Why lights pulse on and off
Lights that pulse often have a fault in the fitting, control or lighting circuit. TMB Electrics traces the cause in Banstead and identifies the work needed to stop the pulsing.
Calls answered 24/7
- 14 years trading
- Local to Banstead
- Clear, upfront quotes
Why do lights pulse on and off?
Pulsing usually starts at the lamp, dimmer, fitting or a connection on the lighting circuit. Testing separates a single faulty fitting from a fault affecting more of the installation.
- A lamp does not suit the dimmerSome LED lamps pulse when fitted to a dimmer that does not match their load. The pulsing may change when the dimmer setting moves or when the lamp warms up.
- A dimmer or switch is failingA failing dimmer can interrupt the supply to a light even when the lamp is sound. A switch fault can also affect the fitting it controls.
- A connection has become looseA loose connection at a fitting, switch or elsewhere on the lighting circuit can make a light pulse. Loose electrical connections can generate heat and need testing.
- The lighting circuit has a faultSeveral pulsing lights can point to a fault shared by part of the lighting circuit. Testing finds whether the problem sits at one fitting, one control or the circuit itself.
What can I check safely when lights pulse?
You can note the pattern and inspect visible parts without opening a fitting, removing a switch plate or touching mains wiring.
- Check which lights pulseNote whether one light, one room or several rooms are affected. See whether the pulsing starts when another light or appliance is switched on.
- Try a matching removable lampWith the light switched off, fit a known working removable lamp of the correct type if the holder is undamaged. Do not force a lamp into a damaged holder.
- Look for heat damageDo not use a fitting or switch with scorch marks, cracking, smoke, unusual warmth or a burning smell. Leave that light switched off.
When should I book for pulsing lights?
Book Now when a light continues to pulse after a suitable lamp is fitted, when more than one light is affected, or when there are signs of heat damage.
- The pulsing continues with another lampA light that still pulses with a suitable working lamp needs the fitting, switch and circuit tested. The cause may be outside the lamp itself.
- More than one light is affectedPulsing across several lights can indicate a shared connection or circuit fault. Testing identifies which parts of the installation are involved.
- A fitting or switch shows damageScorching, smoke, a burning smell or unusual warmth needs urgent electrical attention. Keep the affected light switched off.
What happens when lights are pulsing?
The visit starts with the affected lights and controls, then follows the lighting circuit through tests until the cause is identified.
- The pulsing pattern is checkedThe affected lights, lamps, switches and dimmers are checked against the rooms where the problem appears. This establishes whether one fitting or several points are involved.
- The lighting circuit is isolated and testedThe relevant circuit is switched off for testing of the fittings and controls. Tests narrow the fault to the lamp, dimmer, switch, connection or circuit section.
- The cause and repair are explainedThe failed part or remaining investigation is explained once testing identifies it. Repair work is priced after the required work and parts are known.
What does pulsing light fault finding cover?
The price covers the diagnostic visit to investigate the lights, their controls and the affected lighting circuit. The price changes when testing finds a failed lamp, dimmer, switch, fitting, cable connection or repair that needs replacement parts.
From £80 an hour
Included when agreed
- Testing the affected circuit and the fuse board
- Tracing the fault to the socket, fitting, cable or appliance
- Repairs that can be done on the spot with parts carried
- A clear explanation of what was wrong
Not included automatically
- New circuits or upgrades the fault reveals, which are quoted separately
- Repairs to the appliance itself
Ways to pay


- Pay by bank
- Bank transfer
- Testing covers the pulsing lights and the controls connected to the reported fault.
- Replacement parts and repair work are priced once the cause is known.
How booking works
Tell us about the job
Tap Book Now and describe the work in the chat. Photos help.
Get your price
You see your price in the chat. A set price is paid at checkout; any other job is quoted first.
Choose your visit
Give your address and when you are free, and the visit is arranged.
Why choose TMB Electrics
- Reviews
- 39
- Rating
- 5.0
- Trading since
- 2012
“I keep things straightforward: you deal with me from the first quote to the final check, with clear advice and no surprises along the way.”
Trevor Bush, TMB Electrics
Book NowWhy do LED lights pulse on a dimmer?
An LED lamp can pulse when the dimmer does not match the lamp load. The dimmer, lamp type and fitting need checking before a replacement is chosen.
Can one loose connection make several lights pulse?
Yes, a loose connection on a shared lighting circuit can affect more than one light. Testing identifies whether the fault is at a fitting, switch, connection or another section of the circuit.
Should I keep using a pulsing light?
Do not use a pulsing light with heat, scorching, smoke, cracking or a burning smell. Leave the light switched off and arrange electrical fault finding.
Can changing the lamp stop the pulsing?
A suitable working lamp can stop pulsing caused by a failed or unsuitable lamp. If the problem remains, the fitting, control and circuit need testing.
Related problems
- Burning plastic smell from electricsA burning plastic smell needs the affected electrical circuit checked before it is used again.
- Circuit breaker keeps trippingA repeated trip usually means a circuit, fitting or connected item needs testing.
- Circuit breaker will not resetA circuit breaker that stays off needs the affected circuit checked for a fault.
- Consumer unit is hotA hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- Consumer unit tripping with nothing plugged inA trip with nothing plugged in usually needs the fixed circuit traced and tested.
- Cooker tripping the electricsA cooker trip can come from its circuit, connection or the appliance itself.
Sources
- BS 7671: IET Wiring Regulations (18th Edition)
- Electrical Safety First: Safety Guidance
- HSE: Electrical Safety at Work
Updated 19 November 2026
