Mains hum in the house
TMB Electrics traces a mains hum in your house to identify the circuit, fitting or connected item causing the sound.
Calls answered 24/7
- 14 years trading
- Local to Banstead
- Clear, upfront quotes
Why is there a mains hum in my house?
A mains hum can come from electrical equipment, a control or a connection that needs testing before repair work begins.
- A dimmer or light fitting is hummingA dimmer, lamp or light fitting can hum when its parts are wearing or do not suit the load it controls. The sound may change when the light is switched or dimmed.
- A charger or appliance is making the soundA charger, transformer or appliance can make a low hum while it is connected. The sound may stop when the item is unplugged, but the item should remain disconnected if it is hot or damaged.
- A consumer unit part is hummingA protective device or other part inside the consumer unit can hum when current flows through it. The consumer unit cover must stay closed until it is tested.
- A connection needs investigationA loose connection can make a humming sound and may heat up when equipment is running. Testing identifies whether the sound comes from fixed wiring, a fitting or a connected item.
What can I check safely when I hear a mains hum?
You can listen for where the sound comes from and note what changes it without opening anything or touching electrical wiring.
- Note where the sound is loudestListen from a safe distance to identify whether the hum is near a socket, light fitting, consumer unit or plug in item. Note which room the sound comes from.
- Unplug portable itemsUnplug chargers, extension leads and portable appliances near the sound without taking them apart. Leave any item with heat marks, damage or a burning smell disconnected.
- Notice what changes the soundNote whether the hum starts with a light, dimmer, appliance or another item. Do not remove covers, touch terminals or operate damaged equipment.
When should I book electrical fault finding for a mains hum?
Book Electrical Fault Finding & Repair when the hum persists, comes from fixed electrical equipment or is accompanied by signs of heat damage.
- The hum comes from the consumer unitA sound from the consumer unit needs testing because the equipment inside controls the property circuits. Leave the cover closed and arrange an electrical visit.
- A fitting is hot, damaged or smells burntStop using a socket, switch, light fitting or appliance with unusual warmth, scorch marks, smoke or a burning smell. Leave the affected circuit off if it is already off.
- The sound continues after items are unpluggedA hum that remains after nearby plug in items are removed may come from fixed wiring or a fitting. Testing identifies the affected circuit and the work needed.
What happens when TMB Electrics investigates a mains hum?
The visit starts by locating the sound, then tests the relevant circuit and explains what needs repair.
- The sound and affected equipment are checkedThe consumer unit, room and equipment linked to the hum are checked to establish where the sound is coming from.
- The relevant circuit is testedTesting separates fixed wiring from connected items and narrows the sound to the fitting, connection or part that needs attention.
- The repair is explainedThe cause is explained once testing identifies it. Any repair beyond the investigation is priced after the work and parts are known.
What does mains hum fault finding cover?
The price covers the time needed to locate the hum and test the circuit, fitting or connected item linked to it. The price changes when testing identifies a failed part, damaged connection, replacement item or repair beyond the diagnostic visit.
From £80 an hour
Included when agreed
- Testing the affected circuit and the fuse board
- Tracing the fault to the socket, fitting, cable or appliance
- Repairs that can be done on the spot with parts carried
- A clear explanation of what was wrong
Not included automatically
- New circuits or upgrades the fault reveals, which are quoted separately
- Repairs to the appliance itself
Ways to pay


- Pay by bank
- Bank transfer
- Testing covers the affected circuit and the equipment linked to the humming sound.
- Replacement parts and repair work are priced once the cause is known.
How booking works
Tell us about the job
Tap Book Now and describe the work in the chat. Photos help.
Get your price
You see your price in the chat. A set price is paid at checkout; any other job is quoted first.
Choose your visit
Give your address and when you are free, and the visit is arranged.
Why choose TMB Electrics
- Reviews
- 39
- Rating
- 5.0
- Trading since
- 2012
“I keep things straightforward: you deal with me from the first quote to the final check, with clear advice and no surprises along the way.”
Trevor Bush, TMB Electrics
Book NowCan a dimmer switch make a humming sound?
Yes, a dimmer can hum when it does not suit the lighting load or when a part inside it is failing. TMB Electrics tests the dimmer, fitting and lighting circuit before recommending a replacement.
Can an appliance cause a mains hum?
Yes, chargers and appliances can make a low hum while connected to power. Unplug the item without opening it and leave it disconnected if the sound stops or the item shows damage.
Is humming from the consumer unit dangerous?
A hum from the consumer unit needs testing because it can come from equipment that protects the circuits. Keep the cover closed and do not touch anything inside the unit.
Will fault finding repair the hum on the visit?
Testing identifies whether the hum comes from fixed wiring, a fitting or a connected item. A repair is priced once the cause and any required parts are known.
Related problems
- Burning plastic smell from electricsA burning plastic smell needs the affected electrical circuit checked before it is used again.
- Circuit breaker keeps trippingA repeated trip usually means a circuit, fitting or connected item needs testing.
- Circuit breaker will not resetA circuit breaker that stays off needs the affected circuit checked for a fault.
- Consumer unit is hotA hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- Consumer unit tripping with nothing plugged inA trip with nothing plugged in usually needs the fixed circuit traced and tested.
- Cooker tripping the electricsA cooker trip can come from its circuit, connection or the appliance itself.
Sources
- Electrical Safety First: Safety Guidance
- BS 7671: IET Wiring Regulations (18th Edition)
- NICEIC: Householder Guidance
Updated 19 November 2026
