Light bulbs keep blowing

Light bulbs keep blowing when the lamp does not suit the fitting, the dimmer or the heat around it. TMB Electrics tests the fitting and circuit in Banstead to find which one it is.

Calls answered 24/7

  • 14 years trading
  • Local to Banstead
  • Clear, upfront quotes

Why do my light bulbs keep blowing?

The pattern shows where to look. One fitting points to that fitting, one room points to its circuit, and every room points to something shared by the whole house.

  • A lamp stronger than the fitting allowsEvery fitting carries a maximum wattage marking. A lamp above it runs hot, which shortens the bulb's life and cooks the lampholder, the socket the bulb pushes into.
  • The wrong lamp type in a downlightSome downlights take only aluminium reflector lamps. A dichroic lamp, which throws a cool beam from a thin glass reflector, sends its heat backwards into the fitting and fails early.
  • An LED lamp on a dimmerAn LED lamp not marked as dimmable can flicker, buzz and die early on a dimmer. Even a dimmable one can fail when the dimmer is old or built for a different load.
  • Heat trapped above the ceilingDownlights covered by loft insulation cannot shed their heat. The lamp and the fitting overheat together unless the fitting is rated to sit under insulation.
  • A damaged lampholderA holder that has scorched, corroded or discoloured makes poor contact. Each new bulb then overheats at that contact and fails the same way as the last one.

What can I check safely at home?

These checks need no tools, no covers off and no contact with wiring. Switch the light off and let the bulb cool before you start.

  • Read the markingsFind the maximum wattage and lamp type printed on the fitting, then compare them with the bulb packaging. Fit only a lamp that matches both.
  • Check the bulb suits the dimmerIf the light is on a dimmer, look for a statement on the packaging that the bulb can be dimmed. Leave the dimmer plate on and do not open it.
  • Look at the holder and ceilingLook for brown marks, melting or a burnt smell around the holder and the ceiling beside it. If you see any, leave the fitting off and do not fit another bulb.
  • Note the patternWrite down whether one fitting, one room or every room is affected, and how long each bulb lasted. Photos of the fitting and any dimmer help the booking.

When should I book an electrician?

Book when the bulbs keep failing after you have matched the markings, or as soon as any fitting shows signs of heat.

  • Heat marks on the holder or ceilingScorching, curled labels or a melted holder mean heat has damaged the fitting. Book the same day if there is a burning smell.
  • Correct bulbs still failA bulb of the right type and wattage that still fails points to the fitting or its circuit, and that needs testing.
  • Failures began after new workBulbs that started failing once a dimmer or new fittings went in suggest a mismatch that testing can pin down.
  • Downlights sit under insulationRecessed fittings buried in loft insulation need checking for a fire rating, however long the bulbs last.

What happens on the visit?

The visit starts with what has been failing and ends with the cause explained in plain words.

  • Symptoms firstWhich fittings fail, how often and since when. Photos of the ceiling, the fitting and any dimmer give the visit a head start.
  • Inspect and testThe circuit is isolated, then the lampholder, fitting, dimmer and connections are inspected and tested until the cause is pinned to one place.
  • Fix or quoteSimple repairs are made on the spot with parts carried. Bigger work gets a written price before it starts.

How is fault finding priced?

Fault finding is charged by the hour for the diagnostic visit, which covers testing the fitting, any dimmer and the circuit until the cause is found. The repair is priced once the cause is known, so the price changes with what the testing finds.

From £80 an hour

Included when agreed

  • Testing the affected circuit and the fuse board
  • Tracing the fault to the socket, fitting, cable or appliance
  • Repairs that can be done on the spot with parts carried
  • A clear explanation of what was wrong

Not included automatically

  • New circuits or upgrades the fault reveals, which are quoted separately
  • Repairs to the appliance itself

Ways to pay

  • Visa
  • Mastercard
  • American Express
  • Apple Pay
  • Google Pay
  • Pay by bank
  • Bank transfer
  • Replacement lampholders, fittings and other parts are quoted separately once the fault is found.
  • Work the testing reveals, such as a new lighting circuit, is priced on its own.

View the fault finding cost guide

How booking works

  1. Tell us about the job

    Tap Book Now and describe the work in the chat. Photos help.

  2. Get your price

    You see your price in the chat. A set price is paid at checkout; any other job is quoted first.

  3. Choose your visit

    Give your address and when you are free, and the visit is arranged.

Why choose TMB Electrics

Photo of Trevor BushTrevor BushElectrician
Reviews
39
Rating
5.0
Trading since
2012
“I keep things straightforward: you deal with me from the first quote to the final check, with clear advice and no surprises along the way.”

Trevor Bush, TMB Electrics

Book Now

Light bulbs keep blowing questions

Still have a question?

Why do the bulbs in one light keep blowing?

Check that fitting first. A bulb above the marked wattage, the wrong lamp type or a heat damaged lampholder can each kill bulbs one after another. If every marking matches, the fitting needs testing.

Can any LED bulb go in my downlight?

No. The lamp has to suit the fitting and its driver, the small box that powers it, and must not exceed the rating. Compare the packaging with the markings on the fitting.

Can a dimmer switch make bulbs blow?

Yes, if the bulb is not marked as dimmable or the dimmer does not suit LED lamps. The packaging states whether a lamp can be dimmed.

Is it safe to keep replacing the bulb?

Only while the holder is clean and undamaged. If it is scorched, corroded or discoloured, do not fit another bulb, and book fault finding with TMB Electrics.

Can the fault be fixed on the same visit?

Simple repairs are often done on the visit, because TMB Electrics carries common parts. Anything bigger is priced in writing before work begins.

Related problems

Sources

Updated 20 November 2026

Book or ask a question

Calls answered 24/7