
- **The timed pattern is checked:** The consumer unit, affected rooms and equipment that starts at the same time are checked to establish which circuit has switched off.
- **The circuit is tested:** The circuit is isolated and tested through its sockets, switches, fittings and controls until the fault is narrowed to a part of the installation or a connected item.
- **The cause and repair are explained:** The failed part and the work needed are explained once testing identifies the cause. Fixed wiring repairs can then be priced for the work required.

## What does timed power loss fault finding cover?

The price covers the time needed to trace the circuit that switches off and identify what changes at that time. The price changes when testing finds a failed fitting, damaged cable, control, protective device or repair that needs replacement parts.
- Fault finding & repair: from £80 an hour
- Testing covers the affected circuit, its controls and the connected fittings linked to the timed power loss.
- Replacement parts and fixed wiring repairs are priced once the cause is known.
- A fault in a plug in appliance may need repair or replacement separately.

## Power goes off at the same time every day questions

### Why does my electricity trip at the same time every night?

A timed load may be starting at that time. Heating, hot water, outdoor lighting or a plug in appliance can cause a circuit or RCD to switch off when a fault appears. Testing identifies the circuit and what is connected to it.

### Can an immersion heater make the power go off every day?

An immersion heater can cause a trip when it starts heating if there is a fault in the heater or its electrical supply. Note the time hot water is programmed to come on and whether the same circuit switches off. Testing establishes whether the fault is in the fixed installation or the connected heater.

### Should I keep resetting the breaker when it trips?

No, do not keep resetting a breaker or RCD that switches off again. Unplug portable items from the affected circuit and leave damaged items disconnected. Book electrical fault finding if the circuit will not stay on.

### Can outside lights trip the power at the same time each day?

Yes, timer controlled outdoor lights can trip power when they switch on. Water or damage in an outside fitting can cause the protective device to operate when the circuit becomes live. Testing checks the outside circuit and its fittings.

## Related problems
- [Burning plastic smell from electrics](https://www.tmbelectrics.co.uk/problems/burning-plastic-smell-electrical): A burning plastic smell needs the affected electrical circuit checked before it is used again.
- [Circuit breaker keeps tripping](https://www.tmbelectrics.co.uk/problems/circuit-breaker-keeps-tripping): A repeated trip usually means a circuit, fitting or connected item needs testing.
- [Circuit breaker will not reset](https://www.tmbelectrics.co.uk/problems/circuit-breaker-wont-reset): A circuit breaker that stays off needs the affected circuit checked for a fault.
- [Consumer unit is hot](https://www.tmbelectrics.co.uk/problems/consumer-unit-hot): A hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- [Consumer unit tripping with nothing plugged in](https://www.tmbelectrics.co.uk/problems/consumer-unit-tripping-nothing-plugged-in): A trip with nothing plugged in usually needs the fixed circuit traced and tested.
- [Cooker tripping the electrics](https://www.tmbelectrics.co.uk/problems/cooker-tripping-electrics): A cooker trip can come from its circuit, connection or the appliance itself.

## Sources
- [Electrical Safety First: Safety Guidance](https://www.electricalsafetyfirst.org.uk/guidance/)
- [IET: BS 7671 Guidance Publications](https://electrical.theiet.org/guidance-and-codes-of-practice/publications-by-category/bs-7671-and-guidance/)
- [NICEIC: Householder Guidance](https://niceic.com/householders/)

Updated 2026-11-19.

[Electrical fault finding](https://www.tmbelectrics.co.uk/services/electrical-fault-finding)

## Book or ask a question
- [Book Now](https://www.tmbelectrics.co.uk/#chat)
