---
title: "Water on electrics: what to do | 5.0 Star · From £50 | TMB Electrics"
description: "Water on electrics in Banstead needs the affected circuit left unused and checked. TMB Electrics traces water damage and makes unsafe circuits safe."
canonical: "https://www.tmbelectrics.co.uk/problems/water-on-electrics"
---

# Water on electrics: what to do

> Water on electrics in Banstead needs the affected circuit left unused and checked. TMB Electrics traces water damage and makes unsafe circuits safe.

TMB Electrics makes a water affected electrical circuit safe, then tests it to find the fault and explain the repair needed.

## Why has water reached the electrics?

Water can reach electrical equipment through a leak, flooding, condensation or rain entering an outside fitting. The affected circuit needs testing before it is used again.
- **A leak has reached a fitting:** Water from a pipe, roof or appliance leak can reach a socket, light fitting, switch or cable connection. Moisture can create a fault even after the visible water has gone.
- **Rain has entered outside equipment:** Rain can enter an outside socket, light, joint or cable connection. A circuit may trip when water reaches a damaged seal or fitting.
- **Floodwater has reached the circuit:** Floodwater can affect sockets, cables and connections close to the floor. The circuit should stay off until testing identifies what water reached.
- **Condensation has built up:** Condensation can collect around electrical equipment in damp spaces. It can affect a connection or protective device and cause the circuit to trip.

## What can I check safely when water reaches electrics?

Stay clear of wet electrical equipment and do not touch water near a socket, fitting or cable. Only check what you can see from a dry position.
- **Keep clear of the affected area:** Do not touch a wet socket, switch, appliance, cable or puddle near electrical equipment. Keep other people away from the affected area.
- **Switch off the supply if it is safe:** Turn off power at the consumer unit only when you can reach it without going near water and the area is dry. Do not remove the consumer unit cover.
- **Note what water has reached:** Record whether water reached a socket, light, switch, consumer unit or outside fitting. Note the leak or weather event that happened before the fault.

## When should I book an electrician for water on electrics?

Book Electrical Fault Finding & Repair when water has reached electrical equipment or a circuit trips after a leak, flood or rain.
- **Water has reached a socket or fitting:** A wet socket, switch, light fitting or cable needs testing before it is used. Leave the affected circuit off where it has already switched off.
- **The circuit trips after water arrives:** A circuit breaker or RCD that trips after water reaches the property needs investigation. An RCD is a safety switch that cuts power when it detects a fault.
- **There is smoke, heat or scorching:** Smoke, a burning smell, scorch marks or unusual warmth means the affected circuit needs making safe. Stop using it and book Emergency call out & make safe.

## What happens when water has reached electrics?

We start by making the affected circuit safe, then test the electrical equipment and connections that water may have reached.
- **The affected circuit is isolated:** We identify the circuit supplying the wet area and isolate it before testing starts. Other circuits remain available where they are safe to use.
- **The water affected equipment is tested:** We test the circuit, fittings and connections to find where moisture has caused a fault or damage.
- **The repair is explained:** We explain what water affected and what work is needed to repair it. A repair needing parts or further work is priced once the cause is known.

## What does water damage fault finding cover?

The price covers time spent making the affected circuit safe and tracing where water has affected the electrical installation. The price changes when testing finds damaged fittings, cable, connections, replacement parts or repair work beyond the investigation.
- Fault finding & repair: from £80 an hour
- Testing covers the affected circuit and the electrical equipment reached by water.
- Parts and repair work are priced once the water damage and required work are known.
- Emergency make safe work and later permanent repair are priced for the work needed.

## Water on electrics questions

### Can I use a socket after water has leaked near it?

No. Leave the socket unused until the affected circuit and socket have been checked. Water can remain inside a fitting or connection after the surface looks dry.

### Should I turn off the consumer unit if water is near it?

Turn off the supply only if you can reach the consumer unit from a dry area without going near water. Do not touch a wet consumer unit or remove its cover.

### Can rain make an outside circuit trip?

Yes. Water entering an outside socket, light or cable connection can cause a circuit breaker or RCD to switch off. The affected circuit needs testing before it is used again.

## Related problems
- [Burning plastic smell from electrics](https://www.tmbelectrics.co.uk/problems/burning-plastic-smell-electrical): A burning plastic smell needs the affected electrical circuit checked before it is used again.
- [Circuit breaker keeps tripping](https://www.tmbelectrics.co.uk/problems/circuit-breaker-keeps-tripping): A repeated trip usually means a circuit, fitting or connected item needs testing.
- [Circuit breaker will not reset](https://www.tmbelectrics.co.uk/problems/circuit-breaker-wont-reset): A circuit breaker that stays off needs the affected circuit checked for a fault.
- [Consumer unit is hot](https://www.tmbelectrics.co.uk/problems/consumer-unit-hot): A hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- [Consumer unit tripping with nothing plugged in](https://www.tmbelectrics.co.uk/problems/consumer-unit-tripping-nothing-plugged-in): A trip with nothing plugged in usually needs the fixed circuit traced and tested.
- [Cooker tripping the electrics](https://www.tmbelectrics.co.uk/problems/cooker-tripping-electrics): A cooker trip can come from its circuit, connection or the appliance itself.

## Sources
- [HSE: Electrical Safety at Work](https://www.hse.gov.uk/electricity/)
- [Electrical Safety First: Safety Guidance](https://www.electricalsafetyfirst.org.uk/guidance/)

Updated 2026-11-19.

[Electrical fault finding](https://www.tmbelectrics.co.uk/services/electrical-fault-finding)

## Book or ask a question
- [Book Now](https://www.tmbelectrics.co.uk/#chat)
