---
title: "RCD tripping at night | 5.0 Star · From £50 | TMB Electrics"
description: "RCD tripping at night in Banstead can come from timed appliances, outside circuits or wiring faults. Find out what to check and when to book."
canonical: "https://www.tmbelectrics.co.uk/problems/rcd-tripping-at-night"
---

# RCD tripping at night

> RCD tripping at night in Banstead can come from timed appliances, outside circuits or wiring faults. Find out what to check and when to book.

An RCD that trips at night can point to a timed appliance, outside circuit or fixed wiring fault. TMB Electrics tests the affected installation to identify what is causing the trip.

## Why does an RCD trip at night?

An RCD can trip at night when a timed item starts, moisture affects an outside circuit, or a fault develops on fixed wiring.
- **A timed appliance starts running:** An appliance set to run overnight can cause the RCD to trip when it switches on. Chargers, washing machines and other plug in items can have an internal fault without visible damage.
- **Outside equipment becomes damp:** Dew, rain or water in an outdoor socket, light or cable can create a fault after dark. The RCD switches off when it detects electricity leaving its intended path.
- **A heating circuit comes on:** A timer can bring an electric heating or hot water circuit into use overnight. Testing separates the circuit from the appliance or controller connected to it.
- **A fixed connection has failed:** A damaged cable, loose connection, socket, switch or light fitting can cause an RCD trip when the circuit is in use. Testing finds the affected part of the installation.

## What can I check safely before booking?

You can note the timing and unplug plug in items without opening appliances, removing fittings or touching mains wiring.
- **Note when the trip happens:** Write down the time of the trip, what lost power and what was running. Note whether it follows rain, outdoor lighting, charging or a timer starting.
- **Unplug plug in items:** Unplug chargers, extension leads and appliances from areas that lost power. Leave any item with heat marks, damage or a burning smell disconnected.
- **Look for visible damage:** Check sockets, switches and light fittings for scorch marks, cracking, smoke or unusual warmth. Do not use anything showing these signs.

## When should I book fault finding for an RCD trip?

Book Now when the RCD trips again, the timing points to a circuit or item you cannot identify, or there are signs of heat damage.
- **The RCD trips again after items are unplugged:** A repeat trip after plug in items are removed needs testing of the fixed installation. Leave the affected circuit off rather than repeatedly resetting it.
- **The trip happens at the same time each night:** A regular pattern can help trace a timer, appliance or circuit that starts overnight. Record the time and any equipment that may be running.
- **There is smoke, heat or scorching:** A burning smell, smoke, scorch marks or a hot fitting needs immediate attention. Stop using the affected circuit.

## What happens when an RCD trips at night?

Electrical Fault Finding & Repair in Banstead starts by identifying what the RCD protects and matching the trip to the equipment or circuits affected.
- **The affected circuits are identified:** The consumer unit is checked against the rooms, fittings and equipment that lost power. This shows which circuits sit behind the RCD.
- **The fault is traced:** Testing separates plug in items from fixed wiring and narrows the fault through the relevant circuit. Timers and outside equipment are considered where they match the reported pattern.
- **The cause is explained:** The failed item, fitting, cable or remaining investigation is explained once testing identifies it. Repair work is priced when the cause and required parts are known.

## What does night time RCD fault finding cover?

The price covers the time needed to investigate the RCD trip, identify the circuits it protects and trace the item or part of the installation causing it. The price changes when testing finds a repair that needs replacement parts, extra investigation or work beyond the diagnostic visit.
- Fault finding & repair: from £80 an hour
- Testing covers the affected RCD, the circuits behind it and connected items linked to the night time trip.
- Replacement parts and repair work are priced once the cause is known.
- A fault inside a plug in appliance may need separate repair or replacement.

## RCD tripping at night questions

### Why does my RCD only trip at night?

Something may be starting on a timer after dark, such as an appliance, heating circuit or outside equipment. Moisture affecting an outside circuit can also cause a trip overnight.

### Can an appliance cause an RCD to trip while I am asleep?

Yes, a plug in appliance can develop a fault that makes the RCD trip when it starts running. Unplug items from the affected areas and leave damaged items disconnected.

### Should I keep resetting an RCD that trips at night?

No, leave the affected circuit off if the RCD trips again. Repeated resetting can leave a fault connected to the installation.

### Can rain make an RCD trip at night?

Yes, water reaching an outdoor socket, light fitting or cable can operate an RCD. Note whether the trip follows rain and which outside equipment is connected.

## Related problems
- [Burning plastic smell from electrics](https://www.tmbelectrics.co.uk/problems/burning-plastic-smell-electrical): A burning plastic smell needs the affected electrical circuit checked before it is used again.
- [Circuit breaker keeps tripping](https://www.tmbelectrics.co.uk/problems/circuit-breaker-keeps-tripping): A repeated trip usually means a circuit, fitting or connected item needs testing.
- [Circuit breaker will not reset](https://www.tmbelectrics.co.uk/problems/circuit-breaker-wont-reset): A circuit breaker that stays off needs the affected circuit checked for a fault.
- [Consumer unit is hot](https://www.tmbelectrics.co.uk/problems/consumer-unit-hot): A hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- [Consumer unit tripping with nothing plugged in](https://www.tmbelectrics.co.uk/problems/consumer-unit-tripping-nothing-plugged-in): A trip with nothing plugged in usually needs the fixed circuit traced and tested.
- [Cooker tripping the electrics](https://www.tmbelectrics.co.uk/problems/cooker-tripping-electrics): A cooker trip can come from its circuit, connection or the appliance itself.

## Sources
- [BS 7671: IET Wiring Regulations (18th Edition)](https://electrical.theiet.org/bs-7671/)
- [Electrical Safety First: Safety Guidance](https://www.electricalsafetyfirst.org.uk/guidance/)
- [NICEIC: Householder Guidance](https://niceic.com/householders/)

Updated 2026-11-19.

[Electrical fault finding](https://www.tmbelectrics.co.uk/services/electrical-fault-finding)

## Book or ask a question
- [Book Now](https://www.tmbelectrics.co.uk/#chat)
