---
title: "Sensor light not working | 5.0 Star · From £50 | TMB Electrics"
description: "Sensor light not working in Banstead? Find common causes, safe checks and when electrical fault finding is needed. · 5.0 Star from 39 reviews"
canonical: "https://www.tmbelectrics.co.uk/problems/sensor-light-not-working"
---

# Sensor light not working

> Sensor light not working in Banstead? Find common causes, safe checks and when electrical fault finding is needed. · 5.0 Star from 39 reviews

TMB Electrics finds why a sensor light is not switching on and tests the affected lighting circuit before repair work.

## Why is my sensor light not working?

A sensor light can stay off, stay on or work only sometimes when the sensor, lamp, fitting or supply has a fault.
- **The sensor setting needs changing:** A PIR sensor detects movement using changes in heat. Its daylight, sensitivity or timer setting can stop the light coming on when you expect.
- **The lamp has failed:** A failed lamp can leave the sensor working but the fitting dark. Some sealed LED fittings need the complete fitting replaced when the light source fails.
- **The sensor cannot detect movement:** Dirt, paint, cobwebs or an object in front of the sensor can block its view. A sensor pointed away from the approach can also miss movement.
- **Water has affected the fitting:** Water in an outside fitting or connection can stop the light working or make the circuit trip. The fitting and circuit need testing before they are used again.
- **The lighting circuit has a fault:** A failed switch, loose connection, damaged cable or protective device can interrupt the supply to the sensor light. Testing identifies where the supply stops.

## What can I check safely before booking?

You can check the light from the ground without opening the fitting, removing covers or touching any wiring.
- **Check the light in darkness:** Wait until it is dark enough for the sensor to allow the light on, then walk through the detection area. Daylight settings can stop a sensor light working during the day.
- **Look for anything blocking the sensor:** Check for leaves, cobwebs, dirt, paint or a new object in front of the sensor. Clean only the outside surface with the power left on and without opening the fitting.
- **Check the lamp where it is removable:** Switch the light off at its normal control before changing a removable lamp. Use a matching lamp and do not force it into a damaged holder.
- **Look for visible damage:** Do not use the light if you can see cracking, scorch marks, loose parts, water inside the fitting or damage to the cable. Leave it switched off.

## When should I book sensor light fault finding?

Book Electrical Fault Finding & Repair when safe checks do not restore the light or the fitting shows signs of damage.
- **The light stays off after safe checks:** A sensor light that remains dark after its setting, sensor view and removable lamp have been checked needs the fitting and supply tested.
- **The light stays on all the time:** A light that remains on can have a sensor, control or wiring fault. Testing separates a setting problem from a fault in the fitting or circuit.
- **The circuit trips:** A breaker or RCD that switches off when the sensor light operates needs investigation. Leave the affected circuit off rather than repeatedly resetting it.
- **There are signs of heat or water damage:** A burning smell, smoke, scorching, cracking or water inside the fitting needs the light left unused until the immediate electrical danger is made safe.

## What happens when a sensor light is tested?

The visit follows the sensor light from its control and fitting back to the lighting circuit until the cause is identified.
- **The light and its controls are checked:** The fitting, sensor position, controls and reported fault are checked to establish whether the issue is with the lamp, sensor or supply.
- **The lighting circuit is tested:** The affected circuit is isolated and tested through the fitting, switch and connections to identify where the electrical fault is.
- **The cause is explained:** The failed part or remaining investigation is explained once testing identifies the cause. Repair work is priced when the required work is known.

## What does sensor light fault finding cover?

The price covers time spent testing the sensor light and its lighting circuit to identify why it is not working. The price changes if testing finds a failed lamp, sensor, fitting, cable, connection or protective device that needs repair or replacement.
- Fault finding & repair: from £80 an hour
- Testing covers the affected sensor light, its controls and the lighting circuit that supplies it.
- Replacement parts and repair work are priced once the cause is known.
- Work needed beyond the affected fitting or circuit is priced separately.

## Sensor light not working questions

### Why does my PIR light not come on?

A PIR light may not come on because its daylight setting is too high, the sensor view is blocked, the lamp has failed or the fitting has lost power. Testing identifies whether the fault is in the sensor light or the lighting circuit.

### Why is my sensor light staying on?

A sensor light can stay on when its timer or sensitivity setting is wrong, movement continues in its detection area, or the sensor has failed. The fitting and its controls can be checked to find the cause.

### Can rain stop an outside sensor light working?

Water reaching an outside fitting, sensor or connection can stop the light working or make the circuit trip. Do not open the fitting. Leave it switched off if there is visible water damage or the circuit will not stay on.

### Can TMB Electrics repair an outside sensor light?

TMB Electrics provides Electrical Fault Finding & Repair for sensor light faults. The fitting and affected circuit are tested first, then the repair work is explained once the cause is known.

## Related problems
- [Burning plastic smell from electrics](https://www.tmbelectrics.co.uk/problems/burning-plastic-smell-electrical): A burning plastic smell needs the affected electrical circuit checked before it is used again.
- [Circuit breaker keeps tripping](https://www.tmbelectrics.co.uk/problems/circuit-breaker-keeps-tripping): A repeated trip usually means a circuit, fitting or connected item needs testing.
- [Circuit breaker will not reset](https://www.tmbelectrics.co.uk/problems/circuit-breaker-wont-reset): A circuit breaker that stays off needs the affected circuit checked for a fault.
- [Consumer unit is hot](https://www.tmbelectrics.co.uk/problems/consumer-unit-hot): A hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- [Consumer unit tripping with nothing plugged in](https://www.tmbelectrics.co.uk/problems/consumer-unit-tripping-nothing-plugged-in): A trip with nothing plugged in usually needs the fixed circuit traced and tested.
- [Cooker tripping the electrics](https://www.tmbelectrics.co.uk/problems/cooker-tripping-electrics): A cooker trip can come from its circuit, connection or the appliance itself.

## Sources
- [Electrical Safety First: Safety Guidance](https://www.electricalsafetyfirst.org.uk/guidance/)
- [BS 7671: IET Wiring Regulations](https://electrical.theiet.org/bs-7671/)
- [NICEIC: Householder Guidance](https://niceic.com/householders/)

Updated 2026-11-19.

[Electrical fault finding](https://www.tmbelectrics.co.uk/services/electrical-fault-finding)

## Book or ask a question
- [Book Now](https://www.tmbelectrics.co.uk/#chat)
