Driveway lights not working
TMB Electrics traces driveway lighting faults in Banstead, finding the affected circuit or fitting and explaining the work needed to restore the lights.
Calls answered 24/7
- 14 years trading
- Local to Banstead
- Clear, upfront quotes
Why are my driveway lights not working?
Driveway lights can fail when water reaches an outdoor fitting, a control stops switching, or a fault develops on the circuit that supplies the lights.
- Water in an outdoor fittingRainwater can reach a light fitting, connection or outdoor enclosure and cause the circuit to switch off. The affected part needs testing before the lights are used again.
- A failed light fittingA damaged lamp holder, internal connection or light fitting can stop one light or several lights from working. Testing identifies whether the fault is in the fitting or further back on the circuit.
- A control has stopped switchingA switch, timer or sensor can stop the driveway lights coming on when expected. Testing checks the control and the supply that reaches it.
- A fault on the outdoor circuitDamage to a cable or connection can interrupt power to lights further along the driveway. Testing finds where the supply stops.
What can I check safely before booking?
You can check what has stopped working and note the pattern without opening fittings, removing covers or touching mains wiring.
- Check which lights are offNote whether one light, every driveway light, or other outdoor equipment has stopped working. This helps identify whether the problem is limited to one fitting or affects the circuit.
- Note the weather and timingRecord whether the lights stopped after rain, at dusk, or when a timer or sensor should have switched them on. These details help focus the testing.
- Look for visible damageDo not use a fitting with cracking, scorch marks, smoke, a burning smell or unusual warmth. Leave the affected lights off and arrange electrical fault finding.
When should I book driveway lighting fault finding?
Book Now when the driveway lights remain off, the circuit switches off again, or an outdoor fitting shows damage or overheating.
- The lights stay offLights that do not return after a simple control check need testing. The fault may be in a fitting, cable, connection or the circuit protection.
- The circuit switches off againA circuit that switches off after being restored needs investigation. Repeated resetting can leave a fault connected to the outdoor installation.
- There is heat or visible damageScorching, smoke, a burning smell or a hot fitting needs the affected circuit left unused while the electrical fault is traced.
What happens when driveway lights are not working?
The visit starts with the lights and controls that have failed, then follows the outdoor circuit through testing until the fault is identified.
- The affected lights are identifiedThe driveway lights, controls and consumer unit are checked to establish which circuit supplies the fault.
- The outdoor circuit is testedTesting narrows the fault through the fittings, controls, connections and cable until the failed part or section is found.
- The repair is explainedThe cause and the work needed are explained once testing identifies the fault. Any repair beyond the diagnostic visit is priced when the required work is known.
What does driveway lighting fault finding cover?
The price covers time spent investigating the driveway lighting circuit and identifying why the lights have stopped working. It changes when testing finds a failed fitting, control, cable, connection or repair that needs replacement parts.
From £80 an hour
Included when agreed
- Testing the affected circuit and the fuse board
- Tracing the fault to the socket, fitting, cable or appliance
- Repairs that can be done on the spot with parts carried
- A clear explanation of what was wrong
Not included automatically
- New circuits or upgrades the fault reveals, which are quoted separately
- Repairs to the appliance itself
Ways to pay


- Pay by bank
- Bank transfer
- Testing covers the affected outdoor lighting circuit, fittings and controls linked to the fault.
- Replacement parts and repair work are priced once the cause is known.
- A fault in a connected item may need separate repair or replacement.
How booking works
Tell us about the job
Tap Book Now and describe the work in the chat. Photos help.
Get your price
You see your price in the chat. A set price is paid at checkout; any other job is quoted first.
Choose your visit
Give your address and when you are free, and the visit is arranged.
Why choose TMB Electrics
- Reviews
- 39
- Rating
- 5.0
- Trading since
- 2012
“I keep things straightforward: you deal with me from the first quote to the final check, with clear advice and no surprises along the way.”
Trevor Bush, TMB Electrics
Book NowWhy do my driveway lights stop working after rain?
Water can reach an outdoor light fitting, connection or cable and cause the circuit to switch off. Note whether the fault follows rain and leave any damaged fitting unused until the circuit has been tested.
Can one failed driveway light stop the others working?
Yes, a failed connection or fitting can interrupt power to lights further along the same circuit. Testing shows whether the fault is at one light, a connection, a control or the cable between them.
Should I keep switching the driveway lights back on?
No, do not keep restoring a circuit that switches off again. Leave the affected lights unused and book electrical fault finding to identify what is causing the trip.
Can a timer or sensor stop driveway lights working?
Yes, a timer or sensor can stop switching the lights on when expected. Testing checks whether the control has failed or whether the problem is in the lighting circuit it controls.
Related problems
- Burning plastic smell from electricsA burning plastic smell needs the affected electrical circuit checked before it is used again.
- Circuit breaker keeps trippingA repeated trip usually means a circuit, fitting or connected item needs testing.
- Circuit breaker will not resetA circuit breaker that stays off needs the affected circuit checked for a fault.
- Consumer unit is hotA hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- Consumer unit tripping with nothing plugged inA trip with nothing plugged in usually needs the fixed circuit traced and tested.
- Cooker tripping the electricsA cooker trip can come from its circuit, connection or the appliance itself.
Sources
- BS 7671: IET Wiring Regulations
- IET guidance and codes of practice
- Electrical Safety First safety guidance
Updated 19 November 2026
