Fridge freezer tripping the electrics
A fridge freezer that trips the electrics has a fault in the appliance, its plug or cable, or on the circuit it runs from. TMB Electrics tests the circuit and fittings in Banstead to find which.
Calls answered 24/7
- 14 years trading
- Local to Banstead
- Clear, upfront quotes
Why does my fridge freezer keep tripping the electrics?
The trip comes from a fault in the fridge freezer, its plug and cable, or the circuit behind the socket. Each leaves a different pattern.
- A fault inside the fridge freezerCurrent leaking to earth inside the appliance makes the RCD, the safety switch in the consumer unit, cut the power. The trip follows the fridge freezer if you plug it into another socket.
- A damaged cable or plugA crushed, trapped or worn mains cable, or loose wires at the plug, can leak current. Burn or scorch marks on the plug or socket point to arcing or overheating.
- An overloaded extension leadA large appliance can overload an extension lead and overheat it. A fridge freezer belongs close to a wall socket, on a UK three pin plug with a fuse.
- Damp where the appliance standsA fridge freezer in a garage or outbuilding can meet damp and condensation. Moisture around the plug, socket or cable lets current leak and trips the protection.
- A fault elsewhere on the circuitIf the trip carries on with the fridge freezer unplugged, something else on that circuit is leaking, or the RCD or RCBO itself has become the weak point.
What can I check safely at home?
You can unplug, look and reset. Leave the back panel, the socket faceplate and the consumer unit cover shut, because opening them is a job for a trained person.
- Protect the food firstMove food to a working freezer or a cool box with ice packs if you can. Keep the doors shut on anything left behind so the cold stays in.
- Unplug and look from outsidePull the plug and check the plug, cable and socket for burn marks, cuts, crushing or loose wires. Make sure the cable is not trapped under the appliance.
- Reset with nothing plugged inSwitch the tripped breaker back on with the fridge freezer unplugged. If it trips again with nothing connected, the fault is on the circuit rather than the appliance.
- Try a socket on another circuitIf the breaker holds, plug the fridge freezer straight into a socket on a different circuit and see if the trip follows it. Never use an extension lead for this.
When should I book an electrician?
Book an electrician when the trip carries on with the fridge freezer unplugged, or when any heat damage shows. Book Now to arrange the testing.
- It trips with nothing plugged inA breaker or RCD that drops out with the fridge freezer unplugged means the circuit needs testing. Holding the RCD on or bypassing it leaves the fault in place.
- The plug or socket is marked by heatScorching, melting or a burning smell means unplug the appliance and leave that circuit off. Book the same day, because heat damage left in use can start a fire.
- It trips on every socket you tryA trip that repeats wherever the fridge freezer goes can point to the appliance, but it can also be the protective device. A test settles which before anything is replaced.
- The trip follows only the applianceIf the fridge freezer trips every socket and the circuit is sound, the manufacturer or a repair engineer deals with the appliance. Keep it unplugged until then.
What happens on the visit?
The visit separates the appliance from the circuit, then looks at every fitting between the consumer unit and the plug.
- The circuit is tested on its ownWith the fridge freezer unplugged, the circuit is isolated and tested for earth leakage. That shows whether the trip comes from the wiring side.
- Socket, plug and cable are inspectedThe socket, the plug and the visible cable are checked for heat damage. Damaged fittings are replaced where the parts are on hand.
- The appliance is tested if the trip follows itA portable appliance test checks the fridge freezer's insulation and earth. It shows whether the fault sits inside the appliance.
- The protective device is checked and the result explainedThe RCD or RCBO on that circuit is checked and replaced if it is the weak point. You then hear what was found and what happens next with the food and the appliance.
How is fridge freezer fault finding priced?
Fault finding is charged by the hour. The price covers the time spent isolating the circuit, testing it and inspecting the socket, plug and cable. It changes with how long the search takes and with any parts a repair needs.
From £80 an hour
Included when agreed
- Testing the affected circuit and the fuse board
- Tracing the fault to the socket, fitting, cable or appliance
- Repairs that can be done on the spot with parts carried
- A clear explanation of what was wrong
Not included automatically
- New circuits or upgrades the fault reveals, which are quoted separately
- Repairs to the appliance itself
Ways to pay


- Pay by bank
- Bank transfer
- Replacement sockets, plugs or protective devices are added once the cause is found.
- Repairs to the fridge freezer itself sit with the manufacturer or a repair engineer, and any new circuit the testing calls for is quoted separately.
How booking works
Tell us about the job
Tap Book Now and describe the work in the chat. Photos help.
Get your price
You see your price in the chat. A set price is paid at checkout; any other job is quoted first.
Choose your visit
Give your address and when you are free, and the visit is arranged.
Why choose TMB Electrics
- Reviews
- 39
- Rating
- 5.0
- Trading since
- 2012
“I keep things straightforward: you deal with me from the first quote to the final check, with clear advice and no surprises along the way.”
Trevor Bush, TMB Electrics
Book NowIs it safe to reset the RCD and carry on?
Once, to test, yes. An RCD trip is a sign of a fault, so find the cause before relying on the circuit again. Never bypass the RCD or hold it on.
Can I use an extension lead for my fridge freezer?
No. A large appliance can overload an extension lead and overheat it. Plug the fridge freezer straight into a wall socket close to where it stands.
Can the fault be fixed on the same visit?
Often, when the fault is a socket, plug or protective device, because common parts such as sockets, breakers and RCDs are carried. A fault inside the fridge freezer goes to the manufacturer or a repair engineer.
Will you repair my fridge freezer?
No. The visit finds whether the circuit or its fittings are at fault. If the trip follows the appliance, TMB Electrics tells you so and you contact the manufacturer or a repair engineer.
Related problems
- Burning plastic smell from electricsA burning plastic smell needs the affected electrical circuit checked before it is used again.
- Circuit breaker keeps trippingA repeated trip usually means a circuit, fitting or connected item needs testing.
- Circuit breaker will not resetA circuit breaker that stays off needs the affected circuit checked for a fault.
- Consumer unit is hotA hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- Consumer unit tripping with nothing plugged inA trip with nothing plugged in usually needs the fixed circuit traced and tested.
- Cooker tripping the electricsA cooker trip can come from its circuit, connection or the appliance itself.
Sources
- Electrical Safety First: fridges and freezers
- Electrical Safety First: your questions answered
- HSE: work using electrically powered equipment
Updated 20 November 2026
