Electric shock from tap or water

An electric shock from a tap or water needs urgent electrical investigation. TMB Electrics can isolate and test the affected installation in Banstead to find the fault and leave unsafe circuits off.

Calls answered 24/7

  • 14 years trading
  • Local to Banstead
  • Clear, upfront quotes

Why do I feel an electric shock from a tap or water?

A shock from a tap or water can happen when electrical current reaches metal pipework, a fitting or water through a fault in the installation or electricity supply.

  • A fault is leaking currentA damaged cable, loose connection or failed electrical fitting can allow current to travel where it should not. Metal taps and pipework can then become part of the path.
  • An appliance or fixed unit has failedA fault in an electrical appliance or fixed unit near water can create a dangerous condition. The appliance or unit needs testing without opening it.
  • The earthing or bonding needs checkingEarthing and bonding are connections that help carry fault current safely away. A fault affecting these connections can leave metal parts at a dangerous voltage.
  • There is a fault on the electricity networkA broken neutral connection on the local electricity network can put a dangerous voltage on metalwork. The electricity network operator needs to investigate this urgently.

What can I check safely after a shock from a tap?

Move away from the tap and avoid touching water, metal pipework and electrical items. Do not open any appliance, fitting, consumer unit or wiring.

  • Keep clear of the tap and waterStop using the tap, bath, shower or sink involved. Keep other people away from the area until the electrical danger has been checked.
  • Note what happenedWrite down where the shock happened, whether it was a tap, shower, bath or sink, and what electrical equipment was running at the time.
  • Look without touchingFrom a safe distance, note smoke, burning smells, scorch marks or damaged plugs. Do not touch metal fittings, wet surfaces or damaged electrical items.
  • Get medical help after an electric shockAnyone who has received an electric shock needs medical advice. Call emergency services if they are unconscious, have chest pain, burns or breathing problems.

When should I book electrical fault finding?

Book Now when anyone feels a shock from a tap, water or metal fitting. The affected electrical installation needs urgent testing even when the shock felt small.

  • Someone has felt a shockA shock from water, a tap or pipework can indicate a dangerous electrical fault. Stop using the affected area and arrange urgent investigation.
  • There is heat, smoke or a burning smellSmoke, scorching, unusual warmth or a burning smell near water or electrical equipment needs immediate attention. Leave the area unused.
  • The problem affects more than one fittingA shock from several taps, water outlets or metal fittings can point to a wider installation or supply problem that needs testing.
  • The electricity supply may be involvedCall 105 if the shock affects pipework or metalwork and you suspect an electricity network problem. The local network operator can check the incoming supply.

What happens when a tap shock is investigated?

The visit begins by making the affected area safe, then testing the installation and connected equipment to identify where the dangerous voltage is coming from.

  • The danger is isolatedThe affected circuit or equipment is switched off where needed so testing can begin without leaving the fault in use.
  • The electrical installation is testedTesting checks the consumer unit, earthing, bonding and relevant circuits to identify whether the fault is within the fixed installation.
  • Connected equipment is separatedTesting distinguishes the fixed wiring from appliances and fixed units connected near the affected water outlet.
  • The remaining work is explainedThe fault found and any work needed are explained after testing. Unsafe circuits remain off until the required repair is completed.

What does investigating an electric shock from water cover?

The price covers urgent investigation of the affected electrical installation, including isolation where needed and tests on the circuits, earthing and bonding linked to the shock. The price changes if testing identifies failed equipment, damaged wiring, a supply issue or repair work that needs replacement parts.

From £80 an hour

Included when agreed

  • Testing the affected circuit and the fuse board
  • Tracing the fault to the socket, fitting, cable or appliance
  • Repairs that can be done on the spot with parts carried
  • A clear explanation of what was wrong

Not included automatically

  • New circuits or upgrades the fault reveals, which are quoted separately
  • Repairs to the appliance itself

Ways to pay

  • Visa
  • Mastercard
  • American Express
  • Apple Pay
  • Google Pay
  • Pay by bank
  • Bank transfer
  • Testing focuses on the circuits, metalwork and electrical equipment linked to the reported shock.
  • Repairs and replacement parts are priced after testing identifies the cause.
  • A fault on the electricity network is reported to the local network operator for its investigation.

View the fault finding cost guide

How booking works

  1. Tell us about the job

    Tap Book Now and describe the work in the chat. Photos help.

  2. Get your price

    You see your price in the chat. A set price is paid at checkout; any other job is quoted first.

  3. Choose your visit

    Give your address and when you are free, and the visit is arranged.

Why choose TMB Electrics

Photo of Trevor BushTrevor BushElectrician
Reviews
39
Rating
5.0
Trading since
2012
“I keep things straightforward: you deal with me from the first quote to the final check, with clear advice and no surprises along the way.”

Trevor Bush, TMB Electrics

Book Now

Electric shock from tap or water questions

Still have a question?

Why do I get a shock from my kitchen tap?

A shock from a kitchen tap can mean electrical current is reaching the metal tap or connected pipework. Stop using the tap and arrange urgent electrical testing.

Can an electric shock from water be dangerous?

Yes, any electric shock around water needs treating as dangerous. Move away from the area and seek medical advice for the person affected.

Should I turn off the electricity after a shock from a tap?

Do not touch the consumer unit if reaching it means crossing a wet or affected area. If it is safely accessible and you know which circuit is involved, leave that circuit off.

Could the electricity network cause a shock from pipework?

Yes, a broken neutral connection on the electricity network can create dangerous voltages on metalwork. Call 105 so the local electricity network operator can investigate the supply.

Related problems

Sources

Updated 19 November 2026

Book or ask a question

Calls answered 24/7