Storage heater not charging overnight

A storage heater that stays cold may have a supply, control or heater fault. TMB Electrics provides Electrical Fault Finding & Repair in Banstead to identify the affected circuit and explain the repair needed.

Calls answered 24/7

  • 14 years trading
  • Local to Banstead
  • Clear, upfront quotes

Why is my storage heater not charging overnight?

A storage heater may not charge because its overnight supply, timer control, circuit protection or internal heating element has failed.

  • The overnight supply is offStorage heaters commonly use an off peak electricity supply that becomes live overnight. A fault at the consumer unit, meter equipment or heater circuit can stop that supply reaching the heater.
  • The heater control is set incorrectlyA storage heater has controls for stored heat and daytime output. A low storage setting can leave the heater with little heat available the following day.
  • A timer or control has failedA timer or switching control can fail to bring the heater circuit on during the charging period. Testing identifies whether the control receives and passes the supply.
  • The heater circuit has a faultA loose connection, damaged cable or failed protective device can interrupt the supply to one heater. Testing traces the fixed circuit without relying on the heater symptoms alone.
  • The heating element has failedThe heating element converts electricity into stored heat inside the appliance. A failed element can leave the heater cold even when the circuit and controls appear to be working.

What can I check safely before booking?

You can check the heater controls and note the pattern without opening the appliance, removing covers or touching any mains wiring.

  • Check the storage controlCheck that the storage control is not set to its lowest setting. Note its position before changing nothing else, so the heater setting can be considered during testing.
  • Note whether other heaters are affectedCheck whether one heater is cold or whether every storage heater is affected. This helps separate a fault at one appliance from a problem with the shared overnight supply.
  • Check the consumer unit without touching itLook for a switch at the consumer unit that is already off. Do not remove the cover or keep restoring a switch that turns off again.
  • Look for visible heat damageDo not use the heater if its cable, switch or nearby wall shows scorching, cracking, smoke, a burning smell or unusual warmth. Leave it off and arrange electrical testing.

When should I book a storage heater repair?

Book Electrical Fault Finding & Repair when the heater remains cold after its charging period, the supply will not stay on or visible damage is present.

  • The heater is cold every morningA heater that stays cold after its normal charging period needs testing of the supply, controls and heating element. The fault cannot be confirmed from the control settings alone.
  • Only one heater has stopped chargingOne cold heater can point to a fault in its own circuit, control or element. Testing identifies where the supply stops and whether the appliance needs separate repair.
  • The circuit switches off againA circuit that will not remain on needs investigation. Repeated resetting can leave a fault connected to the installation.
  • There is heat damage or a burning smellScorching, smoke, unusual warmth or a burning smell around a heater, switch or cable needs urgent attention. Stop using the affected heater and leave its circuit off where possible.

What happens when a storage heater is not charging?

The visit starts with the heater and its supply, then testing identifies whether the fault is in the fixed wiring, control or appliance.

  • The heater circuit is identifiedThe consumer unit, heater controls and affected appliance are checked to establish how the heater receives its overnight supply.
  • The fixed supply is testedTesting checks the circuit and controls that feed the heater. This identifies whether power reaches the appliance when the system should charge.
  • The fault is narrowed downThe results separate a fixed wiring fault from a fault within the heater. Any failed control, connection or appliance part is explained before repair work is priced.
  • The repair is explainedThe work needed is set out once the cause is known. Repairs to the fixed electrical installation and repairs to the heater itself are identified separately.

What does storage heater fault finding cover?

The price covers the time needed to test the storage heater supply, relevant controls and fixed circuit, then identify why the heater is not charging overnight. The price changes when testing finds a failed control, damaged wiring, replacement part or repair beyond the diagnostic visit.

From £80 an hour

Included when agreed

  • Testing the affected circuit and the fuse board
  • Tracing the fault to the socket, fitting, cable or appliance
  • Repairs that can be done on the spot with parts carried
  • A clear explanation of what was wrong

Not included automatically

  • New circuits or upgrades the fault reveals, which are quoted separately
  • Repairs to the appliance itself

Ways to pay

  • Visa
  • Mastercard
  • American Express
  • Apple Pay
  • Google Pay
  • Pay by bank
  • Bank transfer
  • Testing covers the affected heater circuit, controls and electrical supply.
  • Fixed wiring repairs and replacement parts are priced after the cause is known.
  • A fault inside the storage heater may need separate appliance repair or replacement.

View the fault finding cost guide

How booking works

  1. Tell us about the job

    Tap Book Now and describe the work in the chat. Photos help.

  2. Get your price

    You see your price in the chat. A set price is paid at checkout; any other job is quoted first.

  3. Choose your visit

    Give your address and when you are free, and the visit is arranged.

Why choose TMB Electrics

Photo of Trevor BushTrevor BushElectrician
Reviews
39
Rating
5.0
Trading since
2012
“I keep things straightforward: you deal with me from the first quote to the final check, with clear advice and no surprises along the way.”

Trevor Bush, TMB Electrics

Book Now

Storage heater not charging overnight questions

Still have a question?

Why is my storage heater cold in the morning?

A cold heater may not be receiving its overnight supply, or it may have a fault in its control, circuit or heating element. Testing identifies whether the issue is in the fixed electrical installation or the heater itself.

Can one storage heater stop charging while the others work?

Yes. One heater can have its own fault in the appliance, its control or the circuit that feeds it. The working heaters help show whether the shared overnight supply is still available.

Should I keep turning the heater controls up?

No. A higher storage setting cannot repair a failed supply, control or heating element. Leave the controls in a known position and arrange testing if the heater remains cold.

Can a storage heater trip the electricity?

Yes. A fault in the heater or its electrical supply can cause a circuit or safety switch to turn off. Leave the affected circuit unused if it turns off again and book fault finding.

Related problems

Sources

Updated 19 November 2026

Book or ask a question

Calls answered 24/7