Lights not working but sockets are fine

Lights can fail while sockets work when the lighting circuit, switch, fitting or connection has a fault. TMB Electrics traces the lighting circuit in Banstead and identifies where power stops.

Calls answered 24/7

  • 14 years trading
  • Local to Banstead
  • Clear, upfront quotes

Why do lights stop working while sockets still work?

Lights and sockets usually run on separate circuits, so a fault affecting the lighting circuit can leave sockets working normally.

  • The lighting breaker has switched offA circuit breaker is the switch in the consumer unit that cuts power when it detects a fault. The lighting circuit can be off while the socket circuit stays on.
  • A light fitting has failedA failed light fitting, lamp holder or connection can interrupt power on the lighting circuit. Damage or overheating around a fitting needs testing before it is used again.
  • A switch or dimmer has failedA worn switch or dimmer can stop a light from working even when the circuit remains live. Testing separates a failed control from a problem elsewhere on the circuit.
  • A connection on the circuit has failedA loose or damaged connection can stop power reaching one or more lights. The fault may be at a fitting, switch or cable connection.

What can I check safely before booking?

You can check which lights have failed and remove plug in lamps without opening fittings or touching electrical wiring.

  • Check which lights are affectedSee whether one light, one room or several rooms are affected. Check whether the socket circuit still works in the same room.
  • Try a known working lampIf a removable lamp has failed, switch the light off and fit a known working lamp of the correct type. Do not force a lamp into a damaged holder.
  • Look for visible heat damageDo not use a switch or fitting with a burning smell, scorch marks, cracking, smoke or unusual warmth. Leave the light off and book an electrician.

When should I book electrical fault finding?

Book electrical fault finding when replacing a lamp does not restore the light, more than one light has failed, or any fitting shows damage.

  • The lighting breaker will not stay onA breaker that switches off again needs testing. Leave it off rather than repeatedly restoring power.
  • Several lights have stopped workingSeveral failed lights can mean a fault at a shared connection or on part of the lighting circuit. Testing identifies where the supply stops.
  • A switch or fitting is damagedA loose switch, burnt fitting or damaged ceiling rose needs investigation before the circuit is used again.

What happens when lights fail but sockets work?

The visit starts with the lights that have failed, then follows the lighting circuit through tests until the fault is identified.

  • The lighting circuit is identifiedThe consumer unit, switches and failed lights are checked to establish which circuit supplies them.
  • The circuit is tested in sectionsTesting narrows the fault through the circuit, switches and fittings until the failed part or section is found.
  • The cause is explainedThe failed part and any repair needed are explained once testing identifies the cause.

What does lighting fault finding cover?

The price covers time spent investigating the lighting circuit and identifying why the lights have stopped working while sockets remain on. The price changes if testing finds a failed switch, light fitting, cable connection, replacement part or repair beyond the investigation.

From £80 an hour

Included when agreed

  • Testing the affected circuit and the fuse board
  • Tracing the fault to the socket, fitting, cable or appliance
  • Repairs that can be done on the spot with parts carried
  • A clear explanation of what was wrong

Not included automatically

  • New circuits or upgrades the fault reveals, which are quoted separately
  • Repairs to the appliance itself

Ways to pay

  • Visa
  • Mastercard
  • American Express
  • Apple Pay
  • Google Pay
  • Pay by bank
  • Bank transfer
  • Testing covers the affected lighting circuit, switches and fittings linked to the loss of light.
  • Replacement parts and repair work are priced once the cause is known.

View the fault finding cost guide

How booking works

  1. Tell us about the job

    Tap Book Now and describe the work in the chat. Photos help.

  2. Get your price

    You see your price in the chat. A set price is paid at checkout; any other job is quoted first.

  3. Choose your visit

    Give your address and when you are free, and the visit is arranged.

Why choose TMB Electrics

Photo of Trevor BushTrevor BushElectrician
Reviews
39
Rating
5.0
Trading since
2012
“I keep things straightforward: you deal with me from the first quote to the final check, with clear advice and no surprises along the way.”

Trevor Bush, TMB Electrics

Book Now

Lights not working but sockets are fine questions

Still have a question?

Why do my lights not work but my sockets do?

Lights and sockets are commonly supplied by separate circuits. A fault on the lighting circuit can leave sockets working while lights, switches or fittings have no power.

Can a faulty light switch stop all the lights working?

A faulty switch can stop the light it controls from working. If several lights have failed, testing checks the shared lighting circuit and connections as well as each switch.

Should I keep resetting the lighting breaker?

No, do not keep resetting a breaker that switches off again. Leave the lighting circuit off and book testing to find the cause.

Related problems

Sources

Updated 19 November 2026

Book or ask a question

Calls answered 24/7