Dimmer switch not working
A dimmer can fail because of the lamps, the dimmer itself or the lighting circuit. TMB Electrics traces the fault in Banstead and identifies the part that needs attention.
Calls answered 24/7
- 14 years trading
- Local to Banstead
- Clear, upfront quotes
Why is my dimmer switch not working?
A dimmer works by reducing power to compatible lamps. The fault may be in the lamps, the control or the lighting circuit feeding it.
- The lamps do not suit the dimmerSome LED lamps need a dimmable rating and a compatible dimmer. Lamps that do not match can flicker, buzz, stay dim or fail to turn on.
- The dimmer has failedA worn dimmer can stop responding, make a buzzing sound or leave the light off. Testing separates a failed control from a fault elsewhere on the circuit.
- A lamp has failedOne failed lamp can affect how some dimmers work, especially where several lamps share one fitting or circuit.
- A connection on the lighting circuit has failedA loose or damaged connection at a switch, light fitting or cable can stop the dimmer controlling the light. The circuit needs testing before it is used again.
What can I check safely before booking?
You can check the lamps and note what the dimmer does without removing a switch plate, opening a fitting or touching any mains wiring.
- Check whether the lamps are dimmableLook at the lamp packaging or printing on the lamp for its dimmable marking. Do not remove a lamp if the fitting is damaged, hot or showing scorch marks.
- Try a known working matching lampWith the light switched off, fit a known working lamp of the correct type where it can be changed safely. Do not force a lamp into the holder.
- Note what the dimmer doesRecord whether the light flickers, buzzes, stays off, changes brightness or trips the lighting circuit. This helps identify whether the fault follows the lamps or the control.
- Look for visible heat damageDo not use a switch or fitting with smoke, cracking, scorch marks, unusual warmth or a burning smell. Leave the light off and book testing.
When should I book a dimmer repair?
Book Electrical Fault Finding & Repair when changing a suitable lamp does not restore the light, the dimmer behaves unpredictably or the circuit will not stay on.
- The light still does not workA dimmer that will not switch the light on after a suitable lamp is checked needs testing at the switch, fitting and lighting circuit.
- The lights flicker or buzzFlickering or buzzing can come from incompatible lamps, a failing dimmer or a poor connection. Testing identifies which part is responsible.
- The lighting circuit tripsA breaker that switches off again needs investigation. Leave the affected lighting circuit unused rather than repeatedly restoring power.
- There is heat or visible damageA hot switch, burning smell, smoke or scorch mark needs the affected circuit left off and made safe before further use.
What happens when a dimmer is tested?
The visit starts with the lamps and the dimmer, then follows the lighting circuit until the cause is identified.
- The lighting circuit is identifiedThe consumer unit, dimmer and affected lights are checked to establish which circuit supplies the fitting.
- The dimmer and lamps are testedThe circuit is isolated before the dimmer and connections are tested. The lamps are checked for the type and load the dimmer can control.
- The fault is tracedTesting narrows the problem to the lamps, dimmer, fitting, connection or another part of the lighting circuit.
- The repair is explainedThe failed part and any work needed are explained once the cause is known. Repair work is priced before replacement parts or further work begin.
What does dimmer switch fault finding cover?
The price covers the time needed to test the affected dimmer, lamps and lighting circuit, then identify why the light will not switch on or dim correctly. The price changes if testing finds a failed dimmer, unsuitable lamps, damaged fitting, cable fault or repair needing replacement parts.
From £80 an hour
Included when agreed
- Testing the affected circuit and the fuse board
- Tracing the fault to the socket, fitting, cable or appliance
- Repairs that can be done on the spot with parts carried
- A clear explanation of what was wrong
Not included automatically
- New circuits or upgrades the fault reveals, which are quoted separately
- Repairs to the appliance itself
Ways to pay


- Pay by bank
- Bank transfer
- Testing covers the dimmer, the affected lighting circuit and the connected light fittings.
- Replacement lamps, dimmers and repair work are priced after the cause is known.
- A fault inside a light fitting may need parts or further repair after testing.
How booking works
Tell us about the job
Tap Book Now and describe the work in the chat. Photos help.
Get your price
You see your price in the chat. A set price is paid at checkout; any other job is quoted first.
Choose your visit
Give your address and when you are free, and the visit is arranged.
Why choose TMB Electrics
- Reviews
- 39
- Rating
- 5.0
- Trading since
- 2012
“I keep things straightforward: you deal with me from the first quote to the final check, with clear advice and no surprises along the way.”
Trevor Bush, TMB Electrics
Book NowWhy do LED lights flicker on my dimmer?
The lamps may not be dimmable, or the dimmer may not suit their load. A failing dimmer or a connection fault can cause the same symptom, so testing identifies the cause before a replacement is fitted.
Can I replace a dimmer with a normal light switch?
Yes, a dimmer can be replaced with a standard on and off switch on the existing lighting circuit. The circuit and connections are checked before the new switch is fitted and tested.
Why does my dimmer make a buzzing sound?
A buzzing sound can come from the dimmer or from lamps that do not suit it. If the sound is new, gets louder or comes with heat, leave the light off and book testing.
Can one faulty bulb stop a dimmer working?
Yes, a failed lamp can affect some dimmers, particularly where several lamps run from one control. A known working matching lamp can help show whether the problem follows the lamp or remains at the dimmer.
Related problems
- Burning plastic smell from electricsA burning plastic smell needs the affected electrical circuit checked before it is used again.
- Circuit breaker keeps trippingA repeated trip usually means a circuit, fitting or connected item needs testing.
- Circuit breaker will not resetA circuit breaker that stays off needs the affected circuit checked for a fault.
- Consumer unit is hotA hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- Consumer unit tripping with nothing plugged inA trip with nothing plugged in usually needs the fixed circuit traced and tested.
- Cooker tripping the electricsA cooker trip can come from its circuit, connection or the appliance itself.
Sources
- Electrical Safety First: Safety Guidance
- NICEIC: Householder Guidance
- IET: BS 7671 Guidance Publications
Updated 19 November 2026
