Pull cord light switch not working
A faulty pull cord switch, loose connection or lighting circuit fault can stop a bathroom light working. TMB Electrics traces the fault in Banstead and explains the repair needed.
Calls answered 24/7
- 14 years trading
- Local to Banstead
- Clear, upfront quotes
Why is my pull cord light switch not working?
A pull cord switch can fail inside the casing, lose a connection or sit on a lighting circuit with another fault.
- The pull cord switch has worn outThe switch mechanism can fail after repeated use, leaving the light off even when the cord is pulled.
- A connection at the switch has failedA loose or heat damaged connection can stop power reaching the light fitting or make the switch unreliable.
- The light fitting has a faultA failed lamp holder, light fitting or connection at the ceiling can leave the light off when the switch itself still operates.
- The lighting circuit has switched offA fault elsewhere on the lighting circuit can trip its protective device and leave the pull cord switch without power.
What can I check safely before booking?
You can check the light and the visible condition of the switch without opening the fitting or touching mains wiring.
- Try a known working lampSwitch the light off, fit a known working lamp of the correct type, then try the pull cord again.
- Check whether other lights workSee whether other lights in the bathroom or nearby rooms still work. This helps show whether the problem is limited to one fitting.
- Look for visible damageDo not use the switch or light if there is cracking, scorching, smoke, a burning smell or unusual warmth.
When should I book a pull cord switch repair?
Book Now when a new lamp does not restore the light, the circuit trips or the switch shows visible damage.
- The light stays off after changing the lampA working replacement lamp with no light points to the switch, fitting or lighting circuit needing testing.
- The lighting circuit tripsA protective device that switches off again needs investigation. Leave the affected circuit off rather than repeatedly restoring power.
- The switch feels loose or damagedA loose pull cord, cracked casing, scorch mark or burning smell needs the switch left unused until it is checked.
What happens when a pull cord switch is not working?
The visit starts with the switch and light, then follows the lighting circuit until the fault is identified.
- The lighting circuit is identifiedThe consumer unit, pull cord switch and light fitting are checked to establish which circuit supplies them.
- The switch and fitting are testedTesting separates a failed pull cord switch from a fault at the light fitting, connection or another part of the circuit.
- The fault is explainedThe failed part and the work needed are explained after testing identifies the cause.
What does pull cord switch fault finding cover?
The price covers time spent testing the pull cord switch, light fitting and affected lighting circuit to identify why the light has stopped working. The price changes if testing finds a replacement switch, failed fitting, damaged connection, cable fault or repair work beyond the investigation.
From £80 an hour
Included when agreed
- Testing the affected circuit and the fuse board
- Tracing the fault to the socket, fitting, cable or appliance
- Repairs that can be done on the spot with parts carried
- A clear explanation of what was wrong
Not included automatically
- New circuits or upgrades the fault reveals, which are quoted separately
- Repairs to the appliance itself
Ways to pay


- Pay by bank
- Bank transfer
- Testing covers the pull cord switch, light fitting and the affected lighting circuit.
- Replacement parts and repair work are priced once testing identifies the cause.
How booking works
Tell us about the job
Tap Book Now and describe the work in the chat. Photos help.
Get your price
You see your price in the chat. A set price is paid at checkout; any other job is quoted first.
Choose your visit
Give your address and when you are free, and the visit is arranged.
Why choose TMB Electrics
- Reviews
- 39
- Rating
- 5.0
- Trading since
- 2012
“I keep things straightforward: you deal with me from the first quote to the final check, with clear advice and no surprises along the way.”
Trevor Bush, TMB Electrics
Book NowCan a pull cord switch stop the bathroom light working?
Yes. The switch can fail internally or lose a connection, so power does not reach the light fitting. Testing confirms whether the fault is at the switch or elsewhere on the lighting circuit.
Can I replace a bathroom pull cord switch myself?
A pull cord switch connects to mains wiring, so it should remain closed until it is tested. A replacement starts with isolating and checking the lighting circuit.
Why does the bathroom light trip the circuit?
A fault at the pull cord switch, light fitting or another part of the lighting circuit can operate the protective device. Testing identifies the affected part before repair work is priced.
Related problems
- Burning plastic smell from electricsA burning plastic smell needs the affected electrical circuit checked before it is used again.
- Circuit breaker keeps trippingA repeated trip usually means a circuit, fitting or connected item needs testing.
- Circuit breaker will not resetA circuit breaker that stays off needs the affected circuit checked for a fault.
- Consumer unit is hotA hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- Consumer unit tripping with nothing plugged inA trip with nothing plugged in usually needs the fixed circuit traced and tested.
- Cooker tripping the electricsA cooker trip can come from its circuit, connection or the appliance itself.
Sources
Updated 19 November 2026
