---
title: "RCD keeps tripping: causes and what to report | 5.0 Star · From £50"
description: "RCD keeps tripping in Banstead? Find safe checks, likely causes, what to report and when electrical fault finding is needed. · 5.0 Star from 39 reviews"
canonical: "https://www.tmbelectrics.co.uk/problems/rcd-keeps-tripping"
---

# RCD keeps tripping: causes and what to report

> RCD keeps tripping in Banstead? Find safe checks, likely causes, what to report and when electrical fault finding is needed. · 5.0 Star from 39 reviews

An RCD that keeps tripping has detected an electrical fault. TMB Electrics traces the affected circuit in Banstead to identify the cause before repair work is priced.

## Why does an RCD keep tripping?

An RCD is a safety switch in the consumer unit that turns power off when it detects electricity leaking from its intended path.
- **A plug in appliance has a fault:** An appliance, charger or extension lead can cause an RCD to trip. The fault may be inside the item even when its plug and casing look undamaged.
- **Water has reached an outside circuit:** Moisture in an outdoor socket, light fitting or supply can cause the RCD to trip. The fault may appear after rain or when outside equipment is used.
- **A cable or connection is damaged:** A damaged cable or loose connection can leak current and operate the RCD. Testing identifies the affected section without guessing from the trip alone.
- **A fixed electrical fitting has failed:** A fault in a socket, switch, light fitting or fixed appliance connection can trip the RCD. The affected circuit needs testing before it is used again.

## What can I check safely when an RCD trips?

You can note the pattern and unplug items without opening an appliance, removing a fitting or touching mains wiring.
- **Note what lost power:** Check which rooms, sockets, lights and fixed equipment lost power. Note what was running when the RCD tripped and whether it happens at a particular time.
- **Unplug plug in items:** Unplug appliances, chargers and extension leads from the affected areas. Leave any item with damage, heat marks or a burning smell disconnected.
- **Look for visible damage:** Do not use a socket, switch or fitting with smoke, scorching, cracking, unusual warmth or a burning smell. Leave the circuit off if it is already off.

## When should I book electrical fault finding?

Book Now when the RCD trips again, the affected circuit is unclear or any electrical fitting shows signs of overheating.
- **The RCD trips again:** An RCD that trips after plug in items are removed needs testing. Repeated resetting can leave the fault connected to the installation.
- **Power stays off in part of the property:** A circuit may supply more rooms or equipment than expected. Testing identifies what the RCD protects and where the fault is occurring.
- **There is smoke, heat or scorching:** A burning smell, smoke, scorch marks or a hot fitting needs urgent attention. Stop using the affected circuit.

## What happens when an RCD keeps tripping?

The visit starts with the consumer unit and the reported symptoms, then testing narrows the fault to the relevant circuit or connected item.
- **The affected circuits are identified:** The consumer unit is checked against the rooms and equipment affected by the trip to establish which circuits sit behind the RCD.
- **The fault is traced:** Testing separates the fixed installation from connected appliances and narrows the fault through the circuit until the cause is identified.
- **The repair is explained:** The failed part or remaining investigation is explained once the cause is known. Repair work is priced separately when parts or further work are needed.

## What does RCD fault finding cover?

The price covers time spent tracing the RCD trip and identifying the circuit, fitting, cable or connected item causing it. The price changes when testing finds a repair that needs replacement parts, further investigation or work beyond the diagnostic visit.
- Fault finding & repair: from £80 an hour
- Testing covers the affected RCD, its circuits and the fittings linked to the trip.
- Replacement parts and repair work are priced after the cause is known.
- A fault inside a plug in appliance may need separate repair or replacement.

## RCD keeps tripping questions

### What does it mean when an RCD keeps tripping?

It means the RCD has detected electricity leaking from its intended path. The cause can be a plug in appliance, a fixed fitting, an outside circuit, a cable or a connection. Testing identifies which one is responsible.

### Can one appliance make an RCD trip?

Yes. A faulty appliance, charger or extension lead can trip an RCD even with no visible damage. Unplug plug in items from the affected areas and leave any damaged item disconnected.

### Should I keep resetting an RCD that trips?

No. If the RCD trips again, leave the affected circuit unused and book electrical fault finding. Repeated resetting can leave a fault connected to the installation.

### Can rain make an RCD trip?

Yes. Water reaching an outdoor socket, light fitting or cable can operate an RCD. Report whether the trip follows rain and which outside equipment or circuits are connected.

## Related problems
- [Burning plastic smell from electrics](https://www.tmbelectrics.co.uk/problems/burning-plastic-smell-electrical): A burning plastic smell needs the affected electrical circuit checked before it is used again.
- [Circuit breaker keeps tripping](https://www.tmbelectrics.co.uk/problems/circuit-breaker-keeps-tripping): A repeated trip usually means a circuit, fitting or connected item needs testing.
- [Circuit breaker will not reset](https://www.tmbelectrics.co.uk/problems/circuit-breaker-wont-reset): A circuit breaker that stays off needs the affected circuit checked for a fault.
- [Consumer unit is hot](https://www.tmbelectrics.co.uk/problems/consumer-unit-hot): A hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- [Consumer unit tripping with nothing plugged in](https://www.tmbelectrics.co.uk/problems/consumer-unit-tripping-nothing-plugged-in): A trip with nothing plugged in usually needs the fixed circuit traced and tested.
- [Cooker tripping the electrics](https://www.tmbelectrics.co.uk/problems/cooker-tripping-electrics): A cooker trip can come from its circuit, connection or the appliance itself.

## Sources
- [HSE: electrical faults, RCDs and competence](https://www.hse.gov.uk/electricity/faq.htm)
- [IET: BS 7671 Guidance Publications](https://electrical.theiet.org/guidance-and-codes-of-practice/publications-by-category/bs-7671-and-guidance/)
- [NICEIC: Householder Guidance](https://niceic.com/householders/)

Updated 2026-11-19.

[Electrical fault finding](https://www.tmbelectrics.co.uk/services/electrical-fault-finding)

## Book or ask a question
- [Book Now](https://www.tmbelectrics.co.uk/#chat)
