Light will not turn off
A light that stays on can have a failed switch, dimmer or connection. TMB Electrics traces the lighting circuit and identifies the part that needs attention.
Calls answered 24/7
- 14 years trading
- Local to Banstead
- Clear, upfront quotes
Why will a light not turn off?
A light can remain on when the switch, dimmer, fitting or a connection on the lighting circuit has failed.
- The switch has failedA worn switch can leave the circuit connected when it should turn the light off. Testing checks whether the switch is passing power when it is in the off position.
- The dimmer is not switching offA dimmer can fail inside and leave an LED lamp glowing or fully lit. The dimmer and the lamp type are checked before a replacement is fitted.
- The light fitting has a faultA fault inside a light fitting can keep the lamp supplied with power. Testing separates a fitting fault from a problem at the switch or elsewhere on the circuit.
- A connection is feeding the lightA loose or incorrect connection can keep a light live when the switch is off. Testing traces the lighting circuit to find where the unwanted supply is reaching the fitting.
What can I check safely when a light stays on?
You can check the switch position and note which lights are affected without opening a fitting or touching any wiring.
- Check whether one light is affectedSee whether the problem affects one fitting, one room or several lights. Note whether other lights controlled by the same switch behave normally.
- Try the switch onceTurn the switch off and on once to confirm the light stays on. Do not remove the switch plate or touch any part behind it.
- Look for visible damageDo not use a switch or fitting with scorch marks, smoke, cracking, unusual warmth or a burning smell. Leave the light on only if it cannot be switched off safely.
When should I book fault finding for a light that stays on?
Book Now when the light remains on, the switch feels loose or damaged, or more than one light behaves unexpectedly.
- The light stays on at the switchA light that remains on after the switch is turned off needs testing. The fault may be in the switch, dimmer, fitting or circuit connection.
- The switch or dimmer is damagedA cracked plate, loose switch, buzzing dimmer or hot control needs checking before the circuit is used normally again.
- There are signs of overheatingSmoke, scorching, a burning smell or unusual heat at the switch or fitting needs urgent attention. Stop using the affected circuit where that can be done safely.
What happens when a light will not turn off?
The visit starts by identifying the lighting circuit, then tests the switch and fitting until the unwanted supply is found.
- The lighting circuit is identifiedThe consumer unit, switch and fitting are checked to establish which circuit supplies the light that remains on.
- The switch and fitting are testedThe circuit is isolated and tested through the switch, dimmer and fitting to find whether the fault is at one part or a connection on the circuit.
- The repair is explainedThe failed part and required repair are explained once testing identifies the cause. Replacement work is priced after the cause is known.
What does fault finding for a light that stays on cover?
The price covers the time needed to test the lighting circuit and identify why the light remains on. The price changes if testing finds a failed switch, dimmer, fitting, cable connection or repair that needs replacement parts.
From £80 an hour
Included when agreed
- Testing the affected circuit and the fuse board
- Tracing the fault to the socket, fitting, cable or appliance
- Repairs that can be done on the spot with parts carried
- A clear explanation of what was wrong
Not included automatically
- New circuits or upgrades the fault reveals, which are quoted separately
- Repairs to the appliance itself
Ways to pay


- Pay by bank
- Bank transfer
- Testing covers the affected lighting circuit, switch, dimmer and fitting linked to the fault.
- Replacement parts and repair work are priced once the cause is known.
How booking works
Tell us about the job
Tap Book Now and describe the work in the chat. Photos help.
Get your price
You see your price in the chat. A set price is paid at checkout; any other job is quoted first.
Choose your visit
Give your address and when you are free, and the visit is arranged.
Why choose TMB Electrics
- Reviews
- 39
- Rating
- 5.0
- Trading since
- 2012
“I keep things straightforward: you deal with me from the first quote to the final check, with clear advice and no surprises along the way.”
Trevor Bush, TMB Electrics
Book NowWhy does my light stay on when the switch is off?
A failed switch, dimmer, fitting or circuit connection can leave the light supplied with power. Testing identifies whether the fault is at the control, the fitting or another point on the lighting circuit.
Can a dimmer make an LED light stay on?
Yes, a failed or unsuitable dimmer can leave an LED lamp glowing or lit after it is switched off. Testing checks the dimmer and fitting before any replacement is fitted.
Is it safe to leave a light on if it will not switch off?
A light that stays on needs checking, especially if the switch or fitting is warm, damaged or making a noise. Do not touch wiring or remove the fitting. Stop using the affected circuit where that can be done safely.
Will the whole house lose power while the light is checked?
The lighting circuit being tested is isolated while work is carried out. Other circuits can remain on when they are separate from the affected lighting circuit.
Related problems
- Burning plastic smell from electricsA burning plastic smell needs the affected electrical circuit checked before it is used again.
- Circuit breaker keeps trippingA repeated trip usually means a circuit, fitting or connected item needs testing.
- Circuit breaker will not resetA circuit breaker that stays off needs the affected circuit checked for a fault.
- Consumer unit is hotA hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- Consumer unit tripping with nothing plugged inA trip with nothing plugged in usually needs the fixed circuit traced and tested.
- Cooker tripping the electricsA cooker trip can come from its circuit, connection or the appliance itself.
Sources
- Electrical Safety First: Your questions answered
- GOV.UK: Approved Document P, Electrical safety in dwellings
- IET: BS 7671 Wiring Regulations
Updated 19 November 2026
