Electrical damage after lightning strike
After lightning hits a house, TMB Electrics tests the affected installation in Banstead and identifies damaged circuits, fittings or protection before repair work is priced.
Calls answered 24/7
- 14 years trading
- Local to Banstead
- Clear, upfront quotes
Why can lightning damage house electrics?
Lightning can send a sudden voltage surge through a property supply, an outside cable or connected equipment. A surge is a brief rise in voltage that can damage electrical parts.
- A surge reaches the electrical installationA nearby or direct strike can create a surge that reaches the consumer unit, circuits and fixed electrical fittings. Damage may affect one circuit or more than one part of the installation.
- Outside circuits can be affectedGarden lighting, outdoor sockets, garage supplies and other external equipment can be affected when lightning strikes near the property or its supply cables.
- A protective device has operatedA circuit breaker or RCD may switch off when it detects a fault after a surge. An RCD is a safety switch that cuts power when electricity flows where it should not.
- A connection or fitting has failedA surge can damage a socket, switch, light fitting, cable connection or protective device. Testing identifies whether the fixed installation has been affected.
What can I check safely after lightning hits my house?
You can check what has changed without opening appliances, removing covers or touching mains wiring. Keep electrical fittings and the consumer unit closed.
- Check which power has stoppedNote whether the loss affects lights, sockets, fixed equipment or the whole property. Check whether the consumer unit has a switch in the off position without removing its cover.
- Unplug plug in equipmentUnplug chargers, extension leads and appliances from affected sockets. Leave any item with a burning smell, cracking, heat marks or visible damage disconnected.
- Look for visible damageLook without touching for smoke, scorching, cracked sockets, damaged switches or burnt light fittings. Do not use a fitting that looks damaged or feels unusually warm.
- Write down what happenedNote when the lightning strike happened, what lost power and whether any breaker or RCD switched off. This helps identify the circuit that needs testing.
When should I book electrical fault finding after lightning?
Book Now when lightning has left power off, caused repeated tripping or damaged an electrical fitting. Electrical fault finding identifies what must stay isolated and what needs repair.
- A breaker or RCD will not stay onA breaker or RCD that switches off again can indicate damage on a circuit or connected item. Leave the affected circuit off rather than repeatedly restoring power.
- Power has not returned to part of the houseDead lights, sockets or fixed equipment after a lightning strike need testing to establish whether the fault is at a fitting, cable, connection or protective device.
- There is smoke, heat or scorchingSmoke, a burning smell, scorch marks or a hot fitting means the affected circuit should not be used. Emergency call out and make safe can isolate the immediate danger.
What happens when lightning damage is checked?
The visit follows the affected installation from the consumer unit to the circuits and fittings that changed after the strike. Testing establishes the damage before repair work is set out.
- The affected circuits are identifiedThe consumer unit is checked against the rooms, fittings and equipment affected by the strike. This identifies which circuits need closer testing.
- The installation is testedTesting checks protective devices, circuits, sockets, switches and lights to narrow the fault to the damaged part of the fixed installation.
- Unsafe parts are isolatedA circuit or fitting that cannot be used safely is left isolated. Other circuits can remain on where testing shows they are safe to use.
- The repair work is explainedThe damaged part and the work needed are explained once testing identifies the cause. Repairs are priced after the required parts and work are known.
What does lightning damage fault finding cover?
The price covers time spent investigating the electrical damage linked to the lightning strike, identifying affected circuits and testing the consumer unit, fittings and wiring involved. The price changes when testing finds damaged protective devices, sockets, switches, cables, light fittings or work that needs replacement parts.
From £80 an hour
Included when agreed
- Testing the affected circuit and the fuse board
- Tracing the fault to the socket, fitting, cable or appliance
- Repairs that can be done on the spot with parts carried
- A clear explanation of what was wrong
Not included automatically
- New circuits or upgrades the fault reveals, which are quoted separately
- Repairs to the appliance itself
Ways to pay


- Pay by bank
- Bank transfer
- Testing covers the affected electrical circuits and fixed fittings linked to the lightning damage.
- Replacement parts and repair work are priced after testing identifies what has been damaged.
- Damage inside a plug in appliance may need separate repair or replacement.
How booking works
Tell us about the job
Tap Book Now and describe the work in the chat. Photos help.
Get your price
You see your price in the chat. A set price is paid at checkout; any other job is quoted first.
Choose your visit
Give your address and when you are free, and the visit is arranged.
Why choose TMB Electrics
- Reviews
- 39
- Rating
- 5.0
- Trading since
- 2012
“I keep things straightforward: you deal with me from the first quote to the final check, with clear advice and no surprises along the way.”
Trevor Bush, TMB Electrics
Book NowCan lightning damage my house electrics without a direct hit?
Yes. Lightning nearby can create a surge that reaches the electrical installation through the supply or connected outside equipment. Testing identifies whether the consumer unit, circuits or fixed fittings have been affected.
Should I reset a breaker after lightning?
You can check whether a breaker or RCD has switched off, but do not keep resetting it if it switches off again. Leave the affected circuit off and book testing to find what is causing the fault.
Can lightning damage one circuit but not the whole house?
Yes. A surge can affect one circuit, one fitting or one protective device while other circuits remain on. Testing identifies what is affected instead of treating every working circuit as damaged.
What should I do if an electrical fitting smells burnt after lightning?
Stop using the fitting and leave its circuit off if it is already off. Smoke, scorching, unusual heat or a burning smell needs urgent attention so the affected circuit can be checked and made safe.
Related problems
- Burning plastic smell from electricsA burning plastic smell needs the affected electrical circuit checked before it is used again.
- Circuit breaker keeps trippingA repeated trip usually means a circuit, fitting or connected item needs testing.
- Circuit breaker will not resetA circuit breaker that stays off needs the affected circuit checked for a fault.
- Consumer unit is hotA hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- Consumer unit tripping with nothing plugged inA trip with nothing plugged in usually needs the fixed circuit traced and tested.
- Cooker tripping the electricsA cooker trip can come from its circuit, connection or the appliance itself.
Sources
- HSE: Electrical safety at work
- Electrical Safety First: Safety guidance
- BS 7671: IET Wiring Regulations
Updated 19 November 2026
