---
title: "Someone got an electric shock: what to do | 5.0 Star · From £50"
description: "Electric shock first aid in Banstead: isolate power safely, get urgent medical help, then arrange testing of the affected electrical circuit."
canonical: "https://www.tmbelectrics.co.uk/problems/someone-got-an-electric-shock"
---

# Someone got an electric shock: what to do

> Electric shock first aid in Banstead: isolate power safely, get urgent medical help, then arrange testing of the affected electrical circuit.

After an electric shock, switch off the electricity only if it is safe, call 999, and do not touch the person while they remain connected. TMB Electrics can trace the electrical fault afterwards.

## Why can someone get an electric shock?

An electric shock happens when a person becomes part of an electrical path. The shock may come from damaged equipment, a faulty fitting or a problem in the fixed installation.
- **A plug in item is damaged:** A damaged plug, lead or appliance can expose someone to electricity. The item must stay disconnected until it has been checked.
- **A socket or switch is damaged:** Cracking, scorch marks, loose parts or heat around a socket or switch can point to a damaged connection behind it.
- **Water has reached electrical equipment:** Water around a socket, outdoor fitting or electrical item can create a path for electricity and cause a shock.
- **A cable or connection has failed:** Damage in a cable or a loose connection can make metal parts live or allow electricity to travel where it should not.

## What can a householder check safely after an electric shock?

A householder can keep clear of the person until the electricity is off and note what was involved. Do not open an appliance, remove a cover or touch mains wiring.
- **Keep clear until power is off:** Do not touch the person while they are still in contact with electricity. Switch off power at the consumer unit only if it can be done safely.
- **Leave the item disconnected:** Leave the appliance, lead or electrical item out of use. Do not plug it back in, take it apart or test it yourself.
- **Look for visible damage:** Note any damaged plug, broken cable, scorch mark, cracking, smoke or burning smell without touching the item or fitting.
- **Note what happened:** Record which item was involved, where it happened and whether a breaker or RCD switched off. An RCD is a safety switch that cuts power when it detects a fault.

## When is electrical fault finding needed after an electric shock?

Electrical fault finding is needed after an electric shock from a fixed fitting, socket, switch or circuit. The affected equipment must remain unused until the cause is identified.
- **The shock came from a socket or switch:** A socket or switch that caused a shock needs testing before anyone uses it again. The circuit may need to remain off.
- **The shock came from fixed electrical equipment:** A light fitting, cooker control switch or other fixed item needs investigation when it has caused a shock.
- **There are marks or heat damage:** Smoke, a burning smell, scorching or unusual warmth means the affected circuit needs making safe before further testing or repair.

## What happens during fault finding after an electric shock?

The visit starts by identifying the item and circuit involved, then testing the installation until the electrical cause is found.
- **The affected circuit is identified:** The consumer unit and the reported fitting or item are checked to establish which circuit supplied it.
- **The circuit is tested:** Testing narrows the problem through the socket, switch, fitting, cable or connected item without guessing from the symptom.
- **The unsafe part is isolated:** The dangerous circuit, fitting or item is kept out of use while safe circuits remain available where they can be.
- **The repair is explained:** Once the cause is known, the failed part and any repair needed are explained before further work is priced.

## What does fault finding after an electric shock cover?

The price covers time spent testing the affected circuit and identifying what caused the electric shock. The price changes if testing finds a failed socket, switch, fitting, cable, connected item or repair that needs replacement parts.
- Fault finding & repair: from £80 an hour
- Testing covers the electrical circuit and fittings linked to the electric shock.
- Replacement parts and repair work are priced once the cause is known.
- A fault inside a plug in appliance may need separate repair or replacement.

## Electric shock questions

### Should I touch someone who has had an electric shock?

No. Do not touch them while they are still in contact with electricity. Switch off the electricity only if it is safe, then call 999 for urgent medical help.

### Does someone need medical help after an electric shock?

Yes. An electric shock can cause injury that is not obvious from the skin. Call 999 after an electric shock, especially if the person is unconscious, has breathing problems or has a burn.

### Can I use the socket or appliance again if it looks undamaged?

No. Leave the socket, appliance or fitting out of use until it has been checked. Damage inside an electrical item or connection may not be visible.

### Can TMB Electrics find what caused the shock?

Yes. Electrical Fault Finding & Repair tests the affected circuit and fitting to identify whether the cause is in the fixed installation or a connected item. Any repair is priced after the cause is known.

## Related problems
- [Burning plastic smell from electrics](https://www.tmbelectrics.co.uk/problems/burning-plastic-smell-electrical): A burning plastic smell needs the affected electrical circuit checked before it is used again.
- [Circuit breaker keeps tripping](https://www.tmbelectrics.co.uk/problems/circuit-breaker-keeps-tripping): A repeated trip usually means a circuit, fitting or connected item needs testing.
- [Circuit breaker will not reset](https://www.tmbelectrics.co.uk/problems/circuit-breaker-wont-reset): A circuit breaker that stays off needs the affected circuit checked for a fault.
- [Consumer unit is hot](https://www.tmbelectrics.co.uk/problems/consumer-unit-hot): A hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- [Consumer unit tripping with nothing plugged in](https://www.tmbelectrics.co.uk/problems/consumer-unit-tripping-nothing-plugged-in): A trip with nothing plugged in usually needs the fixed circuit traced and tested.
- [Cooker tripping the electrics](https://www.tmbelectrics.co.uk/problems/cooker-tripping-electrics): A cooker trip can come from its circuit, connection or the appliance itself.

## Sources
- [Electrical Safety First: First aid tips for electric shock](https://www.electricalsafetyfirst.org.uk/safety-advice/home-and-people/house-maintenance/first-aid/)
- [St John Ambulance: Electric shock first aid](https://www.sja.org.uk/first-aid-advice/electrocution/)
- [NHS: Burns and scalds](https://www.nhs.uk/conditions/burns-and-scalds/)

Updated 2026-11-19.

[Electrical fault finding](https://www.tmbelectrics.co.uk/services/electrical-fault-finding)

## Book or ask a question
- [Book Now](https://www.tmbelectrics.co.uk/#chat)
