Bronze
£12/mo
Billed annually at £144Save 20%
Lower rates on every job, plus a free safety certificate each year.
- 5% off labour
- 5% off certificates
- Free safety certificate, once a year
Extractor fan installation
TMB Electrics carries out extractor fan installation for homeowners, landlords and businesses across Banstead and Surrey. The fan is fitted, wired and tested so steam and stale air leave the room.
“I keep things straightforward: you deal with me from the first quote to the final check, with clear advice and no surprises along the way.”
Trevor BushElectrician
Extractor fan installation for homes and businesses
- TMB Electrics installs extractor fans for homeowners, landlords and businesses when a kitchen, bathroom or utility room no longer clears steam.
- After a shower the walls stay wet and the mirror fogs because the old fan is weak or dead.
- Kitchen air hangs around long after you have cooked because there is no fan over the hob or it no longer pulls.
- A fan that rattles, trips a breaker or barely turns is due for a replacement rather than another clean.
What is covered
Extractor fan installation covers fitting the fan, wiring it to a suitable supply, and testing that it runs.
Included
- Removing an existing extractor fan
- Fitting the new extractor fan
- Wiring to a suitable supply or fused spur, the switched fused connection beside the fan
- Testing that the fan runs from its switch
- Clearing the work area when the job is finished
Not included
- Forming a new hole through a wall, roof or window
- Making good plaster, paint or tiles around a new opening
- The cost of a decorative fan bought from another seller
What happens on the day
On the day the old extractor fan comes out, the new one is wired in, and you see it run before TMB Electrics leaves.
- 01
Arrival and isolation
The circuit is isolated and the old fan comes out so the new one can use the same supply when it is sound.
- 02
Fitting and wiring
The new extractor fan is mounted and wired to the switch or controller that comes with it.
- 03
Testing and paperwork
The fan is switched on to confirm it runs, and a minor works certificate from £80 is written if you asked for one.
Extractor fan installation prices
Extractor fan installation starts from £120. The starting price buys fitting and wiring a standard extractor fan, with extra for a new circuit or a longer cable run.
- The £120 figure is the starting price for a standard extractor fan installation.
- A new circuit, a longer cable run or a replacement fused spur is priced in writing before work begins.
- Minor works certification for the same visit starts from £80.
What you get with a new extractor fan
You are left with a working extractor fan that clears steam and stale air from the room.
- A drier bathroom or kitchen
- Steam and cooking moisture leave through the fan instead of sitting on paint, grout and window frames.
- Control from the light or a pull cord
- The fan runs from the light, a pull cord or its own switch, whichever the fitting and the wiring allow.
- The old unit removed
- The old unit is gone, the new fan sits square, and the work area is left clear.
Why customers choose TMB Electrics
From £120, extractor fan installation is confirmed in a written quote. Part P certification is held for work that counts as notifiable.
Electrical maintenance plans
Bronze, Silver and Gold plans provide lower rates, an annual safety certificate and priority booking on the higher plans.
Silver
Popular£20/mo
Billed annually at £240Save 20%
Double the discount, next-day priority, and a free safety certificate each year.
- 10% off labour
- 10% off certificates
- Free safety certificate, once a year
- Next day priority
Gold
£31/mo
Billed annually at £372Save 20%
Best rates, same-day priority booking, three free safety certificates a year.
- 15% off labour
- 15% off certificates
- Free safety certificates, 3 times a year
- Same day priority booking
- 2 emergency call-outs a year
Recent work from TMB Electrics
These photographs show work completed across the wider service area covered by TMB Electrics; they are not all presented as extractor fan installation work.
Extractor fan installation questions
People ask TMB Electrics about extractor fan cost, bathroom and kitchen fitting, certificates, and what follows a booking.
How much does extractor fan installation cost?+
Extractor fan installation from TMB Electrics is from £120. A longer cable run or a new circuit is set out in writing first. The fan is then fitted and tested on the booked visit.
— Trevor Bush
Do you fit bathroom extractor fans?+
Yes. TMB Electrics installs extractor fans in bathrooms, kitchens and utility rooms. The fan is wired to a suitable supply and tested so steam leaves the room.
— Trevor Bush
Do I need a certificate for a new extractor fan?+
A like for like swap on an existing circuit often needs only a running test, plus a minor works certificate from £80 if you want that record. A new circuit is written up as a bigger electrical change. TMB Electrics is Part P certified for notifiable work when the job falls under those rules.
Can the fan run from the light switch?+
Yes, when the existing wiring allows it. TMB Electrics wires the extractor fan to the light, a pull cord or a separate switch, whichever the circuit can support. That choice is set out in the written price before the visit.
What happens after I book extractor fan installation?+
After you book, TMB Electrics fits the extractor fan on the booked visit and tests it before leaving. A minor works certificate from £80 is added when you want that record. The booking line answers calls at any time, and the visit is arranged from that booking.
Book Online
Extractor fan installation with TMB Electrics is booked online when the bathroom mirror is still fogged after the shower.