---
title: "Two way light switch not working | 5.0 Star · From £50 | TMB Electrics"
description: "Two way light switch fault finding in Banstead for stair and landing lights that no longer work from one or both switches. · 5.0 Star from 39 reviews"
canonical: "https://www.tmbelectrics.co.uk/problems/two-way-switch-not-working"
---

# Two way light switch not working

> Two way light switch fault finding in Banstead for stair and landing lights that no longer work from one or both switches. · 5.0 Star from 39 reviews

A two way light switch fault can stop a landing or stair light working from one or both positions. TMB Electrics traces the lighting circuit and identifies the failed part.

## Why is my two way light switch not working?

A two way switch lets one light work from two positions, such as the bottom and top of the stairs. A fault can be in either switch, the light fitting or the wiring between them.
- **One switch mechanism has failed:** A worn switch mechanism can stop the light responding from one position. The other switch may still appear to work, or neither switch may operate the light.
- **A connection has come loose:** A loose connection at a switch or light fitting can interrupt the lighting circuit. It can also cause flickering before the light stops working.
- **The light fitting has failed:** A failed lamp holder, ceiling rose or light fitting can leave both switches unable to turn the light on. Testing separates a fitting fault from a switch fault.
- **The lighting circuit has switched off:** A circuit breaker is a switch in the consumer unit that cuts power when it detects a fault. The stair or landing light can stop working while sockets remain on.

## What can I check safely before booking?

You can check what the switches and light do without opening a switch plate, removing a fitting or touching mains wiring.
- **Try both switch positions:** Check whether the light works from either position. Note whether one switch feels loose, sticks or does nothing when the other switch is in a certain position.
- **Try a known working lamp:** Switch the light off and fit a known working lamp of the correct type if the fitting takes a removable lamp. Do not force a lamp into a damaged holder.
- **Check other lights nearby:** See whether other lights on the same floor still work. This helps show whether the fault is limited to one light or affects part of the lighting circuit.
- **Look for visible heat damage:** Do not use a switch or fitting with scorch marks, cracking, smoke, a burning smell or unusual warmth. Leave the light off until it has been checked.

## When should I book a two way switch repair?

Book Now when the light will not work from either position, a switch is damaged, or the lighting circuit will not stay on.
- **Neither switch turns the light on:** When both switch positions fail, testing checks the switches, fitting and shared lighting circuit to find where power has stopped.
- **One switch is loose or damaged:** A cracked plate, loose switch or switch that feels hot needs checking before the light is used again.
- **The breaker switches off again:** A lighting breaker that switches off again needs testing. Leave it off rather than repeatedly restoring power.

## What happens when a two way switch is repaired?

The visit starts with the affected light and both switches, then follows the lighting circuit until the failed part is identified.
- **The lighting circuit is identified:** The consumer unit, light fitting and both switches are checked to establish which circuit supplies the light.
- **The switches and fitting are tested:** The lighting circuit is isolated and tested to narrow the fault to a switch, fitting, connection or cable section.
- **The repair is explained:** The failed part and the work needed are explained once the cause is known. A simple repair can be completed when the required work is clear.

## What does two way switch fault finding cover?

The price covers the time needed to investigate the affected light, both switch positions and the lighting circuit. It changes when testing finds a failed switch, light fitting, damaged cable, loose connection or repair that needs replacement parts.
- Fault finding & repair: from £80 an hour
- Testing covers the affected light, both switch positions and the lighting circuit that serves them.
- Replacement parts and repair work are priced after the cause is known.

## Two way light switch questions

### Why does my stair light work from one switch but not the other?

One switch mechanism or its connection may have failed. The light can still work from the other position because both switches are part of the same lighting arrangement. Testing identifies whether the fault is at the switch, fitting or wiring.

### Can I replace a two way light switch myself?

A two way switch has more than one connection, and the terminals must be returned correctly for both positions to work. TMB Electrics can test the circuit and replace the failed part when the fault is in the fixed wiring.

### Why does the light only work in one switch position?

The two switches work together, so one position can leave the circuit unable to complete. A failed switch mechanism or loose connection can cause this pattern. Testing checks both switches and the light fitting.

### Can a faulty light fitting make both switches stop working?

Yes. A fault at the light fitting can stop both switches operating the lamp even when the switches themselves are sound. The fitting and circuit are tested before any replacement is fitted.

## Related problems
- [Burning plastic smell from electrics](https://www.tmbelectrics.co.uk/problems/burning-plastic-smell-electrical): A burning plastic smell needs the affected electrical circuit checked before it is used again.
- [Circuit breaker keeps tripping](https://www.tmbelectrics.co.uk/problems/circuit-breaker-keeps-tripping): A repeated trip usually means a circuit, fitting or connected item needs testing.
- [Circuit breaker will not reset](https://www.tmbelectrics.co.uk/problems/circuit-breaker-wont-reset): A circuit breaker that stays off needs the affected circuit checked for a fault.
- [Consumer unit is hot](https://www.tmbelectrics.co.uk/problems/consumer-unit-hot): A hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- [Consumer unit tripping with nothing plugged in](https://www.tmbelectrics.co.uk/problems/consumer-unit-tripping-nothing-plugged-in): A trip with nothing plugged in usually needs the fixed circuit traced and tested.
- [Cooker tripping the electrics](https://www.tmbelectrics.co.uk/problems/cooker-tripping-electrics): A cooker trip can come from its circuit, connection or the appliance itself.

## Sources
- [BS 7671: IET Wiring Regulations](https://electrical.theiet.org/bs-7671/)
- [Electrical Safety First: Safety Guidance](https://www.electricalsafetyfirst.org.uk/guidance/)
- [NICEIC: Householder Guidance](https://niceic.com/householders/)

Updated 2026-11-19.

[Electrical fault finding](https://www.tmbelectrics.co.uk/services/electrical-fault-finding)

## Book or ask a question
- [Book Now](https://www.tmbelectrics.co.uk/#chat)
