RCD tripping when it rains
Rain can trigger an RCD when water reaches an outdoor circuit or fitting. TMB Electrics tests the affected installation in Banstead and identifies the part causing the trip.
Calls answered 24/7
- 14 years trading
- Local to Banstead
- Clear, upfront quotes
Why does my RCD trip when it rains?
An RCD is a safety switch that turns power off when electricity leaks from its intended path. Rain can reveal a fault where water reaches outdoor electrical equipment.
- Water in an outdoor socketWater inside an outside socket or its cover can create a path for current to leak. The RCD can then turn off the circuit when the socket becomes wet.
- A damp outside light fittingA wall light, garden light or its connection can trip the RCD when water reaches damaged seals, cable entries or terminals.
- A damaged outdoor cableDamage to a cable supplying outdoor lighting, a garage or garden equipment can allow moisture to affect the circuit. Testing identifies the affected section.
- An item connected outsideA plugged in item on an outdoor socket can have a fault that appears when it is wet. The item and the fixed circuit need separating during testing.
What can I check safely when rain trips the RCD?
You can note the weather, affected areas and connected items without opening equipment or touching mains wiring.
- Note what lost powerCheck which rooms, sockets, lights and outdoor equipment lost power. Note whether the trip follows heavy rain, light rain or use of a particular outside item.
- Unplug outdoor itemsUnplug garden equipment, extension leads and chargers from outdoor sockets if you can do so without standing in water. Leave damaged items disconnected.
- Look for visible damageLook without touching for broken socket covers, cracked fittings, scorch marks, smoke or a burning smell. Leave the affected circuit off if it is already off.
When should I book electrical fault finding?
Book Now when the RCD trips again after outdoor items are unplugged, when rain repeatedly causes the trip, or when any fitting shows damage.
- The RCD trips after rainA repeated wet weather trip needs testing because water may be reaching a circuit, fitting or cable that should remain protected.
- Outdoor power will not stay onA circuit that turns off again after items are unplugged needs tracing through the fixed installation and connected equipment.
- There is heat, smoke or scorchingA burning smell, smoke, scorching or unusual warmth at an electrical fitting means the affected circuit should remain unused until it is checked.
What happens when an RCD trips in the rain?
The visit starts with the consumer unit, the weather pattern and the outdoor equipment affected by the trip. Testing then narrows the fault to the relevant part.
- The affected circuits are identifiedThe consumer unit is checked against the areas that lost power to establish which circuits sit behind the tripped RCD.
- Outdoor circuits are testedTesting checks the fixed wiring, outdoor sockets, lights and connected equipment to separate the fault from the rest of the installation.
- The cause is explainedOnce the fault is identified, the failed part and any repair needed are explained before further work is priced.
What does rain related RCD fault finding cover?
The price covers the time needed to investigate the RCD trip, identify the affected circuit and test the outdoor fittings or equipment linked to the fault. It changes when testing finds a failed fitting, damaged cable, connected item or repair that needs replacement parts.
From £80 an hour
Included when agreed
- Testing the affected circuit and the fuse board
- Tracing the fault to the socket, fitting, cable or appliance
- Repairs that can be done on the spot with parts carried
- A clear explanation of what was wrong
Not included automatically
- New circuits or upgrades the fault reveals, which are quoted separately
- Repairs to the appliance itself
Ways to pay


- Pay by bank
- Bank transfer
- Testing covers the tripped RCD, affected circuits and the outdoor equipment linked to the fault.
- Replacement parts and repair work are priced after the cause is known.
- A fault inside a plugged in item may need separate repair or replacement.
How booking works
Tell us about the job
Tap Book Now and describe the work in the chat. Photos help.
Get your price
You see your price in the chat. A set price is paid at checkout; any other job is quoted first.
Choose your visit
Give your address and when you are free, and the visit is arranged.
Why choose TMB Electrics
- Reviews
- 39
- Rating
- 5.0
- Trading since
- 2012
“I keep things straightforward: you deal with me from the first quote to the final check, with clear advice and no surprises along the way.”
Trevor Bush, TMB Electrics
Book NowCan rain make an RCD trip?
Yes. Water in an outdoor socket, light fitting, cable or connected item can cause current to leak and operate the RCD. Testing identifies whether the fault is in the fixed installation or an item plugged into it.
Should I keep resetting an RCD that trips when wet?
No. If it trips again, leave the affected circuit unused where possible. Unplug outdoor items safely, then book electrical fault finding to identify what is causing the trip.
Can an outside light cause the RCD to trip?
Yes. Water can reach an outside light fitting or its cable connection and make the RCD operate. The fitting and its circuit are tested to find where the fault is occurring.
Related problems
- Burning plastic smell from electricsA burning plastic smell needs the affected electrical circuit checked before it is used again.
- Circuit breaker keeps trippingA repeated trip usually means a circuit, fitting or connected item needs testing.
- Circuit breaker will not resetA circuit breaker that stays off needs the affected circuit checked for a fault.
- Consumer unit is hotA hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- Consumer unit tripping with nothing plugged inA trip with nothing plugged in usually needs the fixed circuit traced and tested.
- Cooker tripping the electricsA cooker trip can come from its circuit, connection or the appliance itself.
Sources
- BS 7671: IET Wiring Regulations
- HSE: Electrical Safety at Work
- Electrical Safety First: Safety Guidance
Updated 19 November 2026
