Electric shock from shower
An electric shock from a shower needs immediate isolation. TMB Electrics traces the shower circuit and identifies the fault affecting the shower or its supply.
Calls answered 24/7
- 14 years trading
- Local to Banstead
- Clear, upfront quotes
Why am I getting an electric shock from the shower?
A shock or tingling sensation from a shower can happen when a fault affects the shower, its circuit or the electrical connections serving it.
- A fault inside the showerAn electric shower contains live electrical parts that heat the water. A fault inside the unit can allow current to reach parts that should not become live.
- A damaged shower circuitThe cable and connections feeding an electric shower carry a high load. Damage, overheating or a loose connection can create a fault on that circuit.
- A problem with earthing or bondingEarthing and bonding help keep exposed metal parts at a safe voltage. A fault in these protective connections can make a shock or tingling sensation more likely.
- Water has reached an electrical connectionWater entering a shower connection, isolator or electrical enclosure can create a fault. The affected circuit needs testing before the shower is used again.
What can I check safely after a shower shock?
Stop using the shower and keep everyone away from it. Do not remove covers, touch wiring or open the shower unit.
- Turn off the shower if it is safeUse the shower isolator or consumer unit only if it can be reached without touching wet surfaces or the shower. Leave the shower switched off after any shock.
- Check for visible damage without touchingLook for scorch marks, cracking, smoke or a burning smell around the shower, pull cord or isolator. Do not touch any damaged fitting.
- Note what happenedWrite down whether the shock happened when water was running, when the shower switched on, or when another electrical item was used. This helps focus the testing.
When should I book electrical fault finding for a shower shock?
Book electrical fault finding after any shock or tingling sensation from a shower. The shower must remain unused until the cause has been investigated.
- Someone felt a shock or tinglingAny shock from a shower, shower controls or nearby metalwork needs investigation. Do not treat a small sensation as normal.
- The shower circuit tripsA breaker or RCD that switches off when the shower runs points to a fault that needs testing. Leave the circuit off if it trips again.
- There is heat, smoke or a burning smellScorching, smoke, unusual heat or a burning smell around the shower circuit needs urgent attention. Keep the affected circuit switched off.
What happens when the shower circuit is tested?
The visit starts with the shower circuit and then checks the electrical path back to the consumer unit. Testing identifies where the fault is affecting the installation.
- The shower supply is isolatedThe shower circuit is identified and isolated before electrical testing begins. The shower, isolator and visible connections are checked for damage.
- The circuit and protection are testedTesting checks the shower circuit, cable, isolator and protective devices. The results show whether the fault is in the shower or fixed electrical installation.
- The fault is explainedThe failed part or remaining work is explained once testing identifies the cause. Any repair beyond the investigation is priced after the work needed is known.
What does the shower fault finding price cover?
The price covers the time needed to investigate the shower circuit and identify why a shock or tingling sensation occurred. It changes if testing finds a failed shower unit, damaged cable, faulty isolator, problem with earthing or bonding, or repair that needs replacement parts.
From £80 an hour
Included when agreed
- Testing the affected circuit and the fuse board
- Tracing the fault to the socket, fitting, cable or appliance
- Repairs that can be done on the spot with parts carried
- A clear explanation of what was wrong
Not included automatically
- New circuits or upgrades the fault reveals, which are quoted separately
- Repairs to the appliance itself
Ways to pay


- Pay by bank
- Bank transfer
- Testing covers the shower circuit, isolator, consumer unit protection and electrical connections linked to the fault.
- Replacement parts and repair work are priced after testing identifies what has failed.
- A fault inside the shower unit may need separate replacement or repair.
How booking works
Tell us about the job
Tap Book Now and describe the work in the chat. Photos help.
Get your price
You see your price in the chat. A set price is paid at checkout; any other job is quoted first.
Choose your visit
Give your address and when you are free, and the visit is arranged.
Why choose TMB Electrics
- Reviews
- 39
- Rating
- 5.0
- Trading since
- 2012
“I keep things straightforward: you deal with me from the first quote to the final check, with clear advice and no surprises along the way.”
Trevor Bush, TMB Electrics
Book NowWhat should I do if I get an electric shock from my shower?
Stop using the shower and keep it switched off. If anyone is injured, get medical help and do not touch them until the electrical supply is safely isolated.
Can a shower give a small electric shock?
No, a tingling sensation or small shock is not normal. The shower circuit and its protective connections need testing before the shower is used again.
Can I use the shower if the shock only happened once?
No, leave the shower off after any shock. A fault can remain present even when the sensation does not happen every time the shower runs.
Could the shower unit itself be causing the shock?
It could be, but the shower unit is not the only possible cause. Testing separates a fault inside the shower from a fault in its circuit, isolator or protective connections.
Related problems
- Burning plastic smell from electricsA burning plastic smell needs the affected electrical circuit checked before it is used again.
- Circuit breaker keeps trippingA repeated trip usually means a circuit, fitting or connected item needs testing.
- Circuit breaker will not resetA circuit breaker that stays off needs the affected circuit checked for a fault.
- Consumer unit is hotA hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- Consumer unit tripping with nothing plugged inA trip with nothing plugged in usually needs the fixed circuit traced and tested.
- Cooker tripping the electricsA cooker trip can come from its circuit, connection or the appliance itself.
Sources
- Electrical Safety First: electrical safety in the bathroom
- HSE: electrical injuries
- St John Ambulance: electric shock
Updated 19 November 2026
