Mild electric shock when touching metal

A mild shock from metal can mean a fault in the electrical installation. TMB Electrics tests the affected circuit and metalwork in Banstead to find where voltage is reaching it.

Calls answered 24/7

  • 14 years trading
  • Local to Banstead
  • Clear, upfront quotes

Why do I get a mild shock when touching metal?

A shock or tingling feeling can happen when exposed metal has become live or carries a voltage difference. The cause can be in fixed wiring, electrical equipment or the incoming electricity supply.

  • A fault has reached metalworkA damaged cable, loose connection or failed fitting can allow voltage onto metal parts that should not be live. Testing identifies whether the problem sits in a circuit, fitting or connected equipment.
  • Earthing or bonding needs checkingEarthing and bonding connect metal parts to the electrical safety system. A fault in these connections can leave metal at a different voltage from the ground or another metal surface.
  • A connected appliance has a faultA faulty appliance can put voltage onto its metal casing or affect the circuit supplying it. The appliance stays disconnected while the fixed installation is checked.
  • The incoming supply has a faultA problem affecting the electricity network can create a voltage difference on metalwork. The local electricity network can investigate the supply when testing points outside the property.

What can I check safely after feeling a shock from metal?

Do not touch the metal item again to test it. You can note what happened and move away from the affected area without opening equipment or touching wiring.

  • Move away from the metal itemStop using the metal fitting, appliance or pipe where you felt the shock. Keep other people away from it until the cause has been checked.
  • Note what you touchedWrite down the metal item, room and what electrical equipment was running. Note whether the feeling happened near a tap, appliance, radiator, socket or outdoor metalwork.
  • Look for visible damage without touchingLook for scorch marks, damaged plugs, cracked sockets, loose fittings or water near electrical equipment. Leave anything damaged switched off and disconnected where this can be done without touching metal.

When should I Book Now for a shock from metal?

Book electrical fault finding when you have felt a shock or tingling from any metal item. A repeat shock, burning smell, damaged fitting or shock near water needs prompt attention.

  • You felt a shock from a tap or pipeMetal plumbing can be connected to the electrical safety system. A shock from a tap, pipe or radiator needs the installation and bonding checked.
  • You felt a shock from an applianceA metal appliance casing can become live through a fault. Stop using the appliance and arrange testing of the appliance connection and affected circuit.
  • There is heat, smoke or scorchingA burning smell, smoke, scorch mark or hot fitting means the affected circuit should not be used. Emergency call out and make safe can isolate the immediate danger.

What happens when a mild shock from metal is investigated?

Trevor starts with the metal item and the reported shock, then tests the electrical installation in stages to identify where the voltage is coming from.

  • The affected area is made safeThe relevant circuit is identified and isolated where needed. Trevor checks the reported metal item before testing continues.
  • The installation is testedTesting checks earthing, bonding, circuit protection and the affected circuit. Connected equipment is separated from the fixed installation where needed.
  • The fault is identifiedTrevor explains whether the cause is in a fitting, circuit, connected appliance or the incoming supply. A network fault is reported to the local electricity network.
  • Repair work is set outThe work needed to repair the electrical fault is explained once the cause is known. Testing and documentation are completed where the repair requires them.

What does fault finding for a mild shock from metal cover?

The price covers investigation of the reported shock, the affected metalwork and the electrical circuit or safety connections involved. It changes when testing finds a failed fitting, damaged cable, earthing work, appliance fault or incoming supply problem that needs further work.

From £80 an hour

Included when agreed

  • Testing the affected circuit and the fuse board
  • Tracing the fault to the socket, fitting, cable or appliance
  • Repairs that can be done on the spot with parts carried
  • A clear explanation of what was wrong

Not included automatically

  • New circuits or upgrades the fault reveals, which are quoted separately
  • Repairs to the appliance itself

Ways to pay

  • Visa
  • Mastercard
  • American Express
  • Apple Pay
  • Google Pay
  • Pay by bank
  • Bank transfer
  • Testing covers the reported metal item, the relevant circuit and the electrical safety connections linked to it.
  • Repair work and replacement parts are priced once testing identifies the cause.
  • A fault in the incoming electricity supply is passed to the local electricity network.

View the fault finding cost guide

How booking works

  1. Tell us about the job

    Tap Book Now and describe the work in the chat. Photos help.

  2. Get your price

    You see your price in the chat. A set price is paid at checkout; any other job is quoted first.

  3. Choose your visit

    Give your address and when you are free, and the visit is arranged.

Why choose TMB Electrics

Photo of Trevor BushTrevor BushElectrician
Reviews
39
Rating
5.0
Trading since
2012
“I keep things straightforward: you deal with me from the first quote to the final check, with clear advice and no surprises along the way.”

Trevor Bush, TMB Electrics

Book Now

Mild shock when touching metal questions

Still have a question?

Is a mild electric shock from a metal tap serious?

Yes. A shock from a tap, pipe or other metal item can mean there is a voltage difference that needs checking. Stop touching the item and arrange electrical fault finding.

Can a faulty appliance make metal parts give a shock?

Yes. A fault in an appliance can affect its metal casing or the circuit supplying it. Leave the appliance disconnected and have the appliance connection and fixed wiring checked.

Should I switch off the electricity after feeling a shock?

Leave the affected circuit off if you can identify it without touching metalwork or opening the consumer unit cover. Do not touch the metal item again to test it. Book electrical fault finding to identify the cause.

Can the electricity network cause a shock from metalwork?

Yes. A fault in the incoming supply can create a voltage difference on metalwork. TMB Electrics checks the installation first, then the local electricity network investigates when the fault points to its supply.

Related problems

Sources

Updated 19 November 2026

Book or ask a question

Calls answered 24/7