RCD test button not working
An RCD is the fuse board switch that cuts power in a shock. When its test button does nothing, TMB Electrics in Banstead tests the device and names the part that failed.
Calls answered 24/7
- 14 years trading
- Local to Banstead
- Clear, upfront quotes
Why does my RCD test button do nothing?
The button does nothing when the device has no live supply to test, when its latch has stuck, or when the small test circuit inside it has broken. An RCD is the switch that cuts power when current leaks to earth.
- The device is off or has no supplyThe button only acts on a device that is switched on and live. A main switch that is down, a power cut or a lever already in the off position leaves nothing for the press to open.
- The latch has stuckAn RCD is a mechanical switch, and one that has never been pressed can stiffen with age and dust. The latch then stays closed when the button asks it to let go, so the lever stays up.
- The test circuit inside has brokenThe button works by sending a tiny deliberate leak through the device. If the button contact or the resistor behind it has failed, no leak is made and the device appears to ignore the press.
- A surge, heat or damp has damaged itA voltage surge, a loose connection running hot or damp inside a garage or outbuilding board can wear out the parts that sense a leak. A damaged device may ignore the button and a real fault alike.
- It is an RCBO on one circuitAn RCBO combines a breaker, the switch that opens on overload, with an RCD for a single circuit. Its own test button can fail while the devices beside it still work, so only that circuit loses its leak test.
What can I check safely when the RCD test button does nothing?
Read the switches on the front of the consumer unit and press the test button once. The cover stays on, the screws stay in and the cables stay untouched.
- Check the board has powerSwitch a light on and look at the main switch, the widest switch on the front of the board. A press during a power cut or with the main switch down tells you nothing about the RCD.
- Press the test button onceUse a dry finger and press the button marked T firmly for a second. A working RCD drops its lever with a click and the circuits it covers go off. Lift the lever back up afterwards.
- Note what the device coversWrite down which device failed, its rating if printed on the front, and which rooms it feeds. A photograph of the front of the board helps when you call.
- Leave a lever that will not stay upIf the lever drops again, leave it down and do not hold or tape it. Warmth, a buzz or a burning smell at the board means stop pressing, keep the cover on and leave the cables alone.
When should I book an electrician for an RCD test button that does nothing?
Book as soon as a live RCD stays on after a firm press of its button, because the circuits behind it have no shock protection that has been shown to work.
- The button does nothingThe main switch and the RCD lever are both up and one firm press leaves the lever up. The device has not shown it can open, so keep outdoor tools off those circuits and Book Now.
- The lever drops but will not stay upThe button has worked, so a fault on one of its circuits is holding the device off. Leave it down and note which rooms lost power.
- The board is hot, buzzing or smells burntHeat or noise at the board points to a failing connection. Keep the cover on, stay clear of the board and arrange a visit straight away.
What happens on a visit for an RCD test button that does nothing?
We look at the front of the board, time the RCD with a tester, test the circuits it covers and then replace the failed device or make the circuits safe.
- What the button didWe ask what happened when you pressed it and which rooms went off, then look over the front of the board for heat marks or loose parts.
- Timing the RCDA tester plugs into a socket on a protected circuit and passes a measured leakage current. It records how long the device takes to cut power, and a device that stays on has failed.
- Testing the circuits behind itAn insulation test on each circuit shows whether a leak is waiting to trip a new device. We open the board for this only once it is safe to do so.
- Replacing the device or making it safeWe carry RCDs among our common parts, so a failed device can often be swapped for a matching one and timed again. Anything bigger gets a written price, and the right certificate or test record follows completed work.
How is an RCD test button fault charged?
Fault finding is charged by the hour for the time spent testing the RCD and the circuits behind it. A replacement device, any extra work the tests uncover and a certificate when the job needs one change what you pay.
From £80 an hour
Included when agreed
- Testing the affected circuit and the fuse board
- Tracing the fault to the socket, fitting, cable or appliance
- Repairs that can be done on the spot with parts carried
- A clear explanation of what was wrong
Not included automatically
- New circuits or upgrades the fault reveals, which are quoted separately
- Repairs to the appliance itself
Ways to pay


- Pay by bank
- Bank transfer
- Parts and a permanent repair are priced separately once the cause is found.
- A matching RCD is added to the testing time only when the tests show the device has failed.
- Bigger work, such as a new consumer unit, gets its own written price before it starts.
How booking works
Tell us about the job
Tap Book Now and describe the work in the chat. Photos help.
Get your price
You see your price in the chat. A set price is paid at checkout; any other job is quoted first.
Choose your visit
Give your address and when you are free, and the visit is arranged.
Why choose TMB Electrics
- Reviews
- 39
- Rating
- 5.0
- Trading since
- 2012
“I keep things straightforward: you deal with me from the first quote to the final check, with clear advice and no surprises along the way.”
Trevor Bush, TMB Electrics
Book NowHow often should I press the RCD test button?
The notice on the consumer unit asks you to test twice a year. Pressing the button when the clocks change is an easy habit. Lift the lever back up straight afterwards.
Is it safe to keep using the power until the electrician comes?
Lights and sockets keep working, but the shock protection on those circuits is unproven. Leave lawnmowers, pressure washers and outdoor extension leads unplugged until the device has been tested.
Will I need a whole new fuse board?
Often a failed RCD is swapped by itself. We test first, and a bigger job such as a new consumer unit is priced in writing before any work begins.
Can I phone about it outside office hours?
Yes, the booking line answers calls at any time. Say which device failed and which rooms it covers, and the visit is set up from there.
Related problems
- Burning plastic smell from electricsA burning plastic smell needs the affected electrical circuit checked before it is used again.
- Circuit breaker keeps trippingA repeated trip usually means a circuit, fitting or connected item needs testing.
- Circuit breaker will not resetA circuit breaker that stays off needs the affected circuit checked for a fault.
- Consumer unit is hotA hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- Consumer unit tripping with nothing plugged inA trip with nothing plugged in usually needs the fixed circuit traced and tested.
- Cooker tripping the electricsA cooker trip can come from its circuit, connection or the appliance itself.
Sources
- Electrical Safety First: Your questions answered (Can an RCD fail?)
- IET: BS 7671 FAQs, Consumer units and protective devices
- Electrical Safety First: Advice for older and vulnerable people (finding the RCD Test button)
Updated 20 November 2026
