Security light not coming on
A security light that stays dark can have a failed lamp, sensor or outdoor circuit fault. TMB Electrics traces the cause and tests the affected lighting safely.
Calls answered 24/7
- 14 years trading
- Local to Banstead
- Clear, upfront quotes
Why is my security light not coming on?
A security light can stay off because the lamp, movement sensor or electrical supply has failed. Testing separates the fitting fault from the circuit that feeds it.
- The lamp has failedA failed lamp or LED unit can leave the fitting dark even when the circuit has power. The fitting needs checking before a replacement is chosen.
- The movement sensor is not detecting movementA PIR sensor detects body heat and movement to switch the light on. Dirt, damage or a failed sensor can stop the light responding.
- The outdoor circuit has a faultWater, damage or a failed connection at the fitting can interrupt the supply. The circuit and fitting are tested to find where power stops.
What can I check safely before booking?
You can check the light from ground level without opening the fitting, removing covers or touching wiring.
- Check whether nearby outdoor lights workNote whether other outside lights or sockets still work. This helps show whether the problem is limited to one security light.
- Clear leaves and cobwebs from the sensorBrush away loose dirt around the sensor without moving or opening the fitting. A blocked sensor may not detect movement properly.
- Look for visible damageDo not use the light if the fitting has cracking, scorch marks, loose parts or water inside. Leave it switched off if it is already off.
When should I book a security light repair?
Book Now when the light stays dark after safe checks, keeps tripping the circuit, or shows damage that needs electrical testing.
- The light does not respond to movementA light that remains off when movement passes the sensor needs its sensor, lamp and supply tested.
- The circuit switches offA breaker or RCD that switches off when the outdoor light is used needs investigation. Leave the affected circuit unused.
- The fitting is damaged or wet insideCracking, scorch marks or visible water in the fitting needs electrical fault finding before the light is used again.
What happens when a security light is repaired?
The visit starts with the affected fitting and its supply, then testing identifies whether the lamp, sensor, connection or circuit needs work.
- The light and circuit are checkedThe fitting, switch controls and consumer unit are checked to identify the circuit that supplies the security light.
- The fault is tracedTesting checks the supply, sensor and fitting to identify why the light is not coming on.
- The required repair is explainedThe failed part or circuit fault is explained once it is identified. Repair work is priced when the parts and work needed are known.
What does security light fault finding cover?
The price covers the time needed to test the security light, its sensor and the outdoor circuit that feeds it. The price changes when testing finds a failed fitting, damaged cable, connection fault or repair that needs replacement parts.
From £80 an hour
Included when agreed
- Testing the affected circuit and the fuse board
- Tracing the fault to the socket, fitting, cable or appliance
- Repairs that can be done on the spot with parts carried
- A clear explanation of what was wrong
Not included automatically
- New circuits or upgrades the fault reveals, which are quoted separately
- Repairs to the appliance itself
Ways to pay


- Pay by bank
- Bank transfer
- Testing covers the security light and the electrical circuit linked to the fault.
- Replacement fittings, parts and repair work are priced after the cause is known.
How booking works
Tell us about the job
Tap Book Now and describe the work in the chat. Photos help.
Get your price
You see your price in the chat. A set price is paid at checkout; any other job is quoted first.
Choose your visit
Give your address and when you are free, and the visit is arranged.
Why choose TMB Electrics
- Reviews
- 39
- Rating
- 5.0
- Trading since
- 2012
“I keep things straightforward: you deal with me from the first quote to the final check, with clear advice and no surprises along the way.”
Trevor Bush, TMB Electrics
Book NowWhy does my security light stay off at night?
The lamp, sensor or circuit may have failed. A PIR sensor can also fail to detect movement, while a supply fault can leave the fitting without power. Testing identifies which part needs repair.
Can rain stop a security light working?
Water entering an outdoor fitting or connection can cause a fault. The light may stay off, trip the circuit or work only sometimes. The fitting and circuit need testing before the light is used again.
Can I replace the bulb in my security light?
You can replace a removable lamp only when the fitting instructions allow it and the power is switched off at the relevant control. Do not open a sealed LED fitting or touch any wiring. A sealed fitting that stays dark needs checking.
Why does my security light come on but not stay on?
The sensor setting, the lamp or the fitting can cause this pattern. A sensor may detect movement but fail to hold the light on, while a connection fault can interrupt the supply. Testing finds the cause.
Related problems
- Burning plastic smell from electricsA burning plastic smell needs the affected electrical circuit checked before it is used again.
- Circuit breaker keeps trippingA repeated trip usually means a circuit, fitting or connected item needs testing.
- Circuit breaker will not resetA circuit breaker that stays off needs the affected circuit checked for a fault.
- Consumer unit is hotA hot consumer unit can point to an overloaded circuit or failing connection that needs testing.
- Consumer unit tripping with nothing plugged inA trip with nothing plugged in usually needs the fixed circuit traced and tested.
- Cooker tripping the electricsA cooker trip can come from its circuit, connection or the appliance itself.
Sources
Updated 19 November 2026
