Half the house has no electricity

Half a house without electricity usually means one circuit has tripped or developed a fault. TMB Electrics traces the affected circuit in Banstead and identifies why its sockets or lights have stopped working.

Calls answered 24/7

  • 14 years trading
  • Local to Banstead
  • Clear, upfront quotes

Why does half the house have no electricity?

A partial loss of power usually affects one circuit or group of circuits rather than the incoming supply to the whole house.

  • A circuit breaker has trippedA circuit breaker is a switch in the consumer unit that turns power off when it detects a fault. Everything connected to that circuit can lose power while other rooms stay on.
  • An RCD has switched offAn RCD is a safety switch that turns power off when it detects current going where it should not. It can affect several circuits, leaving one part of the house without sockets, lights or both.
  • A plug in item has caused a faultAn appliance, charger or extension lead can cause a circuit to trip. The fixed wiring still needs testing when the circuit will not stay on after plug in items are removed.
  • A connection or cable has failedA loose connection, damaged accessory or fault in a cable can stop power reaching the rest of a circuit. Testing finds where the supply stops.

What can I check safely before booking?

You can identify what has stopped working and remove plug in items without opening appliances or touching mains wiring.

  • Check which rooms have lost powerSee whether the loss affects sockets, lights or both. Check a room with working power so the affected part of the house is clear.
  • Unplug items on the affected circuitUnplug appliances, chargers and extension leads from sockets without taking anything apart. Leave any item with damage, heat marks or a burning smell disconnected.
  • Look for visible signs of heat damageDo not use a socket, switch or light fitting with scorch marks, cracking, smoke or unusual warmth. Leave the affected circuit off if it is already off.

When should I book electrical fault finding?

Book fault finding when power remains off, a circuit trips again, or the cause is not clear from the affected rooms and items.

  • The circuit will not stay onA breaker or RCD that switches off again needs testing. Repeatedly restoring power can leave the fault connected.
  • Several rooms have no sockets or lightsPower loss across part of the house can mean one circuit supplies more rooms than expected. Testing identifies the circuit and the point where power stops.
  • There is heat, smoke or scorchingA burning smell, smoke, scorch mark or hot fitting needs the affected circuit left unused while the immediate danger is made safe.

What happens when half the house has no electricity?

The visit follows the affected supply from the consumer unit through the rooms without power until testing identifies the fault.

  • The affected circuit is identifiedWe check the consumer unit and the rooms without power to establish which breaker or RCD serves them.
  • The circuit is tested in sectionsTesting narrows the fault through the circuit, sockets, switches and lights until the failed part or section is identified.
  • The repair is explainedWe explain what caused the power loss and what work is needed to repair it. Any repair beyond the investigation is priced once the cause is known.

What does electrical fault finding cover?

The price covers time spent tracing the circuit that has lost power and identifying why it stopped working. The price changes when testing finds a failed socket, switch, light fitting, cable, connected item or repair that needs parts.

From £80 an hour

Included when agreed

  • Testing the affected circuit and the fuse board
  • Tracing the fault to the socket, fitting, cable or appliance
  • Repairs that can be done on the spot with parts carried
  • A clear explanation of what was wrong

Not included automatically

  • New circuits or upgrades the fault reveals, which are quoted separately
  • Repairs to the appliance itself

Ways to pay

  • Visa
  • Mastercard
  • American Express
  • Apple Pay
  • Google Pay
  • Pay by bank
  • Bank transfer
  • Testing covers the affected circuit and the connected fittings that relate to the power loss.
  • Replacement parts and repair work are priced once testing identifies the cause.
  • A fault in a plug in appliance may need separate repair or replacement.

View the fault finding cost guide

How booking works

  1. Tell us about the job

    Tap Book Now and describe the work in the chat. Photos help.

  2. Get your price

    You see your price in the chat. A set price is paid at checkout; any other job is quoted first.

  3. Choose your visit

    Give your address and when you are free, and the visit is arranged.

Why choose TMB Electrics

Photo of Trevor BushTrevor BushElectrician
Reviews
39
Rating
5.0
Trading since
2012
“I keep things straightforward: you deal with me from the first quote to the final check, with clear advice and no surprises along the way.”

Trevor Bush, TMB Electrics

Book Now

Half the house has no electricity questions

Still have a question?

Why is half my house without power but the other half works?

The house may have separate circuits for different rooms, sockets and lights. A tripped breaker, an RCD or a fault on one circuit can leave only the part it supplies without power.

Can one appliance cause half the house to lose electricity?

Yes, a faulty plug in item can trip the circuit or RCD that supplies several rooms. Unplug the items on the affected circuit, but book testing if power does not stay on.

Can you find a fault when some rooms still have electricity?

Yes, the working rooms help identify what remains on and what has lost supply. We test the affected circuit from the consumer unit through the sockets, switches and lights it serves.

Related problems

Sources

Updated 19 November 2026

Book or ask a question

Calls answered 24/7