Lighting circuit keeps tripping

A lighting circuit that keeps tripping needs testing before it is used again. TMB Electrics traces the affected lighting circuit in Banstead and identifies the fault causing the trip.

Calls answered 24/7

  • 14 years trading
  • Local to Banstead
  • Clear, upfront quotes

Why does a lighting circuit keep tripping?

A lighting circuit can trip when a fitting, switch, cable or connected control develops a fault. The protective device turns the circuit off when it detects that fault.

  • A light fitting has failedA damaged lamp holder, ceiling fitting or downlight can cause the lighting circuit to trip. Heat damage around a fitting needs testing before the circuit is switched back on.
  • A switch or dimmer has a faultA worn switch or dimmer can develop a fault when it operates the light. Testing separates a failed control from a fault elsewhere on the lighting circuit.
  • A connection has become looseA loose connection can overheat or interrupt the circuit. The fault may be at a light fitting, switch or another connection on the lighting cable.
  • A cable has been damagedDamage to a lighting cable can trip the breaker or RCD, which is a safety switch that turns power off when it detects a fault. Testing identifies the affected section.

What can I check safely before booking?

You can check the pattern of the fault without opening fittings, removing covers or touching mains wiring. Leave anything damaged or hot alone.

  • Check which lights are affectedNote whether one light, one room or several rooms lose power. Check whether sockets still work in the same rooms.
  • Try a suitable replacement lampSwitch the light off before fitting a known working lamp of the correct type. Do not force a lamp into a damaged holder.
  • Look for visible heat damageDo not use a switch or light fitting with scorch marks, cracking, smoke, a burning smell or unusual warmth.

When should I Book Now?

Book electrical fault finding when the lighting circuit trips again, lights remain off after a lamp change, or any fitting shows damage.

  • The breaker will not stay onA breaker or RCD that trips again needs testing. Leave the lighting circuit off rather than repeatedly switching it back on.
  • Several lights have failedSeveral failed lights can point to a shared connection or cable fault. Testing finds where power stops on the circuit.
  • A fitting smells hot or looks burntA burning smell, smoke, scorching or a hot fitting needs urgent attention. Stop using the affected lighting circuit.

What happens when a lighting circuit trips?

The visit starts with the consumer unit and the lights that trip the circuit. Testing then narrows the fault to the affected part.

  • The lighting circuit is identifiedThe consumer unit, switches and affected lights are checked to establish which protective device supplies the circuit.
  • The circuit is tested in sectionsTesting narrows the fault through the lighting cable, switches and fittings until the failed part or section is identified.
  • The fault is explainedThe cause is explained once testing identifies it. Any repair beyond the investigation is priced after the required work is known.

What does lighting fault finding cover?

The price covers time spent investigating the lighting circuit and identifying why it trips. The price changes when testing finds a failed switch, fitting, cable connection or repair that needs replacement parts.

From £80 an hour

Included when agreed

  • Testing the affected circuit and the fuse board
  • Tracing the fault to the socket, fitting, cable or appliance
  • Repairs that can be done on the spot with parts carried
  • A clear explanation of what was wrong

Not included automatically

  • New circuits or upgrades the fault reveals, which are quoted separately
  • Repairs to the appliance itself

Ways to pay

  • Visa
  • Mastercard
  • American Express
  • Apple Pay
  • Google Pay
  • Pay by bank
  • Bank transfer
  • Testing covers the affected lighting circuit, switches and fittings linked to the trip.
  • Replacement parts and repair work are priced once the cause is known.

View the fault finding cost guide

How booking works

  1. Tell us about the job

    Tap Book Now and describe the work in the chat. Photos help.

  2. Get your price

    You see your price in the chat. A set price is paid at checkout; any other job is quoted first.

  3. Choose your visit

    Give your address and when you are free, and the visit is arranged.

Why choose TMB Electrics

Photo of Trevor BushTrevor BushElectrician
Reviews
39
Rating
5.0
Trading since
2012
“I keep things straightforward: you deal with me from the first quote to the final check, with clear advice and no surprises along the way.”

Trevor Bush, TMB Electrics

Book Now

Lighting circuit tripping questions

Still have a question?

Why does my lighting circuit trip when I switch a light on?

The switch, light fitting, lamp holder or wiring connection may have a fault. Testing identifies whether the fault occurs at that light or elsewhere on the lighting circuit.

Can a faulty light fitting trip the whole lighting circuit?

Yes. A fault in one fitting can trip the protective device that supplies the lighting circuit. The other lights on that circuit may then stop working too.

Should I keep resetting the lighting breaker?

No. Leave the lighting circuit off if it trips again. Repeated resetting can leave a fault connected to the installation.

Can a dimmer switch make lights trip?

Yes. A dimmer can develop a fault or be unsuitable for the lamps connected to it. Testing checks the dimmer, lamps and lighting circuit before repair work is identified.

Related problems

Sources

Updated 19 November 2026

Book or ask a question

Calls answered 24/7