Electric radiator won't turn off
An electric radiator that will not turn off has a control stuck on, usually the thermostat or a relay. TMB Electrics, based in Banstead, finds which part keeps the element powered and repairs it.
Calls answered 24/7
- 14 years trading
- Local to Banstead
- Clear, upfront quotes
Why won't my electric radiator turn off?
A radiator stays on when power keeps reaching its heating element, the part that turns electricity into heat, after the room is warm. Something that should break that supply has stopped doing so.
- A thermostat stuck closedA thermostat is a temperature switch that opens once the room is warm. If its contacts weld shut, the element heats whatever the dial says, and turning the dial down changes nothing.
- A relay or contactor stuck onA relay or contactor is a small electrically operated switch that carries the heating current. When its contacts stick, the element stays live after the controls have asked for off.
- A control board faultRadiators with a digital display switch the element through a control board. A failed output on that board can hold the element on while the display reads off.
- Wiring that bypasses the thermostatIf the element was connected straight to the supply during an earlier alteration, the thermostat has no say over it. The heater then only stops at the wall switch or the breaker.
- A faulty room sensorA room sensor that reports a cold room when it is warm keeps asking for heat. The radiator behaves as though it is working normally while the room gets hotter.
What can I check safely at home?
You can turn the controls down, switch off at the wall and unplug a portable model, all without opening a cover or touching any wiring.
- Turn the thermostat to its lowest markSet the dial to its lowest setting or to off and give the panel time to cool. A panel that stays hot points to a thermostat that is not cutting the element.
- Switch off the wall isolator or fused spurAn isolator is a switch that cuts the supply to one appliance, and a fused spur is a wall switch with a small fuse. Switch it off. If the panel cools, leave it off until it has been tested.
- Unplug a portable radiatorA portable model can be unplugged at the socket. Leave it unplugged, and do not fit a timer plug to hide the problem, because the fault stays in the heater.
- Note which radiators stay onOne radiator that stays on points to its own control. Several on the same circuit point to whatever feeds them. Keep every cover shut and leave the wiring alone.
When should I book an electrician?
Book when the radiator stays hot with the thermostat turned down and the wall switch off, or when anything about it smells of burning.
- Still hot with the wall switch offPower is still reaching the element. Switch the heating circuit off at its breaker handle on the consumer unit, leave every cover shut and use Book Now.
- A burning smell, buzzing or brown marksA joint may be overheating inside the radiator or the wall switch. Switch that circuit off at the breaker, keep clear of the fitting and use Book Now.
- A room that keeps getting hotterA room that heats up while the radiator keeps running needs the control tested before heat marks the wall or the furniture near it.
What happens on the visit?
The visit starts with what the radiator does and ends with the failed part named, and a written price for any bigger work.
- Symptoms firstWe ask which radiator stays on, what the thermostat and wall switch do when turned down, and when it began. Photos of the controls and the consumer unit help.
- Test the circuit in sectionsThe circuit is isolated and tested piece by piece, covering the thermostat, relay or board, wall switch and wiring, until the fault is pinned to one place.
- Fix or quoteSimple faults are repaired straight away. Bigger work gets a written price first. If the radiator itself has failed, we tell you and its replacement is priced separately.
- A plain account of what failedYou are told which part was feeding the element and why. A minor works certificate is issued when the repair alters the circuit and the work needs one.
What does the fault finding price cover?
Fault finding is charged by the hour for the diagnostic visit, and that time pays for testing the radiator circuit until the failed part is found. The repair is priced once the cause is known.
From £80 an hour
Included when agreed
- Testing the affected circuit and the fuse board
- Tracing the fault to the socket, fitting, cable or appliance
- Repairs that can be done on the spot with parts carried
- A clear explanation of what was wrong
Not included automatically
- New circuits or upgrades the fault reveals, which are quoted separately
- Repairs to the appliance itself
Ways to pay


- Pay by bank
- Bank transfer
- Parts and any permanent repair are quoted separately once the fault is found.
- Swapping a wall switch takes less time than tracing a fault along a long heater circuit, so time on site changes the price.
- A new circuit or fuse board work that the fault reveals is quoted separately.
How booking works
Tell us about the job
Tap Book Now and describe the work in the chat. Photos help.
Get your price
You see your price in the chat. A set price is paid at checkout; any other job is quoted first.
Choose your visit
Give your address and when you are free, and the visit is arranged.
Why choose TMB Electrics
- Reviews
- 39
- Rating
- 5.0
- Trading since
- 2012
“I keep things straightforward: you deal with me from the first quote to the final check, with clear advice and no surprises along the way.”
Trevor Bush, TMB Electrics
Book NowIs it safe to leave the radiator on until someone comes?
Switch it off at the wall switch or the breaker instead. Most radiators have a thermal cutout, but constant running wastes energy and can overheat a room, and the cause is still a fault that needs testing.
Will you fix it on the same visit?
Simple faults are repaired straight away. If the radiator itself has failed, we explain that and price the replacement separately before any work starts.
Why does the radiator only stop when I use the breaker?
That pattern means the element has a live supply that the controls do not break. It is usually a stuck thermostat or relay, or wiring that bypasses the thermostat, and testing names which.
How much does fault finding cost?
It is charged by the hour for the diagnostic visit, with the repair priced once the cause is known. Book Now and the written price is set out before any repair work begins.
Related problems
- Burning plastic smell from electricsA burning plastic smell needs the affected electrical circuit checked before it is used again.
- Circuit breaker keeps trippingA repeated trip usually means a circuit, fitting or connected item needs testing.
- Circuit breaker will not resetA circuit breaker that stays off needs the affected circuit checked for a fault.
- Consumer unit is hotA hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- Consumer unit tripping with nothing plugged inA trip with nothing plugged in usually needs the fixed circuit traced and tested.
- Cooker tripping the electricsA cooker trip can come from its circuit, connection or the appliance itself.
Sources
- Electrical Safety First: Safety Guidance
- Energy Saving Trust: Heating Your Home
- HSE: Electrical Safety at Work
Updated 20 November 2026
