Power keeps cutting out intermittently
Power that keeps cutting out usually comes from one circuit, fitting or appliance, and TMB Electrics in Banstead tests each until it finds which, then repairs what it can on the visit.
Calls answered 24/7
- 14 years trading
- Local to Banstead
- Clear, upfront quotes
Why does my power keep cutting out?
Power cuts that come and go usually mean a protective switch is reacting to a fault that only shows up under certain conditions.
- A loose connectionA screw that has worked slack at a socket, switch, junction box or the consumer unit, the main electrical board, makes and breaks contact as it warms and cools. Lights may flicker, or a run of sockets goes off and returns.
- An appliance that fails only when it runsA fridge freezer, washing machine or immersion heater can leak current the moment it switches on. The residual current device, or RCD, a safety switch on the board, then drops the power, sometimes when nobody is using anything.
- Damp in an outdoor fittingRain or condensation inside an outside socket, garden light or outbuilding supply lets current escape to earth. The cuts follow wet weather and ease once the fitting dries.
- Too many heavy appliances on one circuitSeveral heavy appliances sharing a circuit can draw more than its breaker allows. The breaker, a switch sized to that circuit, then opens while the other circuits keep their power.
- Worn insulation on a cableInsulation that is breaking down lets small earth faults come and go with temperature, vibration or load. These faults tend to get worse, which is why a repeat cut is worth testing early.
What can I check safely at home?
These checks need nothing more than your eyes, a notebook and the plugs on your portable appliances.
- Keep a log of each cutWrite down the time, the weather, which appliances were running and how long the power stayed off. A pattern, such as cuts after rain, points the electrician at the right circuit.
- Look at the board with the cover shutSee whether one switch on the consumer unit sits differently from the rest, and which one. A single switch down means one circuit, while several can mean an RCD has operated.
- Unplug portable appliances in turnTake plug in appliances out of use one at a time over a few days, starting with the fridge freezer and anything kept outdoors. If the cuts stop, note which item was unplugged.
- Ask the neighboursIf their lights dipped at the same moment, the cause is on the network outside the property. The number 105 reaches the network operator and is free to call.
When should I book an electrician?
Book Now when cuts keep returning with portable appliances out of use, or straight away if anything feels hot or smells burnt.
- The same circuit cuts out againA switch that drops again after you restore power needs testing. Resetting it repeatedly leaves the fault connected to the installation.
- Lights flicker or dim before the power goesUneven light ahead of a cut points to a poor connection that heats as it works, which is worth checking quickly.
- Warmth, buzzing or a burning smellSwitch the circuit off at the board if you can do so safely and stop using it. Where there is immediate danger, ask for an emergency call out and make safe visit.
What happens on the visit?
The visit moves from what you have noticed to the circuit, then to the part that is failing.
- Symptoms firstYou describe what cuts out, when it started and which rooms are affected. Pictures of the consumer unit and the affected room save time.
- Testing the circuit and the boardThe affected circuit is isolated, meaning switched off and made dead, then tested along its length together with the consumer unit until the fault narrows to one place.
- Tracing the fault to a partThe fault is tied to a socket, fitting, cable or appliance. If an appliance is responsible, we tell you which one, and its repair sits outside the visit.
- Repair on the spot or a written priceSimple repairs with parts carried, such as sockets, switches, breakers and RCDs, can be done straight away. Bigger work is priced in writing first, and anything dangerous is made safe the same day.
What does fault finding cost and what changes it?
Fault finding is charged by the hour, so the price covers time spent testing the circuit and consumer unit and tracing the fault to its cause. An intermittent fault can take longer to catch than a constant one, and that changes the total.
From £80 an hour
Included when agreed
- Testing the affected circuit and the fuse board
- Tracing the fault to the socket, fitting, cable or appliance
- Repairs that can be done on the spot with parts carried
- A clear explanation of what was wrong
Not included automatically
- New circuits or upgrades the fault reveals, which are quoted separately
- Repairs to the appliance itself
Ways to pay


- Pay by bank
- Bank transfer
- Parts and any permanent repair are priced once the cause is found, before that work starts.
- A note of when each cut happened shortens the testing time.
- New circuits or upgrades the fault reveals, and repairs to an appliance itself, are quoted separately.
How booking works
Tell us about the job
Tap Book Now and describe the work in the chat. Photos help.
Get your price
You see your price in the chat. A set price is paid at checkout; any other job is quoted first.
Choose your visit
Give your address and when you are free, and the visit is arranged.
Why choose TMB Electrics
- Reviews
- 39
- Rating
- 5.0
- Trading since
- 2012
“I keep things straightforward: you deal with me from the first quote to the final check, with clear advice and no surprises along the way.”
Trevor Bush, TMB Electrics
Book NowDoes one particular appliance make my power go off?
It can. The appliance may be leaking current or overloading its circuit. Testing separates a fault in the appliance from a fault in the wiring or fitting that feeds it.
Can a new consumer unit stop the cuts?
Only when the board itself is failing. A leaking appliance or damp outdoor fitting would still cut the power on a new one, so the cause is tested first and any board work is priced separately.
How many times can I reset a tripped switch?
Once is fine to see whether it was a one off. If it drops again, leave that circuit off and Book Now, because repeated resetting leaves a fault connected.
Can you find a fault that is not happening during the visit?
Often, yes, because a leaking circuit or a poor connection can show on test readings while the power is on. If every reading passes, you receive the results and know what to record when the next cut happens.
Is a burning smell an emergency?
Yes. Switch that circuit off at the consumer unit if you can do so safely, stop using it and call. An emergency call out and make safe visit isolates the danger and keeps the safe circuits on.
Related problems
- Burning plastic smell from electricsA burning plastic smell needs the affected electrical circuit checked before it is used again.
- Circuit breaker keeps trippingA repeated trip usually means a circuit, fitting or connected item needs testing.
- Circuit breaker will not resetA circuit breaker that stays off needs the affected circuit checked for a fault.
- Consumer unit is hotA hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- Consumer unit tripping with nothing plugged inA trip with nothing plugged in usually needs the fixed circuit traced and tested.
- Cooker tripping the electricsA cooker trip can come from its circuit, connection or the appliance itself.
Sources
- BS 7671: IET Wiring Regulations (18th Edition)
- HSE: Electrical Safety at Work
- Electrical Safety First: Safety Guidance
Updated 20 November 2026
